I have an Access 2002 database (about 120mb) which was replicated using Replication Manager (version unknown). It is set up to use Internet Synchronization. We use it on state government LAN and WAN as well as the Internet. It works well in most cases, but on a few computers we get the error "Http address not found" when synchronization is attempted. The address is indeed visible to those computers. We have determined that reloading Windows (XP Pro) will usually solve the problem at least for a while but when GIS mapping software is installed it reappears. More worrisome is that some brand new laptops with factory-installed Windows are showing the same problem, which means it could get worse as we upgrade equipment.
Trying to sync between a back end database and one of the replicas we use. Getting the error "The search key was not found in any record" Error 3709 while peroforming ISAM Seek.
Does anyone know how to find the offending record that is causing the problem? It's not related to an indexed memo field either. The only field that is indexed is the AutoNumber Primary Key field.
The only other option I see is to bring up both tables, manually input the differences, and create a new replica.
Hi I'm totally stuck creating a form because I don't know how to set up my combo boxes. The database is about tiles and the forms for data entry to create an invoice with one combo box to hold the tile range eg: White, blue, etc. I want the second combo box to hold the details on the tile names of the range chosen in the first combo box. eg: if 'white' is selcted in the tile range combo box, then only the names of the white tiles should appear to be selected from in the 'tile name' combo box.I then have a separate field to display the price of the tile depending on the range chosen. This is for some exam coursework and the guidelines specify that I'm not allowed to use VB or other code. Could someone please tell me how exactly I can sort this out so that the three are linked (2 combo boxes and the price field)?(queries?adjusting form properties?) All the details on tiles are stored in one table. Any guidance is greatly appreciated.Thank you so much. -Camryn
We are running Access 2002 on Win2k. The database has been split into front and back ends, and synchronization occurs directly over LAN with 7 replicas. During synchronization I received a failure message "The search key was not found in any record. (Error 3709)."
I have tried several things found on Microsoft KB and other forums-- Compact and repair, removing indexes from memo fields, updated Jet and Microsoft Data Access Components-- but nothing has worked. Does anyone have any ideas on this one? Thanks, James
Hello. i'm working with 10 replicas and a design master, but when i tried to add new tables and forms i get the message (Error 3492) " The synchronization failed because a design change could not be applied to one of the replicas" and after that, i cant synchronize anymore!!! i don't understand what could be the problem. thanks if anyone can help.
I have created a form with sub-form and I would you tell me how I should do in order to screen data in sub-form transferred from main form. It looks like:
The subform, which is in datasheet view, contains two dropdown boxes, Country and District (1-n). I want the district dropdown to only display records based on what's selected in the country dropdown. There will only ever be any content in District if one country is selected (let's say country 'A').
I've used the code below (one of many attempts!) to try to achieve this, but it doesn't seem to have the effect I want. It seems that if I select country 'A' from the country dropdown, the District rowsource is as expected for that particular record. However, the rowsource for every other District in the list of records in the subform also now has the same rowsource even where the country <> A.Similarly, if I select <>A from Country, the rowsource fro every district is now empty, even if the country selected in another row is A.
I have a main form with a subform. On my main form, I have a combo box set to "find a record on my subform, based on what I select in the combo box." This works great! At the same time, I want to use this main form combo box to synchronize with a combo box in the subform to display a value based upon the value selected in the main form's combo box. I have tried several things and searched Access newsgroups without success. I am using MS Access 2002, producing an Access 2000 database. Has anyone got any ideas? I could really use some help. Thank-You.
I have been using replication successfully for years. Recently the PC where my Design Master resided crashed taking the hard drive with it. No problems I thought, I used a replica to recover the design master and placed it on the new hard drive (the OS and Access was upgraded from 2000 to XP, however the Access 2000 file format was retained – there are still a couple of laptops with only W2000 software). I understand that moving the path of replicas or design masters is no no, so I proceeded to start from scratch and create a complete new batch of replicas based from the new design master.
Everything was going to plan UNTIL a replica was routinely synchronized with the design master. The design master reverted back to a replica. I recovered the design master again, everything looking fine until again a synchronization causes the design master revert to replica.
Next plan of attack to hopefully fix a potential corruption problem: create a new blank database, import all (non-system) tables, compact and repair, and create a new replica from scratch. From the design master, I created the complementing replicas and sure enough the Design Master again reverted to a Replica after a routine synchronization.
I repeated this “start from scratch” procedure, and the same results prevailed. I am at a loss especially since I verified that the hidden system MSysReplicas table had only two entries after the Design Master and Replica were first created.
I would greatly appreciate any ideas of where to go next with this problem.
I have recently created a database meant for managing inventory. I have started writing queries and building forms, and a lot of it is running smoothly, but I am having a few snags.
To give a brief background, I am currently designing a form in which a user will fill out when an incoming part comes into our company. The form NEEDS to ask the user for at least the PartNumber and the PONumber, but the way I have my relationships set up, I am not exactly sure how to design the forms (not the physical layout, but where the data goes). So when I have an incoming part, will I use the PartPOID to figure out which part number and PO number it is? I am not exactly sure how to make a form for the user that is not confusing.
Attached is a picture of my relationships and my database.
I have a database which is being used for maintaining documents status. Its working fine in stand alone PC. I want to share it on internet. But problem is, I can upload the complete file, then download and use. Its not updated. So is there any way to upload this db onto internet and work there only the way we do in single PC?
Hey, I am currently designing a database for my group of friends. Things such as ,Name, Age, Musical Instrument, Band (of which they play in), Favourite Band etc. would be in there indefinately.Its not a complex Db and so I was hoping to put it on my website but dont know how i would do this...I would like it to be on the internet as if you were just looking at it on your own computer and webmaster could edit any fields after it is finished. Is there anyway of doing this? If yes is there any way of doing this without the viewer having to download the Db?
I have created an access database for work. Due to the size(70MB) of the database our internal network appears to have difficulty executing any queries or has long delays. I dont think the size is the issue, however I am now looking for ways to place on "internet" page but only want users to run the reports off control buttons /macros of the forms view not see the tables or query design. Any suggestions of best to approach this, Also any input about "project" or "ADP" woud, be very useful, thanks Andy
Does anyone know what's the best way to send a mdb file via the internet. I've tried sending is as an email attachment and putting is on a webserver for downloading. Both wayes only gives errors.
I was wondering if it is possible to connect a MS Access front end to a MS SQL server on the internet in a secure way through ODBC or some other means. Anyone have any ideas?
Is it possible to transfer data over the internet if the BE is in one country and the FE is in another? If so, could someone explain how I would go about doing this? I'm in the Military and when we deploy it's normally to a far off country.
Hi all, I have done a multi user database for a private company (and thanks to all those that helped me out) but now I need to do another database to put onto the Internet so the general public can view it and order the products. Obviously some of the database needs to be private (so I can update records) but some needs to be viewed over the Internet. I would like the general public to be able to view the products over a web page, not download a program to view the database.
I have made the database already so I can pull up a web page (from within access) and order the products - all I need to know is how to do this over the Internet?
I don't expect anyone to hold my hand through this, I just ask if anyone has a link to a walkthrough so I can do this?
Regards, James
PS Have another question - I have 17, 500 records and I wish to add a new Field, how can I change the values of the Field without going thorugh them one by one? e.g If the Record has 'Rarity = U' then I want the 'price' (which is the new field) to equal 1.
I am trying to create a database such that everyone in my company will be able to access it, but without having to install access and put a link to the DB on every computer. Ideally, I would like to have some sort of web applet that uses the DB on a central server and allows users to add and modify entries without having to know anything about Access.
I´m thinking of starting to use office XP for a small system I have. My question is:
Is office XP more compatible with internet explorer in terms of VBA automating? I have had to work around internet explorer quite a lot in office 97, and I haven´t been able to do what I want.
There is an online form which we need to fill out for each of our inventory units. This form has several dozen fields though. We have to fill each one out for every unit that we ship (which is about a hundred a day).
But the good news is, about 25 of these 30 fields are always filled in with the same value (our name, address, city, state, zip, insurance, insurance no, carrier, carrier no, etc).
What we want is a way to fill out these fields for us automatically, and all we have to do is type in the remaining 5 fields ourselves.
My temporary solution was to create a form with 5 fields and a Submit button. Then using AppActivate "Inventory Adjustment - Microsoft Internet Explorer", we would use the SendKeys function and virtually "type" in the 5 variable values and the 25 other "hardcoded" values, using the Tab key to move in between fields.
However, we have encountered some issues using SendKeys. For one, the cursor doesn't always start in the correct place, and the fields become horribly offset and skewed. Also we notice that sometimes the cursor moves "too fast" apparently and skips pasting some of the values (an issue we tried to resolve by using "wait" commands, but it didn't help consistently enough).
Is there a better way to use Visual Basic to fill in fields in an Internet Explorer window? :(
