Hi I am creating a stock database and I have come across this problem:
I have a stock table, and I have successfully creted a query to insert a record with values selected in a form:
EG. In the form you can input a part no, comments and the quantity you want to add. I have created the stock system so that each individual item of stock is one record in the stock table.
What I can't seem to do is use the quantity field in the form to dictate how many times the form details is entered into the stock table.??
I need to devise a query to append data for a particular Department_ID from TBL_NEWDATA to TBL_PERSON_ALLOCATIONS where that data does not already exist there. i.e. for Department_ID 'Research', I would want to append 'Person_ID', 'Department_ID' (in this case: 'Research') to TBL_PERSON_ALLOCATIONS for any tuples not already held.
INSERT INTO TBL_PERSON_ALLOCATIONS (Person_ID, Department_ID) SELECT Person_ID, Department_ID FROM TBL_NEWDATA WHERE TBL_NEWDATA.Department_ID='Form...'
[code]...
This Query takes a single argument from a control (Forms!Main!IN_Department), and this is the Department_ID to be updated.Is there any way to do this using a single query or will I have to use sub queries? I'd hoped not to as to keep the database as concise as possible.
I have a query that includes fields from T_employee and fields from T_courses, which is courses taught by each employee per semester and T_ Additional, which is additional hours added to employees for each semester. The query groups by employee and has a calculation of the teachers total hours per course based on teaching hours and factors for marking and preparation and adds the additional hours from T_additional.
Each teacher cannot have more than 44 hours, so there are additional calculations that calculate the consequence of subtracting one course from the total hours. The record that is closest to 44 without going over is optimal. In some cases, subtracting one course is not enough to get the hours below 44 and an additional course will need to be subtracted and perhaps a 3rd an so on.
I would like to evaluate which course is the most optimal to subtract and if it is not enough, then to loop through and subtract the next course until the hours are below 44, but as close to 44 as possible.Would a Do loop be what I need? I need to output the total number of hours that were subtracted and the number of courses.
I tried creating a query based on this one, grouping by employee and under the NetHours in the totals row, the max nethours <44. This works but there are still a few records where the nethours is >44. I would like to use a Where in the Totals row and in the Criteria somehow indicate that I want the largest number that is less than 44.
I am using Access 2010. I have a database that on a form uses a multiselect listbox. That part works just fine. The list box is for selecting additional people to email. Now I have had no luck with returning just the email address that are in a hidden column (the persons actual name is seen and "selected"). The names come from a separate table and is used as a forgien key. On that same table are the indivuals email addresses. What I did was loop through to get all of the ID numbers I am getting from the list box (the ID numbers are stored in the table that the form is based on).
Once I have all of the ID Numbers I thought that maybe there was a way to retrieve all of the email address associated with the ID Numbers. This is what I have so far. I know that AllQuery returns the first email address from the list box. I just have no idea if the query is returning more than one record, or if it is how to then go to the next record. I have tried a few things with little to no success.
Code: Dim ListItem As Variant Dim AllItems As String Dim AllQuery As String For Each ListItem In Me.EmailAdditionEgineers.ItemsSelected AllItems = AllItems & Me.EmailAdditionEgineers.ItemData(ListItem) & " or " Next ListItem AllItems = Left(AllItems, Len(AllItems) - 3) AllQuery = DLookup("EmailAddress", "AdditionalEmailRequestQuery", "[ID] = " & AllItems) & ";"
I am working on setting up a loop that will get information from a query. I can handle the rest of the code once I get the primary piece of information. Which at this point I can not get. I am trying to get to the next record of my query. For some reason I am stuck on just the first record and it is repeated the exact number of times equal to the number of records in the query. Here is what I have so far.
Code: Dim FSO As Object Dim FromPath As String Dim FromPathCheck As String Dim ToPath As String Dim FinalDestination As String
[Code]....
Yes I do know that I am doubled up on the
Code: rs.MoveNext
The reason is because with out this added rs it goes into an infinite loop. Need generating each value in the TRNumber field in the query.
I've set a database which has a table in which there are 2 fields "Account" and "Total Accounts". I want to have the amount of total summation of accounts in "Total Accounts" field of each record, which is the result of summation of "Account" values in all previous records till the current one. In order to do this purpose, I copied the value of "Amount" field of each record into "Total Accounts" field of the same record, at first. Then, I tried to add the amount of "Total Accounts" field of every record with just the amount of "Total Accounts" of previous one to earn the actual total amount of that record. I found that I need a VBA loop to do this query for all records (except first record) and so I code it as below, but it has the Run-time error '424' : Object required and it seems that I am in a mistake in definition of strSQL variable:
Code: Private Sub doDataSegm_Click() Dim dbs As DAO.Database Dim rs As DAO.Recordset Dim strSQL As String Set dbs = CurrentDb() Set rs = dbs.OpenRecordset("Table1", dbOpenTable)
I am trying to export a table in access based on a unique field called Group_Name. Say my table has 100 records. 10 of those records belong to Group1, 10 belong to Group 2, and so on. What I want to do is export those groups individually to an excel file and have that file named somting like Group1_Premium Detail Report.
Here is the Code I have so far. I have a feeling I am close. When I run the code it does not seem to like strrsql2
Dim strsql As String Dim strsql2 As String Dim strfilename As String Dim strpath As String strpath = "C:UsersDesktopHome"
I'm an accountant and I'd like to build my own personal financial database in Access. One thing I like about MS Money is the 'Forecast Cashflow' feature, which is based on a schedule of recurring transactions, amounts, next due date, and frequency. I want to replicate this.
So, I created a dummy database for the sake of learning the code behind this process. I've got 2 tables (but no microphone.
1) tbl_InitialPoint (which is my schedule of recurring transactions, amounts, frequency (in days)) 2) tbl_Register (where I want forecasted transactions to wind up)
I've got 2 saved queries:
1) qry_MaxDate (looks for any transaction @ 'tbl_InitialPoint' and finds the last date of that transaction in 'tbl_Register' SELECT MAX(tbl_Register.PostDate) AS LastDate, tbl_InitialPoint.Description FROM tbl_InitialPoint INNER JOIN tbl_Register ON tbl_InitialPoint.Description = tbl_Register.Description GROUP BY tbl_InitialPoint.Description;
2) qry_InsertTransactions (populates 'tbl_Register') INSERT INTO tbl_Register ( PostDate, Description, Amount ) SELECT qry_MaxDate.LastDate + tbl_InitialPoint.Frequency AS DateSeries, tbl_InitialPoint.Description, tbl_InitialPoint.Amount FROM tbl_InitialPoint INNER JOIN qry_MaxDate ON tbl_InitialPoint.Description = qry_MaxDate.Description WHERE qry_MaxDate.LastDate + tbl_InitialPoint.Frequency <= [Forms]![HomePage]![DateHorizon];
And I've got a form called 'HomePage' that has
1) A textbox where I input a date horizon (this is where I want the eventual 'Forecast Cashflow' to stop 2) A button to start the process
It seems to me that qry_InsertTransactions needs to be run over and over (looped) until the query is empty. And it seems to me that this can only be done via VBA (not sure if I could structure my SQL to avoid VBA in this case, but I need/want to learn the vba to accomplish this).
I'm having trouble getting VBA to run qry_InsertTransactions a single time. I'm pretty sure if I could get the thing to run once I could get it to run through a loop. So, here's what I came up with.
Public Sub InsertTransactionsBttn_Click() Dim db As Database Dim qdfNew As QueryDef Dim qdfInsertTransactions As QueryDef Set db = CurrentDb()
the below code works fine if i run a crosstab on a whole table however if i pass criteria to the crosstab e.g between [forms]![form]![txtstartdate] and [forms]![form]![enddate] it fails and returns null for every field? even though if set docmd.runquery "qryReductionByPhysician_Crosstab" this opens with the relevant data?
Code: Set db = CurrentDb Set qdf = db.QueryDefs("qryReductionByPhysician_Crosstab") indexx = 0
I basically want to Loop through a query (or if not possible trough a table) and show the results in my form. For each record in the table I am doing additional checks when loading the form and showing that result accordingly. I do not want to do these checks in additional queries - I think it is more efficient doing it in the form directly. Here is the code I have:
Dim dbsSR As DAO.Database Dim rstValQry As DAO.Recordset Set dbsSR = CurrentDb Set rstValQry = dbsSR.OpenRecordset("qry_val_tbl_ind_rec-rev_import") With rstValQry While (Not .EOF)
[Code] ....
The Loop seems to work because in debug it is going through it 3 times (the number of records I have in the query), but the result is always the same - it seems the above code is not checking / refreshing based on the individual query records.
I have a form with 10 combo-boxes. Once user selects a value in CB1- CB2 becomes visible and active. I am trying to run a dynamic query- where the selection of the combo-box is used to select a column from my table called "dbo_animals"
To elaborate: CB1 contains the following values
Code : elephant, giraffe, bufffalo, tiger, lion
Once the user selects elephant in CB1, CB2 becomes active and I select tiger next. So the query becomes like. The process can go on and the user can select up to 10 animals
Code : **SELECT elephant, tiger FROM dbo_animals**
Problem: I am able to create the query with string manipulation- Unfortunately due to the way the loop through controls is set up- The query is unable to convert the text into a reference. If I hard code it as
tempquery = "SELECT [Form]![Animal Finder]![CB1] FROM dbo_animals" MsgBox(tempquery)
It looks like
Code : SELECT Elephant from dbo_animals
This is how I want. But, since i am looping through CB controls, I have it set up as
Code : tempquery = "SELECT" & " [Form]![Animal Finder]![CB" & i & "] FROM dbo_animals"
and this shows up as
Code : SELECT [Form]![Animal Finder]![CB1] FROM dbo_animals
Thereby giving me an error saying that the reference is not valid and asking me for a parameter value.
This makes sense, since it is unable to evaluate the text as a reference.
How do I correct the text into a reference? Or How do I build a query with adjusting columns based off selections from a combo-box and loop through the comboboxes in the form while auto-updating the query?
Using Access 2010: I have a query with four fields: ORG_NAME, PERS_NAME_LAST, CountOfORG_NAME, and BdMbrCount. There are a couple hundred companies in the database with 1-7 people associated with each company. I need to number each person so that they have a number, 1-7 in the MemberCount field of my query.
I have my query connected to VBA code.
I have experimented with code that I have found on the forum, just to see if I could get something to work and I am getting “Undefined function ‘BdMbrCount’ in expression. I am trying to pass [ORG_NAME],[PERS_NAME_LAST] to my function and assign the value of BdMbrCount to a new field in my query, BdMbrCount.
Code: Function BdMbrNumber() Dim qdf As DAO.QueryDef Set qdf = CurrentDb.QueryDefs("YourBdMbrsRRecognizedQry") 'Set rst = CurrentDb.OpenRecordset("SELECT [ORG_Name],[PERS_NAME_LAST],[CountofORG_NAME], [BdMbrCount] FROM YourBdMbrsRRecognizedQry") Dim ORG_NAME As String
I am trying to loop through a query results to extract email addresses from a query result.
I have the following code
NameCriteria = Forms![MainMenu]![tbl_Course_Details]![Course_Name].Value DateCriteria = Forms![MainMenu]![tbl_Course_Details]![Course Date].Value Dim db As DAO.Database Dim rs As DAO.Recordset Dim sqlStr As String
[Code] .....
If i run this in access as a query then it returns results but when i run in there then it says no current Record and i cant work out why?
Someone on another post said that sql uses US date format so i tried converting to us date and still no results?
I am a relative newbie to VBA, and not very familiar with loops, but I need to add a loop to my function that exports a query with criteria contained in a bound ComboBox on a form. I've gotten my code to work fine without the loop, but I would like to export one file for each item "Team_ID" contained in the ComboBox without the user having to manually select and re-run the function each time. Here is what my code currently looks like:
Code:
Option Compare Database Option Explicit Public Function CreateQCChartsforReports() As Boolean Dim qdf As DAO.QueryDef Dim strSQLStatic As String Dim BookName As String Dim BookName2 As String Dim intCounter As Integer Dim cboCode As ComboBox
I have a part table summary with various quantities 1-1000 and want to create a new table where part number repeats with quantity of 1 corresponding back to the sum. If part 123456=20 then this would repeat 20 x and each record Qty=1
Start with summary --================ Part Qty 111000 2 222000 3
End result all Qty=1 --================ Part Qty 111000 1 111000 1 222000 1 222000 1 222000 1 --================
I stared with a loop and was able to get an append query to work referring to the quantity value (3) for one record from tbl_temp to tbl_main, but not really sure how to advance through many records.
For n = 1 To [Forms]![MainScreen]![Text7] DoCmd.OpenQuery "qry_Update_Qty" 'DoCmd.GoToRecord , , acNewRec Next n
I am at work, and I have acquired a database that prints labels. They now want the database to be coded so that after certain labels are printed the database will print a blank label. I have the code figured out as a Do While statement in order to print the blank label. The problem I am having is that I am trying to use the Insert Into command to insert the filepath into the table that adds the blank label.
|DoCmd.RunSQL "INSERT INTO Rod_tmakLabels ( Print, [Order] ) SELECT Yes AS Expr1, 'Rods Labels' AS Expr2"|
If I run the above command, it just adds the text "Rods Labels" at the end of the table. Is there anyway with the INSERT INTO command that I can insert the new label between the 2nd and 3rd row and add another row? Or is the command designed only to add a new row to the end? I haven't had any luck searching for this yet.
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
I am using an Access 2010 DB to keep track of a schedule. Essentially, at least one person needs to be signed up to work for every hour of every day in a week.
Tables: Days with 7 records Hours with 24 records Workers with as many people that sign up to work the different hours Schedule signifying the worker, day, and hour which are signed up.
As of now i have a query that relates these results and gives me a line detailing the worker/time information for the slots that are signed up for.What I'm TRYING to do is to create a query that gives me BLANK worker info when there is no one signed up for a particular hour.Currently my Schedule table has the following:
What I'm looking to do is have this table matched up with another table (or query) that provides every combination of day/hour. When an day/hour combination is skipped, the query will be able to "fill in the blank" with a row. Like this:
I work with access web database. In access web aggregate functions are disabled in query design. So I made a query in client and i thought then i can insert this data to another web table. but i don't know how to update this table.
Because the source table of the query is also updated.
I upload the database with a table in it and a query. I want to add the data of this query to another web table....
is it possible to have an insert query to fill some of the parameters by select query from other table and rest of the parameters by passing the value.
ex: insert into table1(a,b,c) values (10,select b fom table2 where.... , 35);
i tried with the above syntax but was unable to succeed.
if this is not possible can anyone help me in solving the problem
I'm trying to write the VBA code to insert data into an audit table. My code is in a function which will have the values to be inserted to it passed to the function.
My function code looks like:
Function InsertAuditRecord(stAction, stTimestamp, stUser) As String
The values "stAction", "stTimestamp" and "stUser" are the values passed by the calling procedure, but when this query is executed, the Enter Parameter Value window pops up, asking for the values for each of these 3 variable.
Can anyone tell me how to code the query so that it will use the values passed to the function?
