Increment Order Number By 1
Nov 27, 2007A short question deserves a short answer:
DMax
A short question deserves a short answer:
DMax
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
View 8 Replies View RelatedThis is the problem. If I have a field that contains something like this:
GHP-K-0000D
How can I make the number portion (0000) increment by one when a check box is checked?
Thanks in advance
Hi There
Looking to see if there is an easy solution to this problem I have.
I have a table which holds order information, the primary key for this table is orderID which is an autonumber.
The field in question is order number, which has a default value of "JJO"00000, which I have started manually at JJO10001, is there anyway i can get my database to automatically increment this number to save me from keep checking the last order number produced.
Lost count of the number of times I have gave the same order number to numerous customers.
Thanks
Hello ALL,
I want to know how to reset (to start again from 1) my primary key field. As an example i have the "Customers" table with the field "customerID" as PK now i entered many values (20) then i deleted them but i want to start again and the "customerID" value starts with 21 i understand that but i want a fresh DB (i was testing things) and i want to start from 1 can i? how? i even deleted the relation between this table and the other table but no success!
Some help please?
THX in advance
Hello ALL,
I want to know how to reset (to start again from 1) my primary key field. As an example i have the "Customers" table with the field "customerID" as PK now i entered many values (20) then i deleted them but i want to start again and the "customerID" value starts with 21 i understand that but i want a fresh DB (i was testing things) and i want to start from 1 can i? how? i even deleted the relation between this table and the other table but no success!
Some help please?
THX in advance
I'm trying to code for a 'duplicate record' button on a form that, as well as copying the values of all the controls of the previous record to the new record, makes a certain control (which contains a number) increment as appropriate.
There are two controls on the form which contain the start and end values of a numerical sequence (of potentially any length) e.g. the range 48-82 shows 48 in text box boxREGSEQSTART and 82 in the text box boxREGSEQEND OR the single value 99 shows 99 in text box boxREGSEQSTART and text box boxREGSEQEND is empty. In a record, the value of boxREGSEQEND would always be higher than that of boxREGSEQSTART or would be blank.
The appropriate incrementing action would be:
After clicking 'Duplicate Record' button, If there is no value in boxREGSEQEND in the record being copied, then in the new duplicated record the value of boxREGSEQSTART should be 1 greater than the value of boxREGSEQSTART in the record it has been copied from.
i.e. the record being copied is records a single item, a single value, and the next record should show the sequence moved on by one
OR
If there is a value in boxREGSEQEND in the record being copied, then in the new duplicated record the value of boxREGSTART should be 1 greater than the value of boxREGSEQEND in the record it has been copied from.
i.e. the record being copied is recording multiple items, a sequence, but the next record should still show the sequence moved on by one
I can get the duplication to work no problem, and I can get the incrementing to work fine for the first set of conditions, but can't for the life of me get it to increment when there is a range!
The logic (in my head, expressed as best I can in the macro language ) for the whole sequence of actions goes like so:
RunMenuCommandCommand SelectRecordRunMenuCommandCommand CopyRunMenuCommandRecordsGoToNewRunMenuCommandCommand SelectRecordRunMenuCommandCommand Paste
If [boxREGSEQEND]=[IsNull] Then
GoToControlControl Name boxREGSEQSTARTSetValueItem = [boxREGSEQSTART]
Expression = [boxREGSEQSTART]+1Else
GoToControlControl Name boxREGSEQSTARTSetValueItem = [boxREGSEQSTART]
Expression = [boxREGSEQEND]+1GoToControlControl Name boxREGSEQENDSetValueItem = [boxREGSEQEND]
Expression = [boxREGSEQEND]=Null
Which I would assume would tell the program to copy the current record, make a new one and paste the copy, then if there was a range recorded in the original, start the numbering of the new record one number higher than the end of that range and clear the way in the new form in case it also records a range, otherwise just increment the sequence along by one.
I have a daabase that I am importing via excel. I want the entries to be numbered
ex: MT0001
MT0002
etc....
I would like it to promt the user for the last number(or next number in sequence) entered, then fill in the blank records with the next increment number.
The prefix will also change to so eventually the user would enter into the prompt RD0001. then autofill the 140 imported records with RD0002, rd0003... etc....
I can't really make seperate fields because the MT0001 number will become a barcode and putting them seperate causes many issues.
can this be done? Any help would be great I am still a beginner but slowly learning!
Thanks!
I am working on a section of code that when a user clicks a button it looks at a table called TBLVersion and increments the version number. The version number format is 1.0.1 what I need the code to do is increment the last digit by one for example to "1.0.2". I got the flowing code to work in excel but could not figure out how to translate it to access.
=LEN(A1)-SEARCH(".",A1,SEARCH(".",A1)+1)
=RIGHT(A1,B1)
How do I increment record id like given below:
2014/1
2014/2
2014/3
And when year ends
2015/1
2015/2
Like other posters, I need the default value to be the last value plus one. I am using a subform, and the field I need to increment is ITEMNUMBER for items that are ordered for a specific project.
It is acceptable to me to replace ITEMNUMBER with 1 for the first item, I just want it to increment after that.
Clearly the use of DMAX in this situation will not work as ITEMNUM would continue to increment so that any given project might have ITEMNUM values as, for instance, 357-363 when it needs to be 1-7.
BTW - if I could use the maximum value I would set the default value of ITEMNUM on my form as:
(DMax("[ITEMNUM]";"Projects"))+1
I have two tables, Articles and Versions, related 1 to many. In my Versions table I want to set up a field that will start at 0 for the first version record related to an article record, and as version records are added in relation to that same article record I want it to increment by 1, no gaps. It ideally would be editable. It will not likely count above 5.
The result would be
Code:
article1 version0
article1 version1
article1 version2
article2 version0
article2 version1
article2 version2
article2 version3
What's the best way to accomplish this?
create a macro that automatically fills in the next invoice number in sequence",,I'm assuming this macro would look at the value of the previous record and add a one to itI don't want to use a AutoNumber field as I might need
(a) to modify value or
(b) need to skip numbers.
I have a master/child forms. in master form sale_id,collection notes are placed. and in child form all collection details like collectionnumber,date,etc., child form look like datasheet view.
When i select the record from the list depending on the sale_id all the collection records shown in datasheet view form. If no record is there ok. if more than one records are there in collections of sale_id.i need count of records in collection depending on sale_id and also if i select one row in collection, notes to be shown for that record when i clik on shownotes button.
If more than one record in collection automatically it increment. how many collections for the sale_id. collection number would be increment. How and also show notes depending on collection number and sale_id.
Dear All,
I know that there may have been many posts on this and I have searched for a total of about 2 hours in these forums before posting, so please don't shoot me down for asking this.
I simply need to know how I can create a unique, alphanumeric order number. I was going to use Autonumber, but from what I have read on these forums, that is not the way to go, as Autonumber is simply to identify the record.
What I need is an number like so: ST000. It needs to start at ST142 and increase by one each time. Obviously I would like to avoid gaps from records being deleted or not completed etc.....
I really have no clue how to do this, and would appreciate it if anyone can point me to a post that would help, or offer me the solution.
Thanks,
i have a query which looks at 2 fields: "employee number" & "agency number", i would like the query to list the employee numbers in order first (1,2,3...) then the agency numbers in order (100, 101, 102...). ive changed the ascending/ descending order for them both but doesnt help. Its mainly the form that looks at this query i would like to fix so that is shows all employee records in order of employee number first and then underneath all agency numbers in order of their number (some employee numbers & agency numbers are null) hope this makes sense , any help would be great
View 7 Replies View Relatedi am going to use the autonumber as an order number but I want " SC2015 in front of it so i end up with " sc20151 , sc20152 but next year i want it to change the year SC201650 .how to put the sc2015 in my report without any input from the user
View 2 Replies View RelatedSo, I have some complicated calculations I am aliasing in my SQL query. My end goal would be to sort by my final calculation from all the other calculations I have performed but I am running in to some issues. I know I can't sort by referencing the alias itself without saying order by (column number). My calculations are usually pretty small (around .001 and up). Whenever I order by the column number I would like to use (select... from... where...order by 73) I get a "Division by zero" error in access. I figured this was an issue with how small the calculations were, so I multiplied by 1000000, then ordered by that column number. Still division by zero...I went ahead and changed all 0 values to 1, still division by zero. There are no zero values in the column itself, it's either 1 or something in the thousands. I can order by other columns, just not the one I want to use. I don't want to have to re-do my entire calculations in my order by clause.
View 3 Replies View RelatedI am on code want to display records on the form by order_number, but i am unable to do it.
Private Sub Combo63_AfterUpdate()
Dim rs As DAO.Recordset
Dim intcount As Integer
On Error GoTo ErrorHandler
Set rs = CurrentDb.OpenRecordset("SELECT * FROM Master_Log WHERE Order_number = " & Combo63.Value & "", dbOpenSnapshot)
[Code] ....
I am trying to create an auto-sequential order number
Example : AB000112 - AB is standard prefix, ''0001'' is the first invoice number, ''12'' is the year 2012.
so the next order number should read AB000212 and the next AB000312
Out of this, I have to issue several debit notes relating to the same order number when the payments are due from customers over a period of time, this will be
001AB000112
002AB000112
003AB000112
Can such numbers be the primary key?
This query tell me what quantity I am short of to make a part
diffqty: [StockQty]+[OnOrderQty]+[PendingQty]-Sum([OrderQty]*[ProductQty])
This will return a negative quanity iE -200
what I then would do is copy that to a purchase order but remove the negative sign can this can the formula be changed in anyway to give the positive number .
I am looking into re-creating something I have created in Microsoft Excel into Microsoft Access.What I do in the Excel spreadsheet, is when I type in an order number, various fields in the spreadsheet are populated using vlookups and ODBC's.
I wish to re-create this in Access but not sure how. I have a basic form, with various fields such as, order number, part number, description, quantity.What I have in my mind is that I would like to be able to type in an order number, then the rest of the fields would be populated by a query to a SQL Server database.i can see a way to do this using VBA but would rather look for a more direct way if possible.
I'm trying to create a query that generates random numbers for each record, sorts them by that field, then selects the top record. This should randomize the record being selected.
I can use the Rnd([ID]) function which does appear to generate a random number. Problem is that each time I exit the program and come back in, it always selects the same record. When I remove the Top = 1, to show all the records, every row does have a different random number but it does not appear to be sorting by this field.
If I run the query, here is the number I get: 0.98609316349029
Exit the program, restart, and run the query again: 0.98609316349029
If I refresh the query, the second and third time does appear to be random but the first result is always the same. how to generate truly random numbers?
Is it possible to do a criteria like the "Between" to pull data like a work order number?
Ex WO#: WO5551212
I would like to be prompted to enter a Work Order Number when I run a query, then have the query display all of the data for that particular work order number.
I have an acces form to input client orders. Each order has its own order number a different client. On the same form I have a button to generate a report based on the inpuuted data on the same form which works perfectly fine.
Now I need to use same report to save each order in a specific folder on my computer in pdf format. However I would like to have the file generated as follows ordernumber "-" clientname.pdf. This way each order is saved in the same folder without overwriting the previous one.
I've been asked to edit a current report that lists our production in week number order. I need to look at way we can 'flag up' orders that are within a 4 week period from the current date.
For example,
10 Orders in total in our database. 5 of which are due the drawings back within 4 weeks from today (26/02/15). I'm looking for a way for the report to show the 5 orders as priority, either by formatting the orders in bold, a different colour or under their own heading/group.