Incrementing Numeric Field Value
Nov 26, 2006
I have this bit of code in a routine.
CustNum is a Numeric field with a number
I need to increase by one
With the code below It comes always as 1
Set Db = CurrentDb
Set rs = Db.OpenRecordset("Miracle_Cloth_Main", dbOpenDynaset)
On Error Resume Next
rs.AddNew
rs!Name = NewData
rs!Cust_ID = NewData
rs!CustNum = [CustNum] + 1
rs.Update
rs.Move 0, rs.LastModified ' Go to new record
'Me.Bookmark = rs.Bookmark ' Go to new record
'rs.Close
Could someone help with the correct code.
View Replies
ADVERTISEMENT
Jan 9, 2007
Hello there, some help would be nice! Say i have a booking field. If people wanted to book a number of seats, how would i make it so that when the number of seats that was entered on the booking form was entered it would add on to the exsisting number of seats taken?
So say for film A There is 20 seats available and 4 of been booked, then someone wants to book 2 more, how do i make it so now, the number of seats taken shows up as 6 as apposed to 4?
Id like this done without VB if possible?
Thanks!
View 1 Replies
View Related
Oct 31, 2004
Hi,
I am reasonably new to access and i am having a little trouble with what i would expect to be a simple problem to fix.
What i am trying to do is this...
I have a table set up to work with an asp web page. each record in the table has a unique ID which is set to autonumber.
I also have a field which hold the URL of an image used in the asp file. The address remains the same for all of the records except that the file name it points to increments by one each time.
example:
the record ID is 173 and the file address is:
http://www.berkeley.tv/thumbnails/thumb_173.jpg
Basically, if i could automatically take the ID number and enter it after 'thumb_' it would all work fine.
Hope someone can help me out,
Thanks in advance.
View 1 Replies
View Related
Aug 25, 2005
I have a table <Table1> with field <Cust_ID> with datatype <Autonumber, LongInteger,Increment>. It means that as new record is entered each Cust_ID is auto-generated with incrementing number (that is not fraction). Now, I want to create a field that will generate incrementing fractional AutoNumber as I go on adding new record. (e.g. 1st record: Cust_ID = 1.00000001, 2nd record: Cust_ID: 1.00000002, 3rd record Cust_ID: 1.00000003)
Any help is appreciated. Thanx in advance.
Prodigy.
View 3 Replies
View Related
Aug 14, 2006
So I have a table tblPO2006 with a field PO that contains a number.
Currently I have 100 records and the curent number in this field is 10804
What i want to do is when a new record is created the field updates with a +1 increment to the previous records number.
Thus the new record would be 10805 and the next 10806 etc
I dont want to use autonumber... can someone point me in the write direction of code to do this.
thanks
View 14 Replies
View Related
Jan 13, 2015
I am new to Access and to the forum. I made a check printing system
table name = 'burgan'
form name = 'burgan cheque'
Fields = 'PV' and 'cheque' and 'Beneficiary'
I have inserted a button (Command31).The function I would like to add on clicking the button
1. it should chose the highest value in both fields (PV and cheque)
2. Create new record
3. Increment it by 1 (both fields 'PV' and 'cheque')
4. the focus should stand on 'Beneficiary' field.
View 3 Replies
View Related
Apr 16, 2013
My access database is used to process vehicle trips. Each shift, a vehicle is assigned a docket number (paper based), and on this docket the driver fills out each trip he/she makes. In a shift (thus on a docket) there may be 5 - 15 trips. I want to create an incrementing number for each trip in a new field - can be created as they are processed or after the fact by looping through the resultant data - whatever is easier.
So in simple terms, return all trips for each docket number then number each trip.
View 5 Replies
View Related
Aug 28, 2015
This is a errand database where each client can have several errands and some errands are related to each one and other.
Since each client can have several errands and and each errand is related to each one and other, then the client. I thought i need key which can work as a ClientErrandID, so i can tie the errands together. My idee is to use the ClientErrandID as an text auto incrementing field with a string like: (Errand-A-xxxx).
Lest say the range would be from (Errand-A-0000 to Errand-A-9999) And when the string hits "9999" at the end the "A" will switch to a "B" and the number counter would start over from "0000"
How should the table relationship look like?When a user is adding a new errand to a client, how should the function work?
Should all the associated errands be created in the background and granted the same Errand_ID when the main errand is created?Can i create a incrementing text field with vba & queries?
How would the code structure look like?Is there any examples on a incrementing text field with code available?
View 4 Replies
View Related
Nov 16, 2013
I have a numeric field (long integer) in a table. I've set the format to fixed. No matter what I set the decimal places to, auto, 0 or 2, when I enter a value of 0.71, it displays as 1.00
In my form, I've also set the field property to fixed, but it displays the value as 1.
View 2 Replies
View Related
Dec 23, 2006
I would like to make a join between two field in 2 different tables:
1.) Table with number field for Purchase Order number
2.) Table with text field for customers PO ref (where normally above PO number is entered)
When I link the both I get an error/warning message that the "types in the expression don't match"
Can anyone help me to overcome this problem ??
Thanks
View 3 Replies
View Related
Mar 11, 2014
I have a text field having data i-e HO-1, HO,2, ACW-25 and so on. The field name is nBadge_num and is Unique. The data in this field is sorted automatically like 1, 10, 11, 12, 13, 2, 3, 4, 5...because this is the text field.
The number on the form is automatically generated, when the user type HO- for example on field exit event. The last number will generate like HO-5.
Code for automatic number generation is:
Dim dbs As Database, rst As Recordset, Response
Set dbs = CurrentDb
Set rst = dbs.OpenRecordset("SELECT Max(Right([nBadge_Num],Len([nBadge_Num])-" & Len(Me.NBadge_Num) & ")) AS MaxNo " _
[Code]....
My problem is when the number is generated it give HO-5 instead of HO-14, How can I sort the numeric part of the field ?
View 2 Replies
View Related
May 18, 2005
Trying to do the following:
Having built a table of customers, I need to have an automatically generated ID number for each that IS IN ORDER - which rules out Autonumber and it's gapping tendencies. So, I've developed a new CustID field and set it to "Number", and now just need to figure out how to get it to pull the previous entry and add "1" to it. So it would look like this:
CUSTID NAME
1 Bob
2 Fran
3 Phil
4 Tom
5 (ready for next entry)
Any way to use a function I don't know about, or program some type of solution? Thank you
View 1 Replies
View Related
Jul 12, 2006
Guys, When I generate an excel sheet through vb.net code, I get a Numeric Field OVerflow when the values generated contain a date!
my database is ms access...
The problem is that each excel sheet generated has different columns, depending on what columns the user selects to view. for example: if the user chooses name, age and date, the date would appear on the 3rd column, if the user chooses name, nationality, age, family name, date, then the date would appear on the 5th column, etc.....
Does anyone know the way around this??
thanx!
View 1 Replies
View Related
Jun 28, 2005
I have a query that prompts with a parameter box for the field Contributor_ID. Contributor_ID is a numeric field & Key and I use it to allow the user to print a report based on which Contributor_ID value the user enters. This works fine. However, I would like the user to have the option to enter * and then have the report include ALL the contributor IDs. I have done this before on a text field without a problem, however is this not possible on a numeric field as it is not working? I'm trying not to have another version for the ALL option.
If this is not possible, are there any alternatives?
View 2 Replies
View Related
Sep 13, 2005
Hi,
I'm running an Append Query from an Excel <linked> file to a table in access. From what I can tell, the first filed is overflowing with a linked filed numeric of 'Double'. You can't change linked table fields. However when I first link the Excel file, the Append works... :D only when I reboot the PC and start the next day's work, do I get this message... :eek:
1. Should I include in my MACRO an import to a table and then append...? :mad:
2. Is there a trick in the append query I can use to prevent the error...? :rolleyes:
Thanks
MD
View 1 Replies
View Related
Dec 29, 2004
im able to ru n a delete query then im able to run an append query, when i run it a second time it gives me the error numeric field overflow, any ideas guys
Mark
View 6 Replies
View Related
Apr 7, 2013
How to create field in table that just get number?
View 13 Replies
View Related
Dec 28, 2005
Hello everybody...
Does this Error look formiliar???
"Numeric Field Overflow 3349"
The case is:
I have a .txt file wicht I link to the database.
If I run a query based on that .txt file I get the Error.
...BUT sometimes if i close the database and compact it it works..
??????????????
Thank you for your help in advance...
View 10 Replies
View Related
May 14, 2005
I use Access as my grading program at school. Right now, if I want to excuse a student for an assignment, I delete that record.
What I would like to do is put an "X" or some other string into a field that is numeric and Access would ignore that score when computing the average.
A longshot, but I thought I would ask.
Thanks.
View 3 Replies
View Related
Jun 10, 2005
I have been using a transferspreadsheet cmd for a while now in Access 2003, but when I recently split the database so that the table the import is going to is now linked rather than residing in the same mdb file, I get a numeric field overflow error. I manually made all the values in the import 0, converted it to text, but got the same error.
When I imported the table back into the file, rather than having it linked, the transfer worked fine.
Can you not run the transferspreadsheet command on a linked table or am I missing something?
View 3 Replies
View Related
May 5, 2013
how to control the numeric field range..e.g. number 00.01< and > 99.99...I am looking for some simply code under On Change() event...how I can restrict the field should only take input number no character or special characters.
View 5 Replies
View Related
Feb 5, 2015
I have a database I have worked on for the sister company of the place I am employed.I have a field I am trying to make alphanumeric that has been numeric. (PO Number on the main form). I had make it alphanumeric a couple of months ago, but it disabled the Edit Customer Information button on the bottom right of the form to where I cant enter shipping addresses and things like that. It should be able to enter multiple shipping addresses.
I need making the PO Number field button alphanumeric and making sure it doesnt mess-up the Edit Customer Information button. I have attached both versions of my database. The GM at the sister company would also like me to create a Spin button where you can take an old record and keep all of the previous information on it, except it gives it a new Work Order# and you can change the date to something newer.
View 4 Replies
View Related
Jul 7, 2005
When I'm trying to execute a query using agregate functions.
This error message occurs "Numeric Field Overflow".
The table is linked to text file.
Any idea?
View 3 Replies
View Related
Aug 24, 2006
Does anyone know the syntax to count the number of characters in a numeric field?
If not, how about counting the number of characters in a string?
View 5 Replies
View Related
Apr 25, 2007
Hi
I am trying to replace the numeric values of a field with a text in querry using Choose function, something like this aa5:
Choose([a5]-1="one";[a5]-2="two";[a5]-3="three";[a5]-4="four")
But it is not giving me no results :(( I am missing something but I do not what. Maybe I should use some other function?
I hope someone will help me!
View 1 Replies
View Related
Dec 14, 2006
Hi All,
I have a field called PRICE and obviously it is a NUMERIC field as it need to perform calculations such as calculating Total Quantity * Price etc. At the moment the PRICE is inputted manually by the User on a Form and when it has no Price it is simple left blank.
What I wish to include is that on the REPORT when the field is empty it writes the text FOC instead of leaving it empty.
Can you please anyone suggest a way of doing this.
Thanks any help will be much appreciated :o
View 8 Replies
View Related
