Insert A Line Of Data In A Subform

Jul 11, 2007

Hi,
I have a form which records computer faults reported by users. On this form there is a subform for comment tracking eg. Phoned user, Date/Time. On the next line would be; Informed user to do this, Date/Time and so on. I have a button on my form which I would like to use to automatically put in a line of data. It is an aknowlegde fault button. What it hopefully would do is when you click the button it will automatically put in the date/time in the subform, Then the word "acknowledged" in the comment field, then prompt for the user name ( for the username field).
I am not sure on how to start the command. If i were to do it in the same form then I would just put something like;
me.Date.Value = Date()
me.Comment.value = "Acknowledged"
me.Username.value = "[Prompt]"

As you can see I have two problems though;
1. The data has to be entered in a subform
2. My Prompt I dont think will work.

Does anyone have any ideas?

Kind Regards
Keith

View Replies


ADVERTISEMENT

Subform Data Entry Problem Blank Line

Jul 7, 2005

I have a main form where the user chooses a BoxID. There is a subform on this main form that has a relationship between BoxID on the main form and subform. The users are entering data in the subform and when they have entered 10 lines of info I have a message that tells them to start a new box (I could not work out how to do it any other way as I lack VB skills). The user closes the form or clicks add new record to create a new box. If I view the previous record there should only be 10 lines of information in the subform but there are 11 as it takes the blank line as a new record....

View 8 Replies View Related

Insert Data Into A Subform

Jul 29, 2015

I have a form with a sub form, on the main form I want the user to select a machine number and then when they have selected it I want to populate the required data into the sub form.

In the sub form I have a field called "Seal" and another called "Quantity" what I require is to get the results from either a query or table and list all the seals & quantities for that machine.

I have a table called "Machine" which has all the machine numbers and also fields called "Seal1", "Seal1Qty","Seal2, "Seal2Qty" all the way to Seal 10.

I do not know how the best way to get this data into the sub form...

View 5 Replies View Related

How To Insert Subform Data To Specific Table

Oct 1, 2013

I have problem with inserting sub-form data to specific table. i have 2 table and one form.

table A is for DLOOKUP, table B is the table i want my sub-form data to insert in.

my table A have ID,name and class.

my table B have ID and other column.

Table A' ID and Table B' ID is related.

i trying to insert my sub-form to table B instead it insert the data to table A.

View 1 Replies View Related

Forms :: Insert New Data And Show All Records In Subform

Mar 27, 2013

I have a form with a subform. I want to use the main form to insert new data and the subform to show all records that are there. One could say that the after inserting a new record with the fields in the form and save it, it should appear in the subform datasheet view.

Please see attached the sample database..

View 3 Replies View Related

Queries :: Add Textbox Value To Each Line Of Insert

Nov 20, 2014

I'm trying to set up a data import function as follows: The user fills out a form, generating an entry in the Orders table. After pushing a button, line item data will be imported from an excel spreadsheet. I've got most of this working- I have a temp table that gets cleared out and then populated from the excel spreadsheet which is then deleted, all working fine. My hangup is when I try and get the line item data out of the temp table. I need to append the Order unique ID from the textbox on the form to each line item. Here's the select statement part of the insert into:

SELECT Forms!frmOrder!OrderID AS OrderID, ItemsID, NumUsed
FROM tblTempOrder

This gets the line items fine, but puts an Ankh symbol as the OrderID for each line item.

View 2 Replies View Related

How To Insert A Line In Access Database

Jan 4, 2015

I am busy with an database in Access Control. I want to insert a line between 2 certain lines. How can I do that.

View 3 Replies View Related

Modules & VBA :: Insert (Append) First And Last Line In XML File

May 31, 2015

I need to insert(append) first and last line in xml file...

So I have xml file and I need to insert one line to the top and at the of the text... Xml file contains Cyrillic characters and method to recreate xml file is going wrong with characters conversions... The last line a can append easy but the first line is a problem...

View 10 Replies View Related

Reports :: Cannot Insert Line Chart Into Access

Sep 5, 2013

I can not get a line graph inserted into a report by using the Wizard. I have 2 columns of paired data that I want to graph. I dragged the 2 columns to the "Data" control in the wizard and changed summarizing for both columns from "sum" to "none".

When I look at the report in Print Preview, the data points are stacked vertically in the center of the graph and the "Series" box displays what looks like the data. If I add a Date/Time column as the X-axis, I am told that I have to summarize the data, something I don't want to do.

I've made various selections using the wizard and all fail.

View 3 Replies View Related

Forms :: Go To End Of Field And Insert New Line And Date

Jan 2, 2014

I have set up a customer database for our small electronics company and i have built a form called contact history. In the form i show a few details about the customer (name phone number etc) but the bulk of the form is a large text box for a contact log.I would like to have a button on the form that takes me to the contact log field, inserts todays date and allows me to update whats been said to the customer etc. I have it working using setfocus and date functions however it erases any information already in the field. Is there a way to skip to the end of the field and insert a new line, then add the date and allow me to begin typing?I would like the end result to look like the following.

16/02/2013: Introduced Myself and the company, spoke to joe bloggs and agreed to call back on 28/02/2013.
28/02/2013: returned call to Joe Bloggs but was out of office, will call back 01/03/2013.
01/03/2013: Spoke to Joe Bloggs and have arranged for him to visit us on 10/03/2013.

View 8 Replies View Related

Modules & VBA :: Insert Into Function - How To Carry Over To New Line

Oct 24, 2013

I am using "INSERT INTO tablename(a1,a2)" function but i have to many "a" objecjts. How to carry over to a new line without having error?

View 10 Replies View Related

Reports :: Insert Half-line Feed Into Text In A Control

May 5, 2014

Any way to insert a half-line feed into text in a control?

View 2 Replies View Related

Reports :: How To Insert Enough Blank Line In Order To Make Each Report The Same Length

Aug 22, 2013

I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!

View 1 Replies View Related

Subform Line Numbers

Nov 17, 2004

Hi! This is my first time writing in. I have been struggling with Access for the past 2 months... I am stuck with a problem. I have a variation of the Order form in the Northwind Example, with a subform called OrderDetailsExtended. The primary keys for the OrderDetails Extended subform and its corresponding table are the orderNumber (which is the link with the mail Orders form) and Item. Basically, my question is.. each time i want to add a new record, I want the Item number to automatically increment (but i am not using autonumber for this). The item field is currently disabled.

However, each time i enter a new record, the item number automatically becomes 0. And if I close the form and reopen it, the number changes to 1... Here is the VBA code i used...

Private Sub ProductCode_Enter()

Dim vItem As Variant
vItem = Nz(DMax("Item", "orderDetails", "orderNumber = ' " & Me.orderNumber & " ' "))

If Me.Item = 0 Then

If IsNull(vItem) Then

vItem = 1

Else

vItem = vItem + 1

End If

Me.Item = vItem

End If
End Sub

Please help me....

View 3 Replies View Related

Disable One Line In Subform

Dec 10, 2004

i have a form with a subform. the first line of the subform is supposed to mirror some of the data filled in the form. as soon as the appropriate data is filled in the main form, i would like the first line of the subform to reflect this sama data. i also want this first line of the subform to be disabled so that users cannot have different data between the main form and this first line....
is this possible? how would i disable just this first line? is there any function to disable it?

Thanks

View 3 Replies View Related

Automatically Populate First Line Of Subform

Dec 10, 2004

i have a form frmCreditNote with a subform sfrmCreditNote. They are linked by a creditNoteNumber.
As soon as i pick a customer in the main form, i want the first line of the subform to have that customer name as well.
If I change the customer name in the main form, I need the first line of the subform to correspondingly change as well.
If the form was new, i would open a recordset and use .AddNew to put in the new first line date
If I was updating the form customer name, then I would need a .Edit to change the first line of the subform.
My question is : how do I determine if the subform is empty? Is it a command likeIf subform.HasData, orIf IsNull(?)Please let me know thanks

View 1 Replies View Related

Forms :: Set Focus To Last Line Of Subform

Jan 21, 2015

I have a single main form with a datasheet subform. When I scroll through the records shon in the main form, each has a different set of child records shown in the subform.

I want the focus to be on the last record of the subform each time.

On the main form, I have a button and this code

Code:
Private Sub cmdLast_Click()
Me.frmRevisionsSub.Requery
Me.frmRevisionsSub.SetFocus
Me.frmRevisionsSub.Form.txtRevTag.SetFocus
DoCmd.GoToRecord , , acLast
End Sub

which works perfectly, when I click the button.

If I call this code from main form's OnCurrent, focus remains on the first line of the subform instead of going to the the last. I have an inkling that it has to do with when the requery of the subform takes place, when I scroll through the records on the main form.

View 1 Replies View Related

INSERT Query - Insert New Data Only

Jul 2, 2010

Table TBL_NEWDATA is used to append new data to table TBL_PERSON_ALLOCATIONS.

TBL_NEWDATA { Person_ID, Department_ID }
TBL_PERSON_ALLOCATIONS { Person_ID, Department_ID, ... }

I need to devise a query to append data for a particular Department_ID from TBL_NEWDATA to TBL_PERSON_ALLOCATIONS where that data does not already exist there. i.e. for Department_ID 'Research', I would want to append 'Person_ID', 'Department_ID' (in this case: 'Research') to TBL_PERSON_ALLOCATIONS for any tuples not already held.

INSERT INTO TBL_PERSON_ALLOCATIONS (Person_ID, Department_ID)
SELECT Person_ID, Department_ID
FROM TBL_NEWDATA
WHERE TBL_NEWDATA.Department_ID='Form...'

[code]...

This Query takes a single argument from a control (Forms!Main!IN_Department), and this is the Department_ID to be updated.Is there any way to do this using a single query or will I have to use sub queries? I'd hoped not to as to keep the database as concise as possible.

View 2 Replies View Related

Forms :: Sum Line Items From Subform On Main Form

Jul 28, 2013

I have an Orders form (frm-Orders) that includes a subform (frm-Order Details Subform). The subform has line item totals.I want to be able to sum the line item totals and show the result on the main form, but I can't get it to work. Seems like it should be an easy thing to do.

Someone suggested I try this but it didn't work:

In the footer of the subform I created this expression - =SUM([Line Item Total].

Then in the main form I created a textbox with this -- =[Forms]![frm.Orders].[Form]![frm-Order Details Subform].[Form]![txtSum].

View 11 Replies View Related

Forms :: Eliminating Header Line In Datasheet Subform

Aug 10, 2014

With a particular client, they want to display a subform in datasheet mode. They do not want an alternative like continuous forms. If I am displaying the subform in datasheet mode, is there any way to eliminate the header row which contains the names of the columns in the subform? I know how to remove the captions themselves but the header row is still there. I don't think it can be done but I wanted to check here with those more familiar with this.

View 6 Replies View Related

Forms :: Adding New Record Line In A Subform After Pressing Add Button

Apr 9, 2014

How can I add a new line of record below a previous record after pressing the add button? I have attached a picture of my project.

View 3 Replies View Related

Queries :: Remove GROUP BY Line And Stick Semicolon At End Of Previous Line

Jun 25, 2013

Here's the statement

Code:

sqlfinal = "SELECT Employees.ID, Employees.Name "
sqlfinal = sqlfinal & "FROM ((qryDeptVBA INNER JOIN qrySkillVBA ON qryDeptVBA.ID = qrySkillVBA.ID) "
sqlfinal = sqlfinal & "INNER JOIN Employees ON qryDeptVBA.ID = Employees.ID) "
sqlfinal = sqlfinal & "INNER JOIN qryAreaVBA ON Employees.ID = qryAreaVBA.EmpID "
sqlfinal = sqlfinal & "GROUP BY Employees.ID, Employees.Name;"

If i simply remove the GROUP BY line and stick the semicolon at the end of the previous line (.EmpID; ) it works just fine. How is adding a group by line causing an error?I tried adding another parenthes at the beginning ((( and ending the joins as EmpID); and that failed with the exact same error.

View 12 Replies View Related

Forms :: How To Get Values From Line Items Form Inserted Into QUOTE LINE

Jun 5, 2014

I have a main form with 3 sub forms. The main form is tied to a table called QUOTES_MASTER. The first sub form is tied to a table called QUOTE_ LINE_ ITEMS_DIRTGLUE. It calculates the subtotal when selecting items. The relationship is one-to-many linked on QUOTE_ID.

The second sub form adds up total of all line items and is not tied to a table.The third sub form adds ESTIMATED FREIGHT to the PRODUCT TOTAL and is not tied to a table. how to get the values from the line items form inserted into the QUOTE_LINE_ITEMS_DIRTGLUE table as they are added.

I also want to insert the total value from ESTIMATED DELIVERED into the LINE_TOTALS field in the table QUOTES_MASTER.I tried this code on the product total sub form but it doesn't do anything and there are no errors:

Private Sub PROD_SUB_AfterUpdate()
DoCmd.RunSQL "UPDATE QUOTE_LINE_ITEMS_DIRTGLUE SET QUOTE_LINE_ITEMS_DIRTGLUE.SUBTOTAL = Me.PROD_SUB WHERE QUOTES_MASTER.QUOTE_ID = " & Me.QUOTE_ID

View 6 Replies View Related

Modules & VBA :: Read CSV Transaction File Line By Line And Add Correct Transactions To Access Table

Nov 29, 2014

I have a module which reads a CSV transaction file line by line and adds the correct transactions to an access table and places the wrong ones in a logfile.Now some transactions are rejected twice there is even one rejected six times. Whereas one wrong transaction is processed only once. I am certainly overlooking something obvious in the logic but what. Here is the relevant code.

Code:

Function ImportCSVForConfederation(inputCSV, ORG)
Dim TNO As Integer, TACT As Integer, TABLE As String, TLINE As String, I As Integer, J As Integer, K As Integer
Dim FLD1 As String, FLD2 As String, FLD3 As String, FLD4 As String, LogFile As String, LogPath As String
Dim Lim As String, ITNO As Integer

[code]....

View 8 Replies View Related

Insert Rows Into Subform Problem, Help!

Dec 8, 2006

hi i have a main form called "frmMain" that i use for users to add new studentsNumbers txtStudentsNumbers.bound to tblStudents also this form has a combo box called cmbDepartments coming from tblDepartments.

Then a subform which right now it has a combobox called cmbSubDepartments (coming from tblSubDepartments) , this combobox has a rowsource to update everytime someone selects a dept in the main form so it shows the subdepartments belonging to the departments.
Each department has a a set of Subdepartments, also has two texboxes called txtTuitionA, and txtTuitionB.
so in total i have three tables each with the pk id.



what i need is that when a user enters a student number in the main form, select the department where they want to add the student to, then the subform gets automotically populated with all the subdepartments so then the user is forced to enter TuitionA and tuition B to each subdept for that particular students

i tried this...

(in the main form)

Private Sub cmbDepartment_AfterUpdate()
Dim intQty As Integer
Dim i As Integer


If MsgBox("Are you sure you want to add a new tuition plans for this student?", vbYesNo) = vbYes Then
Me.txtStudentID = DMax("StudentID", "tblStudents") + 1 'get New student number 'Add the new row into Main Table tblStudents

intQty= me.cmbSubDepartments.itemdata -1

For i = 1 To intQty - 1
strSQL = "INSERT INTO tblStudent (StudentID, SubDepartmentID) SELECT StudentID, SubDepartmentID FROM tblSubDepartments WHERE SubDepartmentID = " & Forms!frmStudentsTuitions_subform!cmbSubDepartment s & ";"
CurrentDb.Execute strSQL


Next i

Me.frmStudentsTuitions_subform.Requery
Me.frmStudentsTuitions_subform.SetFocus



Else
DoCmd.CancelEvent 'if user choose no in question then undo
DoCmd.Close acForm, Me.Name 'close current form

End If


End Sub


but my subform does not get updated... :-( .

View 4 Replies View Related

Modules & VBA :: How To Import Text File Line By Line

Nov 18, 2014

I am having a little difficulty with my importing in Access. Every time I import my text file, the lines will be jumbled. I have been reading up and I found this recordset code that seems to be what I need:

Code:
Dim strLine As String
Dim intLineNum As Integer
Dim MyDB As DAO.Database
Dim rst As DAO.Recordset
Open "C:TestTest.txt" For Input As #1
Set MyDB = CurrentDb
Set rst = MyDB.OpenRecordset("tblResults", dbOpenDynaset)
CurrentDb.Execute "DELETE * FROM tblResults", dbFailOnError 'Clear tblResults

[code]....

Basically, this code will extract data from the text file as long as it fulfills the Mid$ criteria. Here's where my problem comes. Each line in my text file is of different lengths and I have to capture the entire line.

I think using the Left$ function would work, but I don't know how to determine the character count such that the entire line of text would be inserted into the table.

Another difference between what I need and the code above is that, I am required to store each line into each row of my table, meaning

Line 1 is placed in Row 1 Column 1
Line 2 is placed in Row 2 Column 1
Line 3 is placed in Row 3 Column 1
.
.
.
Line X is placed in Row X Column 1.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved