Import External Table, Access Does Not Like Field Name
Sep 27, 2005
Hi,
I would like to link to an external data source (table) from MS Access 2003. I attempt to use the 'Import' feature to do this, and select 'ODBC Connection'. I am trying to connect to an application called 'Action Remedy'. I make the connection fine, but when Access attempts to import the table, it does not like one of the Action Remedy field names, and the Import aborts. The name is something like "Call Status-History.Closed.Time". Obviously, Access does not like this field name. And the chances of getting it changed (on the A/R backend are slim to none). Thus, my question: Is there away around this ?
I am trying to create an ODBC link to a copy of the Northwind data base.I am running Win7 on a 64 bit operating system but am keeping office running as 32 bit for Access, Excel , Visio etc due to the fact that I have a lot of old apps tied to them.
When I attempted initially to create a new system DSN ODBC connection it only allowed me to use SQL drivers. (No plurry good) So after some searching I found out that I could use a file in C:WindowsSysWOW64 called "odbcad32.exe" which has allowed me to view /use the total list of drivers to import data.So I can set up a DNS ODBC named Northwind1 and I can access the database without problems using Excel.However if I try to use the same ODBC link in Access to connect to Northwind1 I get the following error message:"You cannot use ODBC to import from export to, or link an external ?Microsoft Access or ISAM database table to your database".
I have a simple calculated field (As "Ratio") that is readable in Access 2010 query, but crashes in Excel upon importing/running the query in an .xlsx table.
ERROR MESSAGE in EXCEL: "The query did not run, or the database table could not be opened...check database server..contact your database administrator.."
I am simply taking the cost amounts of each project record (shown as "Record Cost") and dividing it by the "Total Cost" of that project to render "Ratio".
The Total Cost is retrieved from another table.
Testing scenarios: If we exclude Ratio, the whole query import just fine. If we filter the query to one project (i.e. "Project A") the ratio field imports fine.
However, the whole unfiltered query does not with the ratio!
Other testing scenarios:
If we use a constant for the denominator AS "1" in Ratio (i.e. recordcost/1) the whole unfiltered query and ratio field imports fine.
If we use a constant for the numerator AS "1" in Ratio (i.e. 1/totalcost) the whole unfiltered query upon import crashes in Excel.
This is a mock example of the dataset, the actual query has 50K+ records:
Project Service Date Record Cost Total Cost Ratio A Welding 1/1/2012 $100 $120 83% A Plumbing 2/1/2012 $20 $120 17% B Welding 1/1/2012 $50 $75 67% B Plumbing 2/1/2012 $25 $75 33% C Welding 1/1/2012 $40 $61 66% C Plumbing 2/1/2012 $21 $61 34%
Hi Im having a real problem. Im trying to import a query into Excel so a fancy graph can be made. In Excel when I go to Data-> Import External Data then connect to my Database. A list of queries and tables appear however the query I want is not in the list but it definately exists in Access why is this?? Really Frustrating
I want to make a database of diseases (need to learn them for school and would like a serchable database on my smart phone for future reference). Unfortunately spent a lot of time making hundreds of pages of word tables before i realized a database would be better. See attached image or pdf. Is there a way to import the tables to Access?
I need to preserve the hierarchic info in the nested bullet point lists. E.g. under treatment i might have a point called Acute treatment, with sub-levels, Step 1, Step 2, etc. with their own sub-levels. I need to maintain this relational hierarchic info.
I've made an access project (ade) and stored the admin with password in the ade file. When I open a new database I can use the import feature to import all tables with definitions and data from the ade file. All other objects are being locked.
How can i disallow tables from my mde to be imported into another access application?
I have an Excel file with a name range "DBIAS" which identifies all database data.
Then I have an Access file with a form to import that database (better, that named range) into an Access table. While importing, I have to filter some records or grouping by some field.
I cannot run correctly a VBA code to get data (filtered and/or grouped) from that name range and save those records to an existing or a brand new table.
I could get those data as DAO.recordset and printed out with "Debug.print" on immediate window, but I cannot complete the final step: writing those records to a table.
I'm new to this. I'm trying to enter data (it's actually Latitude and Longitude co-ordinates) from an existing Excel source into an Access database which has input masks of 00°00'00.00"L;0;0 (Latitude) and 000°00'00.00"L;0;0 (Longitude) in the respective fields. However I cannot get the information to import or display correctly. I did an "export data" of the respective table (hence fields) to Excel to try and get the correct entry format. An example of the Lat exported was 24°49'41.81"N and Long was 067°01'44.02"E (but with a very small ' in front but only visible in the data entry line in Excel, not in the actual spreadsheet table???)
However when I try to enter the data (even using the exact same little degree symbol, apostrophe, and quotation marks) it does not enter the access fields correctly. On closer scrutiny of the exported Excel format I note a small ' at the very beginning of the 24°49'41.81"N or 067°01'44.02"E string. But as I said previously only visible in the data entry line next to the formula button. Not on the spreadsheet cell.
However even when I "Paste Special" "values only" my new co-ordinates into the same entry location as one exported, it will still not import, or display correctly. If I go into the Access database directly there is a form where if I need to enter the new co-ordinates (using lat example above) I only have to enter 24 49 41 81 N (spaces between) and it will show correctly as 24°49'41.81"N
I'm getting desparate as I don't want to have to change all the details manually. Anyone know what my correct format from an Excel spreadsheet should be?
Apologies for lengthy story! Difficult to describe problem with degree symbols etc
i have a database in access 2003 when i open it with access 2003 it shows data in table but when i open same table in access 2007 it shows only header rows , no data
how can i see this data into access 2007 or excel 2007.i want to link these table data with excel 2007 or access 2007 but with above problem i can't do it
My problem concerns importing a date from a txt file. I've been doing this for years with '97 and 2003 with no problem, but with 2007 I am now getting import errors which I can't resolve. The files, either fixed width or delimited, contain date information in the format ddmmyyyy (without any date separators). After importing I receive an import error message, and the relevant field in the table is blank.
In Access '97 or 2003 I can import date information directly into an Access date/time field by using an import specification where I have set the date delimiter to blank (by default this is set to "/" , so I simply delete this to leave the box empty). Using this method a file containing "25122007" (without the inverted commas) will be imported into Access as a date, and can be subsequently manipulated as date without having to resort to any fancy reformatting tricks. Obviously the import will not be sucessful if the date delimiter in the import spec is left as "/", or set to anything else, eg "." or ":".
But now that I've updated to Access 2007 this is just not possible no matter what I do or try. I can only import a date if the txt data has a separator, and that the same separator is set in the import specification.
In some new databases I have done a couple of workarounds, importing it as text into a text field, then using a CDate(Format(CLng([date]),"00/00/0000")) type expression in a subsequent query, but this is a pain having to do it, a really backward step.
But the real pain is older databases ('97 or 2003) which have been converted up to '07; they no longer work, and there is a lot of redesign to be done unless somone can tell me what I'm doing wrong.
Unfortunately I am not able to change the format of the dates in the data I receive, so the solution has to come from my end (ie Access). Surely Access 2007 should be able to recognise 25122007 as a date? All ideas gratefully received.
I've been happily using various versions of Access since 1994 and I've learnt lots along the way, and have always previously been able to sort out problems that I've come across without resorting to a forum, but I'm now really puzzled by a problem that I have come across in Access 2007. So although this is my first post I certainly wouldn't call myself a newbie. Hopefully I have described the problem accurately (it is realy simple in fact), but very happy to provide more information if required.
if I create an Import Specification, how do I add an extra field in the middle of the field list? All I can see to do is re-enter all fields from the new field downward.
Hello guyz, With the help of 'Import External Data' wizard, my import did not happen. My datatypes and Col. Headers in excel are matching for what I have in access table. Alternatively, I selected to import the data into new table and all of the data got imported. My question, since I already have some data in table I want data to be imported, how can I do about bringing all the data from new table I created during import to the existing table. Please suggest. Thanks in advance.
Im familiar with Ms Access, but have never used VBA or Scripts. I have 37 Excel files with the same data and would like to import into one file. Data will be received on a monthly basis into the same directory and I would like to automatically upload the data into the same file in Access.
I'm pretty new to Access so I hope this question is not to simple/stupid ;)
Ok, I have an Excel Worksheet that I want to import into an Access Table. The column headers are identical! The only problem is:
- the Access table looks up a couple of the columns from other Access tables. When I try to import the Excel data, Access does (properly) report an error.
- Error: the records from the Excel file were added to the Access table but not all values were imported (no values were imported into the lookup columns...)
Any idea how I should procede so that I can import my data into Access?
I wanted to import data in a access table using a form in access. The form should contain a browse button to browse the file and then a command button to start importing.
I have a lot of Excel files and each of them has 3 sheets that I would like to import in Access 2010. How can I import them without having to do one by one?
I have some data in excel which I am importing it into MS Access 2002. Each excel file (one worksheet per file) is imported into separate tables.
I want to combine all my imported tables into one table. Is that possible, if yes then how and if no then what can be done to get single table after impoting data from various excel files.
I have generated two queries called "qry_GetWellName_GetAPI" and "qry_GetWellProduction" that extracts all the data I need from a csv to make two tables.
My issue is that I can not gather all the production data into a query formatted properly for a make table query that contains production history by month / api number.
Ideally the data would be placed in a table called tblProductionHistory with the following unique table index --> [api_fk] [data date]. The api_fk would link to the table that was created by extracting well names using qry_GetWellName_GetAPI.
tblProductionHistory field structure I am trying to achieve:
Currently the qry_GetWellProduction shows each well name and the year it had production as a separate record from the month names and the month's production values. I need to consolidate the data so each record can be matched to the unique table index.
Is there a sub query I need to use to manufacture a data date for each month that includes the year and last day of that month for that year? Also would I need a separate sub query to match each month's production to the api number?
I have code written which imports excel data to a access table but after the first import it fails due to duplicates, how can i tell it to ignore duplicates in the table and only copy new records?
code is below.
Code: Function SyncEmployes() Dim lngColumn As Long Dim xlx As Object, xlw As Object, xls As Object, xlc As Object
I want a user to click a button, have the file open dialog open, they select a spreadsheet, and then it imports into a table. The problem is the filename can be different every time. The table name will remain constant.
Here is the OnClick:
Code: Private Sub Command8_Click() On Error GoTo Err_ImportSpreadsheet_Click DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel2Xml, "Table1", "T_Staff.xls", "Yes"
I have an excel table called Parameter with a column called "Test" -- The column contains integer numbers only. So all the numbers in the column are like 5,10,15,20 etc..I have an access macro which imports the entire excel table into a access table called dbo_Parameters
I have created an access macro to run "Saved Import" for 'dbo_Parameters"..After uploading, all the data in the column Test is formatted to mm/ dd/ yyyy. The Field Size is Integer, but the format is view format is converted to a Date..I have to change the properties of the column to "General Number" and get rid of the date format.how to change the import format!
a) The format of the column in Excel - It is number b) The import procedure and saved import. I am unable to change the format of the import during upload. I make sure that the import format column is Integer
