When I run this query I want the data inserted into an existing table in the correct place. It is inserting the data in the correct column but not the correct rows. Please see attached screenshot. Can you please show me what I'm doing wrong.
INSERT INTO UNDISTRIBUTED ( Jun2003 )
SELECT Sum(CCur(a.AMT_TO_DISTRIBUTE)) AS AMOUNT
FROM NOLDBA_RECEIPT AS a, NOLDBA_INT_CASE_STATUS AS b
WHERE (((Trim([a].[id_case])) Is Not Null) AND ((a.ID_CASE)=[b].[case_id]) AND ((a.CD_STATUS_RECEIPT)='H') AND ((a.DT_END_VALIDITY)=#12/31/9999#) AND ((Exists (select 1 from NOLDBA_RECEIPT k where a.dt_batch=k.dt_batch and a.no_batch=k.no_batch and a.cd_source_batch=k.cd_source_batch and a.seq_receipt=k.seq_receipt and k.ind_backout ='Y' and k.dt_end_validity =#12/31/9999#))=False)) OR (((Trim([a].[id_case])) Is Null) AND ((a.CD_STATUS_RECEIPT)='H') AND ((a.DT_END_VALIDITY)=#12/31/9999#) AND ((Exists (select 1 from NOLDBA_RECEIPT k where a.dt_batch=k.dt_batch and a.no_batch=k.no_batch and a.cd_source_batch=k.cd_source_batch and a.seq_receipt=k.seq_receipt and k.ind_backout ='Y' and k.dt_end_validity =#12/31/9999#))=False) AND ((b.CASE_ID)=(select min (y.case_id) from NOLDBA_INT_CASE_STATUS Y, NOLDBA_INT_CASE_MEMBER Z WHERE A.ID_PAYOR=Z.MEMBER_ID AND Z.RELATION_CODE IN ('A','P') AND Z.CASE_ID=Y.CASE_ID)))
GROUP BY b.IV_D_DO_CODE
ORDER BY b.IV_D_DO_CODE;
I have a table which contains the following fields: WORKER,SUB SYS,JAN-08,FEB-08,MAR-08 I want to insert into this table each month the data from the second table for that month can someone tell me how to do this...each time I try the secnd table data TOTAL strarts a new row below the ones that are already there...hard to explain. I tried this and it didn't work:
INSERT INTO [ORACLE SORA ALERTS BY WORKER] ( [JAN-08] ) SELECT A.TOTAL FROM A INNER JOIN [ORACLE SORA ALERTS BY WORKER] ON (A.SYS = [ORACLE SORA ALERTS BY WORKER].[SUB SYS]) AND (A.WORKER = [ORACLE SORA ALERTS BY WORKER].WORKER);
WORKER SUB SYS JAN-08 FEB-08 MAR-08 0000A CRT 0000A ENF 0000A FIN 0000A RAP 000AT CRT 000AT ENF 000AT FIN 000AT RAP 000AX CRT 000AX ENF 000AX FIN 000AX RAP I have a second table which contains the following fields: WORKER,SYS,TOTAL
WORKER SYS TOTAL 0000A CRT 1 0000A FIN 21 000AX CRT 1 000AX ENF 2 000AX FIN 11
What I want is to move the numbers in the TOTAL COLUMN INTO THE MONTH/YEAR COLUMS IN THE FIRST TABLE. Would look something like this:
WORKER SUB SYS JAN-08 FEB-08 MAR-08 0000A CRT 1 0000A ENF 0000A FIN 21 0000A RAP 000AX CRT 1 000AX ENF 2 000AX FIN 11 000AX RAP
adding columns in Access2013,I'd like to add a column to an existing datasheet and place it between 2 existing columns,I see where and how to an a new column but don't see where I can insert it where I want it.
I've got a query that takes a part number, strips off the un-needed prefixes and suffixes, and gives me just the meat & potatoes of what I need.
I'd like to insert these results into a particular column in an existing table. Say the column name is Part_Number and the table name is CompletedWork. What would the SQL look like for that? I think this is relatively simple but my SQL skills would never be found in the same sentence as 'good'.
TIA for the help. This forum is an incredible source of information.
I am at work, and I have acquired a database that prints labels. They now want the database to be coded so that after certain labels are printed the database will print a blank label. I have the code figured out as a Do While statement in order to print the blank label. The problem I am having is that I am trying to use the Insert Into command to insert the filepath into the table that adds the blank label.
|DoCmd.RunSQL "INSERT INTO Rod_tmakLabels ( Print, [Order] ) SELECT Yes AS Expr1, 'Rods Labels' AS Expr2"|
If I run the above command, it just adds the text "Rods Labels" at the end of the table. Is there anyway with the INSERT INTO command that I can insert the new label between the 2nd and 3rd row and add another row? Or is the command designed only to add a new row to the end? I haven't had any luck searching for this yet.
-Existing Access Database contains tables with 1-2 million records
I would like to add a field[dol] to an existing table[rei]. I need this new field[rei].[dol] to be populated with existing data from another table[main] based on the associated field[main].[account1] or [main].[account2] or [main].[account3].
In the [main] table. There is always data in [dol]. But there is NOT always data in the [account] fields. Sometimes there is multiple account numbers per [dol] but not always.
Customers will ALWAYS have at least 1 [account] number and [dol]. Some will have multiple [account] numbers and [dol]. Sometimes these [account] numbers are the same in multiple fields[account1] [account2] [account3].I just need to do a lookup or something to find the [account#] and pull in its [dol] from the [main] table and populate it in [rei].[dol].
I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?
Hoping someone can help me with this DELETE query. I have a Main table that's being updated by a Temp table that's an exact copy of the Main table but with a subset of records.
1) Insert records from Temp table NOT found in the Main table - this query I have worked out below - not tested, but the results look correct.
Need Help Here... 2) Delete Records from the Main that are not found in Temp table with an exception...only DELETE records where certain key fields are matching. i.e. If S.CAD_NAME, lngStoreNumber are a match to what's in the Main table. While Temp table: lngStoreNumber - CAD_NAME - lngcomponentSerial 1 - "CHK" - a 1 - "STK" - a 2 - "CHK" - a
Main table lngStoreNumber - CAD_NAME - lngcomponentSerial 1 - "CHK" - a - LEAVE (EXISTS In Both Tables) 1 - "CHK" - b - DELETE (lngStoreNumber & CAD_NAME composite Found /lngcomponentSerial NOT Found in Temp) 1 - "STK" - a - LEAVE (EXISTS In Both Tables) 1 - "RMM" - a - LEAVE (lngStoreNumber & CAD_NAME NOT Found in Temp) 2 - "STK" - a - LEAVE (lngStoreNumber & CAD_NAME NOT Found in Temp) 2 - "CHK" - b - DELETE (lngStoreNumber & CAD_NAME composite Found/lngcomponentSerial NOT Found in Temp) 3 - "CHK" - a - LEAVE (lngStoreNumber = 3 Not in Temp table Subset)
Rule: Only delete the records for a particular CAD_NAME and lngStoreNumber from the Main table leaving all other CAD_NAME/lngStoreNumbers.
I'm running these updates in batches of lngStoreNumber. So the Temp table will only contain subsets of what's to be deleted from the Main table thus the need to link on the key fields only NOT to delete a Subset of lngStoreNumber/CAD_NAME. I think I've tried every possible query that doesn't work.
Here is query #1 to insert records missing from the Main table that exist in the Temp table. I think what I need is a variation of this??? SELECT D.* FROM Main AS S RIGHT JOIN Temp AS D ON (S.CAD_NAME=D.CAD_NAME) AND (S.lngcomponentSerial=D.lngcomponentSerial) AND (S.lngStoreNumber=D.lngStoreNumber) WHERE S.lngcomponentSerial is null AND S.CAD_NAME is null AND S.lngStoreNumber is null;
I am working from an existing database which is just two table. The main table has a massive amount of redundancy and duplication and needs splitting into, at first glance, 5 tables.
After I have run my various make table queries and added a Primary Key and FK field to the new tables how do I populate the FK with the Parent PK.
I thought I could simply add all the fields from the new table and then create an adhoc join in an update query to populate the PK to the FK. When I do this however I get "You are about to update 0 records"
I have tried the table analyzer but it doesn't give the correct options to split the table the way I need.
I have a table with employees’ information. I want to copy all records in this table to another existing table “WorkTimes”. I do not want to edit my employee table, so therefore I want to copy all records to another table before editing/adding information in other fields. How I can do that with a macro or module?
I have an inventory table and a repair table for computer equipment. The inventory table is already set and working with all the data I need.
In the repair table, I would like to just enter the ID number and have some of the information already stored in the inventory table automatically entered into the repair table as needed.
For example, computer 138 has repairs done to it. I would like to then go into the repair table to add a new entry, type in 138 and have the some of the data from inventory table (model, serial number, etc) transfer into the repair table.
Is this possible with Access?
I have only been able to do something with the lookup wizard, but that doesnt seem to work well.
This has to be an easy one but I can't seem to figure it out. I created a table by importing the structure from a .dbf file. Now I simply want to import other .dbf records from a bunch of .dbf files that have the exact same structure. How do Import these records into my existing table?
This should be a no brainer but I have spent an hour or so searching the help file and the internet.:mad:
Please bear with me, first post, trying to get to grips with Access for work!
We (a primary school) had a "bespoke" database set up using MS Access by someone who has long left the area and now we need to make changes and I, as the most computer literate person on site, have been volunteered to make these changes.
My level is beginner (for now) and my first job is to add some new options to a "Titles" table, four columns, six records. Column1 = ID#, Column2 = Male Titles, Column3 = Female Titles, whilst Column4 seems to hold items from Columns 2 & 3.
If I add a futher option, I get the error "Can't perform cascading operation: Entry must be one of the Titles as featured in the drop-down box or in the Titles table.
Now, as far as I can tell, I HAVE added the new option to the Titles table, and they DO show in the drop down box in the main spreadsheet display, BUT the error comes back as soon as I try to confirm the new title.
I am trying to add an existing field from one table into another table but the table Im currently in shows that option to be greyed out. What would cause that option to be greyed out?
I feel like this is one of the standard uses for Access but for the life of me can't get it to work with an existing Table.
Essentially a table with a ton of records is imported via VBA. One of the fields is ObscureCode, for argument sake there are three codes: 001, 002, 003.
Is there any way to say when the ObscureCode cell value = 001, display Code Red. When it's 002, display Code Yellow.
I have tried setting up a relationship but that just clears all the fields in ObscureCode column. Is there a way to do this through VBA? I ask because I imagine when someone imports new data (the table is deleted and re-created with new data) the relationship will break. SO I will need to put in the VBA a way to link them back up.
I have a table that contains a notes field. What i would like to do is to append to this field in table with some more data (notes), however i dont want to over write the existing data. I would just like to add to it.
the current notes are added through the access front end, but in this instance i have a particular note that needs to be added to various enteries without overwriting existing data. I know this is to be done via an append query, any help would be great
Please help.... I have combined 2 Tables using a select * query. I have to do it this way as the data changes. The issue I have is that in both tables there is a common field called "Amps" Hence my resultant table has 2 columns, Table1.Amps and Table2.Amps. Every time this occurs I want to delete Table2 column entirely as I use this table to plot a graph.
In short- I need to know the code to delete a column from an existing Table.
I have one table which holds the answers to a medical questionaire. 300 questions to be exact. This table has a Primary Key which is just an autonumber.
The problem I have, is that the questionaire results will be updated from time to time. Not the whole questionaire but maybe a couple of fields. Is there a way that the user can go back to the questionaire make the changes needed and then save, but at the same time still keep the original results in the table, but assign a new autonumber? The reason is that they do not want to fill out the whole questionaire again just to make a small change, but I need to keep all the results going back in history!!!!!
Sorry if I havent explained this perfectly. I have looked at the appen query and the update query but not sure if this would be correct procedure.
Thanks in advance. You dont have to tell me exactly how to do it but a hint in the right direction would be nice.:)
I have a table with more than 700,000 records. There are no unique fields or unique combination of fields. I would like to add an AutoNumber field but when I try I get the message:
I was adding an autonumber field to an existing table and I assumed the numbering would follow the order of the primary key but that doesn't seem to be the case.
What I have is a database that I have done some tweaking on and in the meantime the original db has been in use which has added around 200 or so more records in the table.
What I would like to do is to just update the db that I have been working on with the older db table(the one who has the additional 200 records).
EX. DB A(Old DB, Newer Table) DB B(New DB, Older Table)
I want to put DB A table into DB B
Is this a simple fix? Or do I need to write some sort of query to update the records in the old table? I've tried to export the excel file and then import but it puts it in unrelated objects and then my switchboard or nothing works.
tblProductFacilityMM - ProductToFacilityID - ProductIDFK (combined with FacilityIDFK to make a PK) - FacilityIDFK
As I'm writing this out, I am realizing that tlbProductFacilityMM.producttoFacilityID is probably not necessary, but that I don't expect that to have much significance to the issue. So I've setup a query between the two tables:
Code: SELECT tblProductInfo.ProductID, tblProductInfo.ItemNumber, tblProductInfo.JDEDescription, tblProductFacilityMM.FacilityIDFK, tblFacility.FacilityDescription FROM tblFacility INNER JOIN (tblProductInfo INNER JOIN tblProductFacilityMM ON tblProductInfo.ProductID = tblProductFacilityMM.ProductIDFK) ON tblFacility.FacilityID = tblProductFacilityMM.FacilityIDFK;
And used it to create my subform which is simply a drop down box for tblProductFacilityMM.FacilityIDFK. My main form is one that has already been in use for 6 months or so, it is based off the tblproductinfo table and needs to have the option to select multiple Facilities for each ProductID. I inserted the subform, but when I try to select a facility I get an error that reads:
Quote: Cannot Join Records; Join key of tblProductFacilityMM not in recordset.
Each month I receive a new excel spreadsheet (alpha Roster), Last month I created a form so that I can track certain things off of the Table (spreadsheet), I just received the new Spreadsheet for this month and was wondering if I can use the existing form and how hard it is to link it to the new spreadsheet? Is that even possible? I don't want to have to re create the form every month, I would like to just bring the new alpha roster in and be ready to work.
I have a form (frmCompany) which has two combo boxes (cmbCompany and cmbCity) which is used to add field data into a table (tblCompany). The Company field is the only required field the other is optional.
In some cases I may wish to add a City, at a later date, to an existing Company using frmCompany. I now select the company from the cmbCompany combo box then add the city to cmbCity. The problem is that when I close the form I get two companies in the table with same name, one has a city and one does not.
How can I add a new City to an existing Company, using the form, without adding a new Company?
