I have done a bunch of searching and reading and playing with time formats and can't crack this nut. Is there a way to have a user type in the time without the colon. I can format the field to be "hhnn" but it still requires the colon on entry.
Thanks in Advance,
RichB
We have a new contractual requirement to track all time spent on Military contracts and report it to our Prime Contractor annually.
I am trying to put into Access 2010, basically the same functionality that I have built into Excel time sheets for years; that is simple entry of time in military time using 3 or 4 keystrokes depending on the time of day.
I have a table which records an employee's employee number and job that he or she is working on. I have formatted fields to short for Start Time and Stop Time, and I have a Calculated field also formatted short for elapsed time, however I need to have it simplified to where there is no colon separator on key entry in the form to 700 for 0700 hrs military and 1317 for 1:17 PM.
I will be using this database on several computers, but only a couple that will be used for time entry.
The Excel spreadsheets work well, but I have found them cumbersome trying to dump all the information into a Master spreadsheet from several different individual spreadsheets and I am using Access as our ERP so it will save time if I just add a simple form to track time from there putting it in the hands of the Repairmen and save someone from data entry late.
When TableA is imported from Excel, it has the MAC address as xxxxxxxxxxxx.
When TableB is imported from Excel, it has the MAC address as xx:xx:xx:xx:xx:xx.
In a query the TableA and TableB are joined by the MAC address. Obviously I get no results from TableB because they aren't the same.
How do I remove the colons from TableB.
I know I can do it in Excel, but it is tedious. Thanks
I have a field in a table that I'd like to extra the texts from. The are stored in below format (separated by colons). They don't always the same amount of characters and not all of them have the same amount of texts.
Some may only have Text1:Text2::, while some may have Text1:::Text4.
Text1:Text2:Text3:Text4
Imagine a form where you have to input time value, example 15:30 or 02:00 etc... Is there a simple way to input 1530 or 0200 and access converts the value into proper time? The reason is to eliminate using the ":" each time.
View 2 Replies View RelatedI'm hopeless with input masks. Can anyone help?
I want the user to only decide the first two digits in a 24 hour clock.The minutes should be 00 and no seconds, e.g.
12:00
21:00
etc.
How do I input a value in multiple field boxes one at time using one button at click?
I am not able to code it to recognize an empty field box.
I have a field in my table where I could enter time, I have formatted the field as "Short Time" with date/time data type. I have added a Input Mask for the time with 00:00 so we could only type 1530 quickly and it would taken it as 15:30 time. As there are thousands of entries each day, I have a quick question for the time. If we have time 8:30 AM, we have to input 0830 and it would enter it as 08:30 and its little odd to first enter "0" and then 830, Is it possible we could only enter 830 and it will taken the time as 08:30 and the rest of the things works like the same as it is working right now.
View 3 Replies View RelatedWe store data for clients which can be found online. Our current method of getting the data so we can analyze it is to copy a table found online and pasting it into excel.
What we want to do is to copy that data into an access table. This equates to inputting multiple records at the same time. There are 5 columns and around 20 rows (records) pasted at the same time. I want to do this in Access, through a form which would them store that data in the appropriate table.
I assume there is an ActiveX control out there which can put a spreadsheet in an access form. Then i could maybe write a VBA procedure to input the data into a table.
When I enter character in input box then show run-time error with this code.
Code:
Private Sub cmdDelete_Click()
Dim password As String
If Command49.Visible = False Then
password = CStr("0" & InputBox("Enter Password"))
[Code] .....
I have a barcode input form. When a barcode is scanned, the value of the barcode, along with a date/time stamp using the now() function (hh:mm:ss) is entered into a table in the database as 2 separate columns. I need to make sure that I don't have any 2 barcodes with exactly the same date/time. They must be at least 1 second apart. How can I easily make this happen? I can't control how many times the barcode actually gets scanned.
View 3 Replies View RelatedHello,
I need to create a field in an input form that is simply the concatenation of two other text fields. I have tried all sorts of things, but when I look at the data in the table that field.
I have a field called ID that I want to be created like this:
=Format([UniqueID],"00000") & "-" & [Mosque]
This works well in my output fields, but does not work the same way on the input form. It needs to be based on the currently input values from the current record. Anyone have any ideas?
Thanks in advance,
--Robert
I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?
View 5 Replies View RelatedI have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View Relatedhow to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM
[PunchOut] = 11/23/2013 5:43:30 PM
[ShiftLength] =DateDiff("n", [PunchIn],[PunchOut]) = 572 minutes.
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View Relatedso i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedI have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedHi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
Hi all, I havent' been around in a while (toddler, work, getting my BS degree and new baby coming in a week and a half) so I am hopefully not asking a previously posted question.
I'm suspecting my new work isn't accurately paying for the hours worked. I made a quick simple DB where I input my punch times in short time format. There's the typical In, Out for Lunch, In from Lunch, and Out. I've got it correctly adding the times so that it reports the total hours worked per day, though, in order for it to display correctly, that total is in short time as well.
The problem is, when I group a week together, as soon as the sum of the totals reaches 24 or more, it goes back to 0, as it's on the idea that there's only 24 hours in a day.
Hopefully, it's just a formatting issue or is there a function to convert the times (or just the sum) to number of hours?
Thanks and Happy New Year to all.
-Jim
I am trying to create an Access database where I can let the employees enter their time-in and time-out, at the end of their shift. I already created this function working, but running into another issue. Everyday, employees need to enter a break. Sometimes they take a break and sometimes they don't, if they work shorter hours. Thus, the break is not a default 30min and has to be enterd by the employee.
Below is the code I have to calculate the total hour:
txtCalcTime has the below code in control source:
=Int([CalcTime]/60) & ":" & Int([CalcTime] Mod 60)
Control source for this form "FrmTimes" property, in which Txtcalctime resides:
QryTimes
"QryTimes" query has the code below:
SELECT TimeID, TimeIn, TimeOut, Brake, DateID, DateDiff("n",[TimeIn],[TimeOut]) AS CalcTime
FROM EmpTimes;
This shows the total number of hours worked. But how can I make it to substract the break time entered by the employee in "txtbreak" on FrmTimes