One of the tables in my access file is a linked excel file. I however now want to create a form with which I want people can enter information in the table. However when I try to do this, it doesn't work. Whether it's possible to create an input form for an excel linked access table?
View RepliesI'm trying to link a spreadsheet as a table in Access 2002. The link wizard is importing my number columns as numbers, even though I defined them as text. I need for them to be text in Access. How do I force this?
Thanks
I use an Excel interface to retrieve data from an Access file that has approximately 1 million records. I use an MS Query from Excel to run an Access Query to retrieve the data.
I have 16 "Criteria" fields (columns) in Excel that I change with drop-downs. Each criteria column has 2 to 9 values set; a total of 75 values. I pass these criteria fields to Access via a table link in Access.
The criteria of the fields in the query that is run in Access to pull the data based on the table link is updated by using the Values In A List (IN) option.
When I refresh this query in Excel, it pulls the data fine, but may take 10 minutes to run. (I am using MS Office 2003, 1Gig memory). I have limited VBA knowledge. Is there a better/faster way to pull this data?
I am trying to create an access table linked to an excel file.
The excel file has 256,000 kb, 15 columns, 6,400 rows.
When I go to CREATE, DESIGN VIEW in access and try to create the new linked access table i get this message -
"MICROSOFT ACCESS HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE". I click on Ok and then it says "REPAIR MY OPEN DATABASE AND RESTART MS ACCESS".
I click on OK and then save the back up file. The file disappears. I start over again and the same process starts again and again...
I'm trying to use a template to track assets-specifically this template:URL....Is there a way I can link an excel doc to my database that provides all of my data, that is thereby linked to other tables within Access?I want my data to be updated as it is manipulated within the independent excel doc when I open access.
View 6 Replies View RelatedWhat is the strategy for doing this rather than the code (if it's possible)? I can code a fair bit of VBA in excel but I'm not too sure about what I'm doing in Access.
View 1 Replies View RelatedI'm using MS access and Excel 2000. I have an Excel spreadsheet that contained 8 columns, the first column has all cell format as Number, the rest of the column is set as custom date format of 'dd/mm/yyyy'. When I create a linked table in MS Access, the data types does not matched my excel spreadsheet columns, the 'Number' data type is a double and I want a Long Integer in Access, and the custom date format become text datatype but I wanted a DateTime datatype. Is there any work around this? Seems like it is a common problem.
Your prompt response is greatly appreciated!
Thanks in advance!
Martina
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in
(Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table
EstimatesandParts_ID : Autonumber
Estimate_ID : Number
Part_ID : Number
Parts - Table
Part_ID : Autonumber
PartNumber : Text (not a number due to some part#s have letters in them)
PartName : Text
Unit Price : Currency
Description : Text
Estimates - Table
Estimate_ID : Autonumber
InvoiceNumber : Text (again can have letters in it)
EstimateDate : Date/Time
EstimateTime : Date/Time
Employee_ID : Number
Customer_ID : Number
ProblemDescription : Memo
Customers - Table
Customer_ID : Autonumber
FirstName : Text
LastName : Text
CompanyName : Text
Address : Text
City : Text
Province_State : Text
Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName
LastName
CompanyName
Address
City
Province_State
Postal_ZIPCode
SF_Parts - SubForm
Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box
Control Source - Part_ID
Row Source Type - Table/Query
Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box
UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
Me.txtPartName = Me.Part_ID.Column(2)
Me.txtUnitPrice = Me.Part_ID.Column(3)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
F_Estimates - Form
Estimate_ID
InvioceNumber
EstimateDate
EstimateTime
ProblemDescription
(all basic Text Boxes)
Employee_ID
Customer_ID
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers
SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here
I am using Excel and Access 2002. I have linked an excel file in Access. It is my understanding that if I add a new record in Excel it will automatically add it to Access and vise-versa. This is not working for me. I can add to one or the other and it will not display in both excel and access. I can manually add to both and access will display all data from both the database the table in access and the linked excel file. Any Ideas?
Thanks!
Terry
Does anyone know why when i have a link excel spreadsheet in my access database i am not able to edit the data?
I have a copy of the database on my laptop and it works fine, i can edit and add data but the office copy which is on the network it will not let me edit the linked spreadsheet in access. I have an update query that updates a field in the linked excel table but it no longer works. I dont think there is any special permissions on the files. It is sooo frustrating... dont know what to do.
Thanks for letting me vent.
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
I have a Table in my Db that is a link to an Excel spreadsheet.
Of around 200 records just one is giving me a problem, in one field.
The Excel SS itself is the result of links to about 8 other SSs
The problematic field is a part number and is formatted as text, in the linked table and the underlying SSs. But this one bl**dy field which should be '1707' is shown as "#Num!" Which suggests to me Access thinks it is an number.
Other linked cells like "12345" are fine ???
I have tried putting a letter infront and it then works correctly. Remove the letter, back to "#Num!" again!
Can anyone suggest a way of forcing the formatting to text please?
Cheers
I have a report which runs from a linked excel worksheet. Is there any way I can limit the number of rows in the access reports to only show those rows which are populated in the excel worksheet.
Presently, if the excel worksheet has information in say 20 rows, when I come to print the access report it is telling me there are 1067 records and the only way I can print is by selecting pages 1 & 2 of the report to print.
I am writing code to Refresh table links. I only want to refresh the Access table links and ignore the Excel Table links. Is there a way to determine in VBA if the table link is pointing to an Excel file?
View 8 Replies View RelatedDear Sir/Madam,
I am having the problem of importing a database from Excel/Msaccess 2000 to a Msaccess 2000 database from which the data was originally exported. The Database consists of two tables connected in a querry and the two tables has a unique primary key thru which the two tables are linked using a querry. While importing only two tables are listed in the importing wizard and not the querry.
So how to import the data to the two tables connected by a querry using a primary unique key.
help me the procedure.
lrnathan
thanks in advance
Hi,
I'm new to this. I'm trying to enter data (it's actually Latitude and Longitude co-ordinates) from an existing Excel source into an Access database which has input masks of 00°00'00.00"L;0;0 (Latitude) and 000°00'00.00"L;0;0 (Longitude) in the respective fields. However I cannot get the information to import or display correctly. I did an "export data" of the respective table (hence fields) to Excel to try and get the correct entry format. An example of the Lat exported was 24°49'41.81"N and Long was 067°01'44.02"E (but with a very small ' in front but only visible in the data entry line in Excel, not in the actual spreadsheet table???)
However when I try to enter the data (even using the exact same little degree symbol, apostrophe, and quotation marks) it does not enter the access fields correctly. On closer scrutiny of the exported Excel format I note a small ' at the very beginning of the 24°49'41.81"N or 067°01'44.02"E string. But as I said previously only visible in the data entry line next to the formula button. Not on the spreadsheet cell.
However even when I "Paste Special" "values only" my new co-ordinates into the same entry location as one exported, it will still not import, or display correctly. If I go into the Access database directly there is a form where if I need to enter the new co-ordinates (using lat example above) I only have to enter 24 49 41 81 N (spaces between) and it will show correctly as 24°49'41.81"N
I'm getting desparate as I don't want to have to change all the details manually. Anyone know what my correct format from an Excel spreadsheet should be?
Apologies for lengthy story! Difficult to describe problem with degree symbols etc
I have a file "MatchingData" thats linked to another file "Clist" . What I'm looking for to open "MatchingData" and update from "Clist" on opening. I don't know if I can do this without opening "CList". I have a feeling that I may have to open the "CList" (Hidden), update,then close "CList".
View 2 Replies View RelatedHopefully someone can help me this (and hopefully the solution isn't staring me in the face)
I am trying to export data from a cell in a worksheet to a field in an Access database that I am building. The database has two tables, tblCompanies and tblQuotes. It works through a macro accessed by a command button, which should export the total of a quote into the field Quote_Price in the tblQuotes table, which the users will access through a form. The problem is that if I export the data from Excel, I get an error message saying, "You cannot add or change a record because a related record is required in table 'tblCompanies'. The code looks like this:
Sub NewQuote()
Dim cn As ADODB.Connection, rs As ADODB.Recordset, r As Long
' connect to the Access database
Set cn = New ADODB.Connection
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0; " & _
"Data Source=C:Documents and SettingsDJEdwardsMy DocumentsTest Foldermarketing.mdb;"
' open a recordset
Set rs = New ADODB.Recordset
rs.Open "tblQuotes", cn, adOpenKeyset, adLockOptimistic, adCmdTable
r = 55 ' the start row in the worksheet
Do While Len(Range("I" & r).Formula) > 0
With rs
.AddNew
.Fields("Quote_Price") = Range("I" & r).Value
.Update ' stores the new record
End With
rs.Close
Set rs = Nothing
cn.Close
Set cn = Nothing
End Sub
I can import the cell contents from Access with no problems, but I would like the user to be able to do it from Excel to simplify things.
I'd be grateful for any help!
Cheers
Dave, England
I wanted to import data in a access table using a form in access. The form should contain a browse button to browse the file and then a command button to start importing.
View 1 Replies View RelatedI have an excel file linked to a table in Access. Several fields are date data types in excel but are showing up as text fields in Access.
My real goal is to do a comparison between two tables, but only if the date of the one piece of data is newer than the other. I had planned on comparing the two date fields but even though I have formatted the date fields in my excel file to be "Date", when I look at the design view of my table it is showing up as "Text" and therefore I am unable to do this comparison.
I'm not sure if it's just something that I'm missing but maybe someone else knows an easy fix to this. I know this is probably a simple question, but I did search the forum and didn't find a thread that specifically dealt with this issue.
Thanks in advance for your help.
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
I am rebuilding an application for a client and I have an Access table that I am using as a temporary table. Once the user is done entering information into the temporary table through a form, the user presses an update button that appends the records using an Append Query in Access to an SQL Server Table.
The following error message occurs:
"ODBC -- insert on a linked table 'linked tblname' failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] Explicit value must be specified for identity column in table 'linked tblname' when IDENTITY INSERT is set to ON. (#545)
I am using a form, subform combination to record a bill with many details. The bill summary is posted into a tbl_TransactionsMain table in SQL Server using the ADO AddNew method. The PK for the tbl_TransactionsMain is then entered into the temporary table in Access. When the temporary table records are appended into tbl_TransactionDetail the error message occurs.
What is also interesting is while typing out this post I thought to test the error by manually trying to run the query. The query worked like a charm! :confused: When the orginal error occurred off of the form I tried to run the query manually and it failed. I am guessing that this might have something to do with the ODBC timeout.
I think SQL Server/ODBC connection is not liking how I have a set of records in an Access table with foreign key numbers assigned when I am attempting to append the records. I am new to SQL Server and any ideas are most appreciated! :)
I have two tables, submit and imgdest. Submit is edited by front-end users to load pictures for back-end users who then delete the images when they're done with them. Submit is edited by a form, in the form I've placed a button (Command37) that has code:
Code:
Private Sub Command37_Click()
Call InsertData
MsgBox "Completed", "0", "Completed Backup"
Exit Sub
End Sub
Private Sub InsertData()
[code]....
This code was working for a short while, now anytime it's run I get error 3027 - Cannot update. Database or object is read-only. However, I can open the linked table and manually change information in it with no problems.
I'm looking for help with this error message: "Microsoft Jet database engine can't find the input table..." And the reason it can't find it seems to be that it's looking for an DBF file (which was a format I once had the data in, a long time ago) rather than the mdb file which I have been using forever. Any ideas?
View 1 Replies View RelatedHi
I'm just doing an access form to link to a mysql daabase to update a websites products, using a odbc connection.
When i input a new record and go back to it i see only #Deleted in all fields i have to close the database and open again to see the data correctly.
Is there a way to cure this problem?
Cheers
Neil