Import Excel Worksheet In Access Table [with Lookups]
May 31, 2007
Hi there,
I'm pretty new to Access so I hope this question is not to simple/stupid ;)
Ok, I have an Excel Worksheet that I want to import into an Access Table. The column headers are identical! The only problem is:
- the Access table looks up a couple of the columns from other Access tables. When I try to import the Excel data, Access does (properly) report an error.
- Error: the records from the Excel file were added to the Access table but not all values were imported (no values were imported into the lookup columns...)
Any idea how I should procede so that I can import my data into Access?
where "CustomerFormatted" is the sheet I am trying to import in to the "Customer" table.
The error I get is Run Time Error 3011, The MS Access engine could not find the object "CustomerFormatted" make sure its name is spelled correctly ....
Is there any other way I can import an excel sheet in to an access table?
I am new to MS Access and have been trying to use VBA to import a specific worksheet called "Access" in an Excel file (from about 400 users) into a single table. I want the code to search through one folder and import the "Access" worksheet in each Excel workbook within that folder. Each user has the same worksheet name. Here's my problem. I got this VBA code from: AccessMVP where KDSnell gave examples of how to import Excel worksheets into MS Access Tables.
Sub ImportExcel() Dim strPathFile As String, strFile As String, strPath As String Dim blnHasFieldNames As Boolean Dim intWorksheets As Integer ' Replace 3 with the number of worksheets to be imported ' from each EXCEL file
[Code] ....
When I execute the code. Nothing happens. I go to the table and find nothing....or I get Runtime error 3011, where MS Access can not find the object "Access". Also, is it possible to update the table without duplicating records?
I need to pull data from specific worksheets in Excel from Access. I have code to get the data from a worksheet, but the sheets themselves have dynamic names that I will not know until runtime.
There is one worksheet called "Template" that is consistent. I will need data from every sheet after that one, regardless of its name.
So basically I need to find which sheet "Template" is, find all the worksheets after that one and get their names. Then I can use my existing code to loop through each existing sheet (by name) and pull the data I need.
I'm thinking this is somewhat simple--there has to be some command to find all the worksheet names, but I haven't found it yet.
I want to export a query into a specific worksheet in Excel. Have tried DoCmd.TransferSpreadsheet acExport, but it appears you can't specify an existing worksheet or cell range with a query. Some have said tables only. I want to assign this export task to a command button.
The variables are:
Query name = TrainingDataQ Excel workbook path & name = C:UsersmeDesktop2015AccessExportTest.xlsm Desired Excel worksheet = RawData
I think thats all you will need to know. The data in the query varies but would be no more than about 500 rows.
Also for the next time i want to run the export, some code to open that same excel file and delete the data in the RawData worksheet so that i can export new data from Access?
Hello guyz, With the help of 'Import External Data' wizard, my import did not happen. My datatypes and Col. Headers in excel are matching for what I have in access table. Alternatively, I selected to import the data into new table and all of the data got imported. My question, since I already have some data in table I want data to be imported, how can I do about bringing all the data from new table I created during import to the existing table. Please suggest. Thanks in advance.
Im familiar with Ms Access, but have never used VBA or Scripts. I have 37 Excel files with the same data and would like to import into one file. Data will be received on a monthly basis into the same directory and I would like to automatically upload the data into the same file in Access.
I wanted to import data in a access table using a form in access. The form should contain a browse button to browse the file and then a command button to start importing.
I have a lot of Excel files and each of them has 3 sheets that I would like to import in Access 2010. How can I import them without having to do one by one?
I have some data in excel which I am importing it into MS Access 2002. Each excel file (one worksheet per file) is imported into separate tables.
I want to combine all my imported tables into one table. Is that possible, if yes then how and if no then what can be done to get single table after impoting data from various excel files.
I have code written which imports excel data to a access table but after the first import it fails due to duplicates, how can i tell it to ignore duplicates in the table and only copy new records?
code is below.
Code: Function SyncEmployes() Dim lngColumn As Long Dim xlx As Object, xlw As Object, xls As Object, xlc As Object
I want a user to click a button, have the file open dialog open, they select a spreadsheet, and then it imports into a table. The problem is the filename can be different every time. The table name will remain constant.
Here is the OnClick:
Code: Private Sub Command8_Click() On Error GoTo Err_ImportSpreadsheet_Click DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel2Xml, "Table1", "T_Staff.xls", "Yes"
I have an excel table called Parameter with a column called "Test" -- The column contains integer numbers only. So all the numbers in the column are like 5,10,15,20 etc..I have an access macro which imports the entire excel table into a access table called dbo_Parameters
I have created an access macro to run "Saved Import" for 'dbo_Parameters"..After uploading, all the data in the column Test is formatted to mm/ dd/ yyyy. The Field Size is Integer, but the format is view format is converted to a Date..I have to change the properties of the column to "General Number" and get rid of the date format.how to change the import format!
a) The format of the column in Excel - It is number b) The import procedure and saved import. I am unable to change the format of the import during upload. I make sure that the import format column is Integer
I used to import excel data into access successfully, many times but now I have to import excel data into an existing Access table with foreign key fields, which makes me problems.
Its just doesn't work...and Im sure the forien key fields are the prob cause, the other fields are going well ...
I have a simple calculated field (As "Ratio") that is readable in Access 2010 query, but crashes in Excel upon importing/running the query in an .xlsx table.
ERROR MESSAGE in EXCEL: "The query did not run, or the database table could not be opened...check database server..contact your database administrator.."
I am simply taking the cost amounts of each project record (shown as "Record Cost") and dividing it by the "Total Cost" of that project to render "Ratio".
The Total Cost is retrieved from another table.
Testing scenarios: If we exclude Ratio, the whole query import just fine. If we filter the query to one project (i.e. "Project A") the ratio field imports fine.
However, the whole unfiltered query does not with the ratio!
Other testing scenarios:
If we use a constant for the denominator AS "1" in Ratio (i.e. recordcost/1) the whole unfiltered query and ratio field imports fine.
If we use a constant for the numerator AS "1" in Ratio (i.e. 1/totalcost) the whole unfiltered query upon import crashes in Excel.
This is a mock example of the dataset, the actual query has 50K+ records:
Project Service Date Record Cost Total Cost Ratio A Welding 1/1/2012 $100 $120 83% A Plumbing 2/1/2012 $20 $120 17% B Welding 1/1/2012 $50 $75 67% B Plumbing 2/1/2012 $25 $75 33% C Welding 1/1/2012 $40 $61 66% C Plumbing 2/1/2012 $21 $61 34%
I'm trying to make hyperlinks to specific pages of a workbook to excel. If I put the hyperlink of the form as follows then works properly: C: Users Desktop test.xlsx # Sheet2!A1 -> leads me to Sheet2 document "test".The big problem comes when the leaves have spaces in its name, that is, if the sheet is called Sheet 2:
C: Users Desktop test.xlsx # Sheet 2!A1 -> does not work. C: Users Desktop test.xlsx # 'Sheet 2'!A1 -> does not work.
I've lost two shapes in a worksheet, and can't find them because they are formatted with no fill and no borders.
There are a number of other shapes in the sheet which are formatted and so are visible.
How I can find my two runaway shapes? It's important because they have macros assigned, and so a user may find himself clicking on them unexpectedly, with unfortunate consequences.
Dim xlApp As New Excel.Application Dim xlwrkBk As Excel.Workbook Dim xlSheet As Excel.Worksheet Dim strXLS As String strXLS = "c:AccessMyfile.xls" Set xlwrkBk = xlApp.Workbooks.Open(strXLS)
[code]...
The program is stopping at " Set xlSheet = xlwrkBk.Worksheets("singles")"
and I am receiving the following error box:
Runtime error 9
Subscript out of range.
I don't understand this error because I am using the same program code with another Excel file in another module and it works perfectly.
I am having an issue with an Access import. It worked correctly bringing in a sharepoint spreadsheet until a date field was added to the spreadsheet and the structure to the database. Now it drops any additional fields that are added. At first I thought if I added a filler field after the field I needed that it would still drop the last field but it dropped them both. If I insert the field in the middle of the spreadsheet....(where I really want it). It drops the last field of the email address. Which I need to send out notifications. I have tried designing a complete new table and importing it, but it continues to do the same thing.
Not sure if my problem is with the spreadsheet or Access. Somehow it is still looking at the old structure when I import even if I create a new table. Not sure what is happening.
I have an Access db needing populated via a worksheet with unknown # rows and known # of columns. Before pulling this data in I must do a row count to determine how many records will be added to the db. Otherwise, it would be a very simple thing to just copy the contents of the worksheet over.
Known: - Only using DAO. - The access table is already created matching the column count in the worksheet. - The spreadsheet will have an unknown row count. - Some rows in the spreadsheet will have various cells empty. - A completely empty row will mean EOF.
Need: - I need to determine how many rows are in the spreadsheet before copying into db.
Problem that occurs from attempt: - Overflow issue. I seem to be counting every single row on the worksheet, even though only 2 contain data.
Any ideas out there? Pasting below my latest attempt.
Dim strStorage as integer strStorage = CLng(xlsWST.Rows.Count)
I am using Access and Excel 2007. This Db is for a mental health practice to track and store the paper questionnaires that the patients fill out. The data then needs to be exported to Excel so that it can be imported into a proprietary software that analyzes the data and recommends treatment plans. (It does NOT play nice with Access, forget it.) There are many forms and all of them are fine and export to separate worksheets no problems.
Now for the problem child: One form has 493 fields. Obviously I could fit that into two tables, but it seemed cleaner to use a main form and main table with the patient information (ID_Number, Name, Date, etc.), then tabbed subforms and separate tables for each “section” of the questionnaire (School, Work, Home, etc. There are 11 tables/forms in all.) These tables are all related by the ID_Number. The problem is the export. I need all 493 fields to write to one worksheet in order. This would of course involve removing the ID_Number field from all the tables except the main one. A query obviously can’t handle that many fields. VBA I can TransferSpreadsheet but then each table goes to a separate worksheet.
I’m thinking maybe calling some SQL code that will drop the unneeded fields and keep appending the data to the worksheet one table at a time? Of course the rows would somehow need to be defined WHERE ID_Number = ID_Number so that the same patients information is all on one row.
I have an access 2010 database that looks after all the engine data for a fleet of engines. Each engine has a unique serial number and that serial number is displayed in a test box on a form using a search function.
Each engine serial number has a corresponding excel worksheet where the engine data is displayed as a graph.
Is there anyway that I can have a control button on the form that will allow me to display the excel spreadsheet corresponding to the engine serial number displayed in the text box?
I have a function which exports some data to Excel, performs some work, and then attaches the final report to an e-mail. As a result of various temporary columns being added / removed (for formulas to determine scope etc.), the main sheet ends up scrolled to the bottom of the used range. Before I attach it to the e-mail, I want to scroll the sheet back to the top-left corner (A1).
Code:
Public appExcel As Object ' Excel Application object (late-bound) Dim objWorksheet As Object ' Excel Worksheet object (late-bound) objWorksheet.Activate With appExcel With .ActiveWindow .ScrollRow = 1 .ScrollColumn = 1 End With End With
It worked up until this week, when I had to make some changes to the rest of the code to refine the output. Now, when it hits the ".ScrollRow = 1" line, I get RTE 91..how I can get the sheet to scroll to the top-left before I save it? (Such that, when subsequently attached to the e-mail, the recipient will open the workbook at the top-left cell and not sacrolled to the bottom).
I Cannot import excel data to an access table .The type is the same.The colums are the same number.No duplicate values exist in the colum that is primary key.
I want to make a database of diseases (need to learn them for school and would like a serchable database on my smart phone for future reference). Unfortunately spent a lot of time making hundreds of pages of word tables before i realized a database would be better. See attached image or pdf. Is there a way to import the tables to Access?
I need to preserve the hierarchic info in the nested bullet point lists. E.g. under treatment i might have a point called Acute treatment, with sub-levels, Step 1, Step 2, etc. with their own sub-levels. I need to maintain this relational hierarchic info.
