I have got an complete Access database with an "Autorun" from a company.
I need to change a report definition in this database.
Wher can I find such a utility that let me open the database in the Database-window, so that I can edit reports and queries in the database?
It is an Access 2000 database I think.
From the mainform "Home" the "Order Details" Form is launched and changed to Design view. Here I cannot edit the "Order Details" form Property Sheet unless the "Home" form is closed.
Why this restriction is enforced?
from a list of records showing limited information how can i open a record on clicking on it to show all information
View 4 Replies View RelatedWhen I right click the command button to build the event, how can I go to VB editing screen(b.pdf) instead of access interface (a.pdf)
View 2 Replies View RelatedCreate form to search multiple fields in table
Return records that match search
Open the record that you want in Form View for editing
how can i appnend table from one table to other table when i do it says...Cannot Open Database". It May not be a database that your application recognizes , or the file may be corrupt.
View 2 Replies View RelatedHow can you stop people editing the data in the backend database from the linked table in the front end?
The back end is passworded but you can still change data manually from the front end.
Can this be stopped?
I have many forms in my database, three of which completely freeze the database if I edit the slightest thing on them. These forms are all the same, and are unique to any other type of form in my database.
An example of one of the forms is the following:
The form is an "Edit Record" form which allows the user to edit a record directly from a form without going into the table. It is only possible to bring up the edit form by going to the main navigation form that consists of various buttons which a user would press, in this case the user would press the "Edit Record" button. This brings up a unique search form that allows a user to search for a record to edit. The user types their search parameter into the form and once the "search" button is pressed it will bring up the record with all the details in a different form.
Note - The search form is linked to the table where the edit record form is linked to a query.
My problem is this:
I have three buttons on the form; Exit, Cancel & Finish Editing.
All I wanted to do was to ammend the code of the buttons so that "Finish Editing" wouldn't close the form onced pressed and that "Cancel" would simply undo the actions of the user instead of undo and then close the form.
I know exactly how to do the ammendments. But, once completed if you return to the main navigation and click on the "edit" button the search form appears and allows you to type in the search parameters, but once the "Search" button is clicked the search form closes and you are returned to the main navigation where you are unable to click anything in access or even close the programme.
I have an access database which was created in 2003. I opened a blank database and imported the definition and data in access 2010 and made the file an accde file. Now this file has a lock symbol next to the access symbol. I am also unable to edit the main form.
View 7 Replies View RelatedIn my form I have a subform, which displays A, B, C. Then information C is displayed in textbox. User should have a possibility to modify this data in order to modify data in database.
I am able to display information C in text box based on this subform. However it is uneditable, although property of enabled is yes and locked is no.
It seems to me, that it is impossible to edit data because it is taken not directly from database but from sub form, so I make special query which takes data directly from database however I lose an event which is based on selecting proper record from subform (there is only onEnter and onExit events)
i have a database that runs updates from within itself.what i need is, this database to then open a another database run a update query, then close it.
View 4 Replies View RelatedIm trying to work on an db in Access 2007 that was migrated from Access 2003 (in fact its been migrated several times starting from Access 97). It executes and runs with no problems in both versions.
The problem is when trying to open some queries (not all) - Access is unable to open the query in design mode and gives me this error :
" is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long.
However, as I cant open it - I cant check it. Im pretty sure none of the fields have invalid characters (they do have spaces) and Im not sure how long is too long....
What is the best place to have opendatabase statement ? Currently I have opendatabase in all of my forms. I dont have any modules in my application. I am new to access programming. Is module really necessary in an application?
If I can put the opendatabase statement in one place, it will be easier for me to change the database name and path, if I have to..I dont know how to do it.
Can anyone help..I hope this one should easy for many of you people.
Thanks very much.
Hi,
I've run across a couple issues with our database. The most immediate issue is that I have been unable to open the database on any networked (or non-networked) computer. Me and a assistant typically enter data into this database from two seperate computers. She works on a wireless networked computer with the file on my computers hard drive. I work directly with the file. My computer is wired to the router. (in case that information helps)
We keep getting errors about "cannot access remote computer" and such, they seem to occur when she's entering data and I have the database open, then close Access. It will often give her the error and not allow her to save the record.
But just today she entered something, I closed my database window, then reopened it and I could not get in. All network computers rebooted, and still cannot get into the file. I can enter the password and then it goes to just a blank area (like when your first open access with no database). Older backup versions of the database still work, so it doesn't seem like an Access error. I also noticed that the little "LockFile"s are not being created (I ever faked one just to try it out and it deleted it after i entered the database password)
I can't repair, or convert or anything, it just asks for the password, I give it...and then nothing.
I'm very lost. Thanks for any help.
I have one database and I want the ability to click on a button and open up another database. Can I do that?
View 1 Replies View RelatedI can't open my database...
It was open yesterday and after a power failure computer turned off...
2day I can't open it...
Messege box says something like ---database was open--- not properly closed--- etc. etc. and can't perform auto repair...
I tried to import the objects in other database but can't do that as well...
Is there any way to repair the database???
Thanx and regards,,
MPB
I have problem once each day when I open Access for the first time. I get an error message "Microsoft Access has encountered a problem and needs to close. We are sorry for the inconvenience.". It asks for a file name and insists on compacting (I think) and saving the database. I go through this several times saving it under a diferent name each time until I get the warning "Security warning Some active content has been disabled. Click for details." with a button to disable it.
View 13 Replies View RelatedHello. I haven't seen this before with Access; I've searched the forum and haven't found anything yet...
I have an Access database that was being used by about 9 different people. Everything was going along okay, but one day it became read-only for no reason. Once everyone got out of the DB it said it needed repairing. So with only one person in I ran the repair, but the horror-inducing message "The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time." appears and when I click "OK" on the message nothing happens whatsoever.
Luckily backups existed, but some data was lost. Is there anyway to run a repair on the database that won't open? Or is it a lost cause?
Thank you! :D
We've got a client that runs two access 97 based databases on their network. up until recently both databases worked
fine on all workstations (all XP Pro).
About 3 weeks ago they called me to report that one of the databases would not load on 3 workstations. It opened
fine on all the others. I checked out the permissions on the database (which is stored centrally on the server) and
everyone had full control.
Within the last week they have added two new xp pro workstations to the domain - neither of which can access the
database in question. they can access the other database no problem - as can all the other workstations.
The occurs as follows:
1. Double click on the icon for the database
2. access 97 loads but does not load the database's interface - instead it opens an empty version of access (with
file menu etc at the top)
3. no specific error messages at all.
4. close access and the standard xp program crash message appears (see screenshots below)
As mentioned above, other workstations can open the database fine.
the only thing that has changed on the network is the installation of some server and workstation based production
software - we have not yet consulted with the company that installed this - we felt that if it was this software
causing the problem then all workstations would be suffering. we wil have to consult with them once we've exhausted
all the possibilities.
Thanks in advance for any advice
http://www.techresource.co.uk/error1.jpg
http://www.techresource.co.uk/error2.jpg
Hello all,
Please help with this:
On opening my database, I have a switchboard that opens up.
How do also run a report automatically just after the switchboard screen opens. To make the switchboard open when I click on my database, I went to tools..> startup. But I don't know how to run a report automatically after that.
Thanks for your help!
I am getting the following Error:
"This database is in an unexpected state; Microsoft access cannot open it.
"This database has been converted from a prior version of Microsoft access by using the DAO CompactDatabase method instead of the Convert Database command on the tools menu. This has left the database in a partially converted state.
"If you have a copy of the database in its original format, use the convert database command on the tools menu to convert it. If the original database is no longer available, create a new database and import your tables and queries to preserve your data. Your other database objects can't be recovered."
The database is on the server. Nothing was changed. Someone in our IT department says they simply opened it and then closed it. I think that they had their access program set to compact and repair on close.
I have tried to import the tables but am gettting the same errors.
I have the original database but it is an old backup that is missing data.
Can someone HELP
I have copied a work database onto my flash drive and then onto my laptop to do some work in it.
Now I can not open the database because it has the error message.
You do not have the necessary permissions to use the database etc...
I have copied the Application file, the Data file and the Workgroup information file and the only one I can open is Workgroup information file. I have tried holding the shift key down as well.
Any suggestions as I have heaps of work to do and I have tomorrow away from work to do it.
Hi,
I created the database, which shared by multi-user. But, my user have a problem to open it. When user1 open the database, user2 cannot open it, I did not remember the error message, it is said that Admin (computer name) prevent you to open the database. But, if the user1 switch another application program (the database file is still opened), user2 can open the database, then both users can access the same database file.
Why do we have this problem? How can I fix it?
I have a user who is having trouble opening a database he created. Here is his description.
I am having an issue with Access that has occurred today and once several weeks ago.
First, I build a complex database for Safeway report. It functions correctly, I can access it from excel.
Problem, I go to update or modify the databases, Access gives me the macro message which I override.
The access database window will not open, no error appears, just a blank access screen with tool bars above.
I have tempted to do a compact and repair of the database which did not help.
Microsoft Online help says the issue can be cause by old Anti Virus Software.
The database will permit excel to pull data from it.
Does anybody have an answer.
Is it possible to open a database from a form in a different database? Not necessary to do so; it would just be handy to do from the form I already have up and looking at rather than having to go open another instance of access and go to that database.
View 8 Replies View RelatedI have two databases, one is much larger than the other, but both have the same start up code. The larger database opens quickly, but the smaller database takes forever. I tried compacting and repairing the front end and the back end of the database, but that did not help. Any ideas on how I can speed this up?
View 4 Replies View Related