I'm have an Excel workbook (2013) with two dozen sheets that I'd like to import to Access. The code below is failing when it reaches the "Do.Cmd ..." and it's showing a type mismatch error.
Code:
Sub ImportAllSheets()
Dim wkb As Excel.Workbook
Dim sht As Excel.WorkSheet
Dim xl As Excel.Application
[code]...
I've been trying to load data from multiple excel worksheets in multiple workbooks into one table in Access. The first one loads fine, but after that I get errors and can't load anything else. All of the sheets are in the same format, so that shouldn't be the problem. Every solution I've tried has been a bust. All I want is to take all of my data and put it into one big database. Any suggestions?
View 2 Replies View RelatedI'm importing data from Excel to Access using Access VBA which works fine that sheet name is first sheet in workbook. However, if multiple sheets exists in the workbook and that particular sheet can be 2 sheet, 3 sheet or any sheet. In that case how to search particular sheet name and import in access. Below is the code I have used for importing the data.
Code:
objAccess.DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel9, _
sTmpTableName, sInput_Dir & "" & sInputFileName, True, sFile1Wks & "!"
I would like to know which way is the best way to import excel data from multiple sheets in to multiple tables in access.
For example data from Sheet1 -> Table1, Sheet2->Table2, Sheet3->Table3 etc...
I have tried using this:
Cmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel5, "Table1", "C:Importedfile.xlsx", True, "Sheet1!"
Ironically, data from Sheet2 and Sheet3 seem to be properly imported in to table2 and table3, but some of the data from Sheet1 seems to be missing in Table1 after import.
Any other ways to import the data?
I have an Excel workbook with multiple sheets, all the sheets have the same headers and are formatted the same.
Problem 1 is I need some sort of loop so that all sheets will be imported, the names will vary so I can't use specific names to import.
Problem 2 is that I need to create a new TempTable based on the format of these sheets and have them all import to that one table.
I need to do some cleaning up and updating of the data before I run append queries to have it moved to a couple of permanent tables.
I know I've written the VBA to have a new table created on import and later deleted after all my queries run.
I need to import 5 sheets from an Excel Workbook into one table. At the moment I have code which goes through each sheet and imports them. Using the Import wizard only enables you to import one sheet.
View 4 Replies View Relatedsome code I've come up to in order to import multiple excel files each of them with a different number of worksheets into an access table. The procedure is called from an Access database. The problem I have with the code is that when it encounters a workbook with only one worksheets (e.g. Sheet 1) it gives the error that "Sheet 2$" is not a valid name. When geting to a workbook with 2 sheets it says that "Sheet 3$" is not a valid name and so on and so forth. Is there a way to "check" the number of sheets in the workbooks and when it has only one sheet to transfer it and go to the next file?
Below is the code:
Code:
Sub ImportExcelFiles()
Dim strFile As String 'Filename's
Dim strFileList() As String ' File Array
Dim intFile As Integer 'Number of files
Dim filename As String
Dim path As String
DoCmd.SetWarnings False
path = "D:Tranzactii"
[Code]...
I have two reports that I import into Excel.They both show the locations in the warehouse where our product is supposed to be located. Over years of lack of maintenance they no longer match.What I would like to do is link these two sheets in Access so that the information can be updated as I progress and correct the information.Both have a common row or field called Locations. The problem is that some of the locations doesn't exist in both of the sheets. One of the sheets also has duplicated records for the same location.
I assume that I need some type of query to accomplish this; I have copied and pasted some samples of the information in the spreadsheets as well as the results that I am looking for.
I am new to the 2010 version and I am working on downloading contact sheets from excel into access. The download is complete and I see all the sheets and can filter, but my contacts page is still empty. How do I get the contacts from the different sheets into my contact list?
View 1 Replies View RelatedI'm having trouble appending an excel sheet into my access table.
I have 8 columns in my excel sheet:
1- full_name (short text)
2- alias (short text)
3- email_address (short text)
4- user_ID (short text)
5- Location (which is annotated using numbers 1,2,3,4 etc.) (number)
6- active (yes/no)
7- TRI (yes/no)
8- Another user ID (Short text form)
I am trying to append this data to an existing table in excel with the EXACT same column names.
I can append each column from my excel sheet separately and they will appear on the access table, but once I try to append all of the columns at the same time, so the records are not placed in different rows, I get a message saying "Script out of Range"
I cannot seem to figure it out since they can be uploaded individually.
Just to clarify, the excel columns are formatted to the access columns.
I've been trying to load data from multiple excel worksheets in multiple workbooks into one table in Access. The first one loads fine, but after that I get errors and can't load anything else. All of the sheets are in the same format, so that shouldn't be the problem. Every solution I've tried has been a bust. All I want is to take all of my data and put it into one big database. Any suggestions?
View 8 Replies View RelatedI have a number of Excel spreadsheets (data sources) hosted on Sharepoint that I need to link to one single Access database.
At first. I cannot link the spreadsheets directly to Access because Access cannot read the spreadsheets on SharePoint to make the links.
Secondly, I can export the spreadsheets from SharePoint to a local folder on my PC and keep them 'refreshed'. The problem with this is that I cannot link Access to the local refreshed spreadsheets because of the (auto) extention .iqy. Access does not know the extention .iqy and hence the two cannot be linked at all.
Thus: How do I link an Excel spreadsheet hosted on SharePoint to MS Access.
My goal in Excel was to combine them all into a single Pivot Table which I did. The issue is everytime I add a sheet I need to redo the Pivot Table, which would be a hassle as I will continually be adding sheets. I'm hoping that there is an easier way this could be done using Access. The individual sheets are emailed to me and then I put them into one Excel file, is there a way to take that Excel file with all the sheets and import it to Access and be able to sort the data as I would with a Pivot Table in Excel?
View 4 Replies View RelatedI have an access query with around 10 columns. One of the columns is city. There are total of 5 unique cities. I need a macro for the button in the access report that will export the data from the access query to the ONE excel workbook in such a way that each city filtered data from access is exported to city name worksheet. So Excel file would have in total of 5 worksheets with the relevant city data.
View 2 Replies View RelatedI am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Excel workbooks would take names from the "Div" field and the tab names would come from the "Tab" field in the Access table. First need to find workbook name (Div - Field) then the look for each sheet name (Tab - Field) to create 1st Excel workbook with all the sheets (Tab) and repeat the process. I think you need to approach of read the Access table one record at a time keying on the "Div" and "Tab" fields in creating each Excel workbook with the associated multiple tabs (sheets) that are written to a common folder.
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine.
Option Compare Database
Option Explicit
Private Sub Command1_Click()
Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean
Dim lngCount As Long
Dim objExcel As Object, objWorkbook As Object
Dim colWorksheets As Collection
[code]....
Ok..
I firstly just need to know if this is possible.. and if so.. if anyone has any example programs on how this can be done.
I have to create a large number of excel sheets with data from tables.
I need to have formatting (Image at the top, certain lines have to be highlighted.. etc).
Can Access export into excel with formatting? Or can I do it through VBA?
I need to have a lot of workbooks, most of them need multiple sheets.
I've never really had to work with access and excel in this way. Usually I have excel read an Access database, or have Access link/import an excel sheet.
I've never had to generate many sheets like this before.
Anyways, thanks for the help.
I have a program I'm updating that I need to be able to import excel sheets from a lot of different sources and add them to a table in a db which sorts the normalization.my problem is the sheets come from so many sources and have different formats and column names/Locations.does anybody know a way where I could setup say a table specification and maybe run some automation with excel to move the data into the correct fields in access.or have any suggestions.thanksmickp.s. is there a way around the 63k rows limit for importing excel?
View 1 Replies View RelatedI plan to create a tab in access, which has text box and two buttons on it.
when I click the 1st button "Get Me Next" it should get the record from an excel sheet. and when i click the 2nd button "Case Closed". this records should get save in an other excel file.
I have a report generated per insurance company selected. There are around 10 insurance companies.
Is there a way to run the report and export it directly to Excel (I don't need the report in Access) for all companies where each company will be in one spreadsheet? So, 10 companies, there will be 10 sheets in the Excel file.
Is it possible?
I Cannot import excel data to an access table .The type is the same.The colums are the same number.No duplicate values exist in the colum that is primary key.
WHYYYYYY?
In Access i can create different contracts with different running time.
I have contracts with a running time of 4 years, 6years, 8 years, 10 years and 12 years.
I have for each contract a different Excel file.
The users can choose via an Inputbox, which contract he wants to Export in Excel. In the Inputbox he enters the SuWID.
Now i want that the the Excel file with the Special running time get opened.
4 years ----> ("C:UsersGRIMBENDesktop4years.xlsm")
6 years ----> ("C:UsersGRIMBENDesktop6years.xlsm")
and so on.
Code:
Dim xlApp As Object 'Excel.Application
Dim xlBook As Object 'Excel.Workbook
Dim xlSheet As Object 'Excel.Worksheet
Dim rst As DAO.Recordset, SuWID As Long, tmpStr As String
[Code] ....
:confused: Hi all - hope someone can help I dont know where to start.
I've got a cmd button that imports data from a excel sheet - that actual code is working fine, however when it runs it causes Access to freeze.
The data in imported correctly - so it must complete the process but Access locks up and has to be ended via task manager.
Any one got any clues why this is happening and how I can stop it?
This is an Access 97 database running mainly on NT and 2000
Private Sub LoadActualsDataButton_Click() On Error GoTo Err_LoadActualsDataButton_Click
' This procedure performs a two file match between the Actuals table (the Master file) and ' The Actuals spreadsheet file (the Transaction file).
'
' Keys : Study Code|Work Package|Period
'
' If the Master key < Transaction key then
' Read the next Master record.
' If the Transaction key > Master key then
' Add the transaction record to the Master file
' Read the next Transaction record.
' If the Master key = Transaction key then
' Update the value on the Master record with the value on the Transaction record
' Read the next Master Record
' Read the next Transaction record.
'
' End of File processing
' At End of File on the Master file, set the Master key to "ZZZZZZ"
' At End of File on the Transaction file, set the Transaction key to "ZZZZZZ"
' Continue processing until both keys are equal to "ZZZZZZ"
Dim MyDB As Database, MySQL As String, MySet As Recordset Dim appExcel As Excel.application Dim MyFiles As String Dim MasterKey As String, TransactionKey As String
Set MyDB = CurrentDb()
Set appExcel = CreateObject("Excel.Application")
' Set up the transaction file (Actual Data Spreadsheet)
MyFiles = appExcel.GetOpenFilename("Excel Files(*.xls),*.xls", , "Open Actuals Spreadsheet") If MyFiles = "False" Then Exit Sub
appExcel.Workbooks.Open FileName:=MyFiles, ReadOnly:=True appExcel.Visible = False
' Check that this is a genuine Actual spreadsheet On Error Resume Next Let Err.Number = 0 appExcel.Sheets("Sheet1").Range("B1").Select
If Err.Number = 9 Then
MsgBox "This is not a valid Actuals Spreadsheet."
appExcel.Quit
Exit Sub
End If
If appExcel.ActiveCell <> " Extracted Actuals Data" Then
MsgBox "This is not a valid Actuals Spreadsheet."
appExcel.Quit
Exit Sub
Else
appExcel.ActiveCell.OffSet(1, 0).Range("A1").Select
TransactionKey = appExcel.ActiveCell.OffSet & appExcel.ActiveCell.OffSet(0, 1) & appExcel.ActiveCell.OffSet(0, 2) End If appExcel.Visible = True
' Set up the Master File (Actual Table)
MySQL = "SELECT Actuals.[Study Code], Actuals.[TBCS Code], Actuals.[Year/Month], Actuals.Actual "
MySQL = MySQL + "From Actuals "
MySQL = MySQL + "ORDER BY Actuals.[Study Code], Actuals.[TBCS Code], Actuals.[Year/Month]; "
Set MySet = MyDB.OpenRecordset(MySQL)
If MySet.EOF Then
MasterKey = "ZZZZZZ"
Else
MasterKey = MySet![Study Code] & MySet![TBCS Code] & MySet![Year/Month] End If
Do Until TransactionKey = "ZZZZZZ"
If MasterKey < TransactionKey Then
' Read the next master record
MySet.MoveNext
MasterKey = MySet![Study Code] & MySet![TBCS Code] & MySet![Year/Month]
GoTo Next_Loop
End If
If MasterKey > TransactionKey Then
' Add a new record from the Transaction to the Master
MySet.AddNew
MySet![Study Code] = appExcel.ActiveCell
MySet![TBCS Code] = appExcel.ActiveCell.OffSet(0, 1)
MySet![Year/Month] = appExcel.ActiveCell.OffSet(0, 2)
MySet!Actual = appExcel.ActiveCell.OffSet(0, 4)
MySet.Update
' MySet.Requery
appExcel.ActiveCell.OffSet(1, 0).Range("A1").Select
TransactionKey = appExcel.ActiveCell.OffSet & appExcel.ActiveCell.OffSet(0, 1) & appExcel.ActiveCell.OffSet(0, 2)
GoTo Next_Loop
End If
' Keys are equal so update the Master with the Transaction value
MySet.Edit
MySet!Actual = appExcel.ActiveCell.OffSet(0, 4)
MySet.Update
' GoTo Next_Loop
appExcel.ActiveCell.OffSet(1, 0).Range("A1").Select
TransactionKey = appExcel.ActiveCell.OffSet & appExcel.ActiveCell.OffSet(0, 1) & appExcel.ActiveCell.OffSet(0, 2)
MySet.MoveNext
MasterKey = MySet![Study Code] & MySet![TBCS Code] & MySet![Year/Month]
Next_Loop:
Loop
Exit_LoadActualsDataButton_Click:
Exit Sub
Err_LoadActualsDataButton_Click:
MsgBox "An has occured." & vbCrLf & vbCrLf & _
"Error number: " & Err.Number & vbCrLf & vbCrLf & _
"Description: " & Err.Description
Resume Exit_LoadActualsDataButton_Click
' = Mid(ActiveCell, 1, (Len(ActiveCell) - 1)))
End Sub
Private Sub MainMenuButton_Click()
On Error GoTo Err_MainMenuButton_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Main_Menu"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_MainMenuButton_Click:
Exit Sub
Err_MainMenuButton_Click:
MsgBox Err.Description
Resume Exit_MainMenuButton_Click
End Sub
Private Sub MaintainContactTableButton_Click()
On Error GoTo Err_MaintainContactTableButton_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmBDTSContactsMaintenance"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_MaintainContactTableButton_Click:
Exit Sub
Err_MaintainContactTableButton_Click:
MsgBox Err.Description
Resume Exit_MaintainContactTableButton_Click
End Sub
Private Sub MaintainersNBTUsersButton_Click() On Error GoTo Err_MaintainersNBTUsersButton_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmBDTSMaintainNBTUsers"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_MaintainersNBTUsersButton_Click:
Exit Sub
Err_MaintainersNBTUsersButton_Click:
MsgBox Err.Description
Resume Exit_MaintainersNBTUsersButton_Click
End Sub
Hello All
is there a way (i guess using VBA) to import an excel spreadsheet into an access table without having to go through the wizards, if you know all the field names and other variables ??
Yours in anticipation
DJS
Hello All,
I thought i would ask this question an how to import data from excel into access.
I am using sage to invoice clients and i can output this in to excel format then i would like the best and simplest way to pull the data though into access.
The data file has column headings at the first row ie A1 though to J1 and after this is the data, i have a table setup with the relivent table names, I had thought how easy this would be, but as always this was not the case.
The outputed excel sheet will vary in location so i think i need a diolog box to select the file and then some how link it to extract the data, is this right and if so how can it be achived.
Any thoughts
Alastair
UPDATE
**************************************Resolved Thanks to Pat Hartman *************************
Hi All,
I'm having a Excel Sheet With first column which has numeric data for first 70 or 80 records then comes some string data, here i'm using this statement to import data from excel to MS Access DataBase, but its not retriving the records which were in string data type, is there any other way to do this...?
SELECT [Item #], [Description], [Pack Size], [Price] FROM
[Database=C:Test.xls;Excel 8.0;HDR=Yes;IMEX=2].[Sheet1$] Where
[Item #] Is Not Null
thank's in Advance.
- Prakash.C
I want to import data from access to excel my excel file has columns say
a b c d e f g h i j k
my access table has columns
b d e f g i k
now when i run transferspreadsheet, since some columns are not there in the access table, it gives a error. how can i import this data?