Here is my problem. I have several fields located on a form. The user has a problem finding the curser on what field its on. I did ok with the text fields, but I need to come up with something for the check boxes. Any Ideas
The code below works good for text fields. But I need to do the same for Check Boxes or the Check Box Label that is associated with the check Box.
Private Sub Ctl4bCode_Enter()
Me.Ctl4bCode.BackColor = RGB(255, 0, 0)
End Sub
Private Sub Ctl4bCode_Exit(Cancel As Integer)
Me.Ctl4bCode.BackColor = RGB(255, 255, 255)
I have a report rptEnvelopes to print envelopes. In the report I have text box called txtRecipientName . I have a qryAddress with fields notNo, IDCard, Fname, Lname where notNo is a field that takes its value from a combo box called cboSelectEnvelope from a form frmPrinting. I then wrote the following code:
Private Sub Report_Open(Cancel As Integer)
Dim dbLet As Database Dim rsLet As Recordset Dim sqlLet, criteriaLet, txtRecipientName As String Dim stLet as String
Set dbLet = CurrentDb sqlLet = " Select DISTINCT IDCard FROM qryAddress " & _ "WHERE notNo = " & Forms!frmPrinting!cboSelectEnvelope Set rsLet = dbLet.OpenRecordset(sqlLet, dbOpenSnapshot) If Not rsLet.EOF Then rsLet.MoveLast stLet = "rptEnvelope" criteriaLet = "notNo=" & Forms!frmPrinting!cboSelectEnvelopeReports 'This is where I go wrong: 'How to I declare txtRecipientName, on rptEnvelope, to get the value rsLet!Fname&" "& rsLet!Lname DoCmd.OpenReport stLet, acViewPreview, , criteriaLet End If rsLet.CLOSE
NOTE: Private Sub Report_Open is called from the On Open Event of rptEnvelope
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
On the OnLoad event of a form, is it possible for the program to traverse or go through every single record (maybe with a while loop)?? If so, please send me the exact syntax.
Also, I want to update the tables on the back end. Is it possible to this in the be file? Where specifically would I have to put the code?
I have form "frmOrders" (Datasheet), columns: "id_order", "nameOfOrder", "worker", "term", "changes"I don't know it's possible or not.
e.g. I have in some record values like this Id_order - 2 NameOfOrder - folder Worker - John term (this field is empty)
some day I will change e.g. nameOfOrder from "folder" to "business card" and term from empty to 2013-07-13. So two records was changed. After changes, record "changes" should has value like this "folder; term" - because I changed these columns.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change() Me.Requery Me.cboCourseName.Requery Me.Check178.Requery End Sub
If, on the startup form of the attached mdb, you type anything in any of the text boxes of the FPersonale subform(which, in form view, is labeled "Shift schedule") you get a message titled "Write Conflict" saying that during the current session the record had been modified by another user, asking to choose between saving the record, copying the edits to the clipboard or discarding the edits. I've tried to get rid of the message by putting Me.Requery at the end of the text boxes' AfterUpdate event code but the message still pops up.
How to write Sample Code to Retrieve the Current User Name?I have done for short name only and I need it full
Private Declare Function apiGetUserNameWindows Lib "advapi32.dll" Alias _ "GetUserNameA" (ByVal lpBuffer As String, nSize As Long) As Long Function fOSUserName() As String Dim lngLen As Long, lngX As Long Dim strUserName As String
Hi, I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks. By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
Hi In my tables I have set a field to Yes/No and the format to be True/False. When I activate the table it shows the field as a checkbox, however when I create a List Box on a form to that table it displays the fields as True/False, how can I get the list box to also display the field as a checkbox.
I created a check box on a form. The problem is once the box is checked, it cannot be unchecked. Seems like there should be some validation running in the background that checks the state of the check box.
I have the value of the check box to equal 1.
If the field is null, then clicking on the check box assigns the value and turns on the check mark.
If the field is already 1, then clicking on the check box deletes the value and unchecks the box.
Can someone provide me with the vba code that makes the check box operate correctly? I appreciate your help.
Is there a way to make sure that one of two box is checked. And if one is checked the other could not be. For example. If I have a check box called Father and one called mother. If father was checked Mother could not be checked, and visversa.
I have 4 check boxes represent 4 grade levels. When I click on a grade I have a query run for me a list of all 9th graders or 10th graders or both together. When I run the form for the first time, all four boxes are check, when I unclick all of them and I click which ones I want the form does not work. But if I leave them click the report will work. Basically what is happening is when I unclick them, the lose their value. I have the check box set up with a Default Value as "09" or "10" base on what Grade Level there is. So my two questions are, how do I keep the value of the check boxes after I unclick and click again and Secondly, is there a way to have the boxes unchecked when I run the program?
I have a column which are check boxes to indicate whether plants are available for sale or not. The problem is how do i put code or symbol in to check all boxes or to uncheck all boxes.
I have a form based on a table (master) with a cbo which returns yes or no according to what users select.
I then have another form which get's its data from a query based on the above table (master). This time, the value I have selected in the previous form using the cbo, should be displayed using a check box.
This is how I would like it to work:
If Me.cbo = yes (meaning that the value selected is yes), then
check box should show be checked.
If Me.cbo indicated NO, then, the check box should not be checked.
I have a table that contains the following fields: township male - yes/no female - yes/no number of kids
I need to create a query that will give me the count of males and females and sum of number of kids - all grouped by township.
I have created 3 separate queries that calculate each part and they work. My question is how do I display the results of all these queries in one report, all grouped by townships?
Or if there's a way to create one query that will add all of this up? when I tried to create one query, the check boxes were not calculated properly, because Access did not distinguish between filled and empty checkboxes and would just count them all...
Any ideas or suggestions would be really appreciated.
I was just wondering if there is any way that I can create a query to find all of the records which have a tick box checked.
There is a tick box on each form and I want to know what I type in the 'Criteria' box is Query Design so that I can quickly and easily search for all those which are checked.
I know that in a normal query, to search for a particular object you can type it in (e.g. 'Mugs' - will find all the records under the name of 'Mugs' when typed under the right heading) but i'm unsure of what to type in under the 'Target' heading to make it find all those which are checked.
I have a form I am creating from a query that has numerous yes/no checkboxes. I have been able to enter over 2/3rds of the yes/no boxes. However, I'm trying to enter the last of these into the form, and they suddenly change to text boxes. When I go back and check the query, they have also changed to text boxes there as well. I've checked and re-entered the data from the table to the query and finally to the form again. Same thing happens everytime. Any idea what's going on here? Thank you ~
hi guys i have 2 questions 1. how can i count selected or not selected checkbox fields (yes/No) in a tex box ?! ( for example we have a 2 yes/no fields that are Male and another Female , and i want to make a form that shows number of males and number of females that selected in a text box )
2. how can i make a search form that when i chose check boxes and then Search button it will show me the list of selected checkbox that selected in main form
( for example if we have 3 checkboxes 1.(low) 2.(mid) 3.(high) in main database and form , and if i want to make a search form that shows me list of enterees that is (Mid) )
I appologize that this may be a very remedial question, and that many previous threads pertained to the general topic of check boxes, but as I am new to the world of access, I did not find any threads which i could apply to my following question. I would greatly appreciate any help and guidance :)
What I am trying to accomplish is to set up a subform in which each record is linked to a check box. The check box would be used to select unique records for an upcomming search. My problem: the check box which i have added to the subform (from the toolbox) is linked to all of the records. That is to say that when I check one box it checks all of the all boxes as well. :eek:
Is there any SQL language which i should be applying here?
I have a form with a series of check boxes (see image below). The check box is always in the top left had corner and is very small. Does any one know if it is possible to:
a. Have the check box in the centre b. Enlarge the check box, so the tick itself appears larger
