I've "inherited" someone else access DB and I need to interpret this selection logic:
IIf(IsNull(a.[Lifecycle Stage 4 Sub-Stage]),IIf(IsNull(a.[Lifecycle Sub Stage 2]), a.[Lifecycle Stage], a.[Lifecycle Sub Stage 2]), a.[Lifecycle Stage 4 Sub-Stage]) AS [Sanitized Phase],
What I think it's saying:
If [Lifecycle Sub Stage 2] is null, use [Lifecycle stage], if [Lifecycle Sub Stage 2] is not null use [Lifecycle Sub Stage 2].
If [Lifecycle Stage 4 Sub-Stage] is not null, use [Lifecycle Stage 4 Sub-Stage].
I am not 100% sure if this is the correct interpretation as I have not had much previous experience interpreting multiple IIF statements in access. My aim is to migrate this process to Oracle, so I am just trying to get a handle around all the Access logic so that I can replicate the same behavior in another environment.
I have a field which shows numbers 1-8 or is null. I want to group this to show if its 1,3,5,7 then it shows as "BOOK" else if its 2,4,6,8 then its "CHAIR" and if its null then show it as null Can anyone help - I am using Access 2003
I'm new to programing so if this is not possible please tell me! Because this is going to be hard to explain I attached an example.
I have a Main form that a user will open, this is the only window that will ever pop up in front of them so it has a subform that will open differnt froms by picking buttons on the left.
One of the sub forms is the Member Information form, this form will show member information than at the bottom has another subform that will allow a user to pick a button above it to open another subform (this is so member info is always show and a member can be registered, pay...all different subforms)
on the Event Register subform the "Class" pulldown is based on the event that was pick just above it.
Issue: when I am in the main form, I can not get the class pulldown to work it always prompts me for "enter Parameter Value". I have tried the following SQL statements in the row source and noting work.. what am I missing???
SELECT SubCatList.SubCatName, SubCatList.EventName FROM SubCatList WHERE (((SubCatList.EventName)=[Forms].[MainFRM]![MemberInfoFRM].Form]![EventRegFRM].[Form]![EventName]));
and
SELECT SubCatList.SubCatName, SubCatList.EventName FROM SubCatList WHERE (((SubCatList.EventName)=[Forms]![MainFRM]![MainSubFRM]![Form]![memberinfoFRM]![MemberSubFRM].[Form].[EventName]));
I thought the whole point of the ; sign at the end of a sql statement in access was so that you can run more than one query at a time? if this is the case, could you tell me why this doesn't work? Code: sqlStr = "UPDATE tabControlFeeType SET FeeAmount = " & txtFirst.Text & " WHERE KeyFeeType = 1;" & _ "UPDATE tabControlFeeType SET FeeAmount = " & txtSecond.Text & " WHERE KeyFeeType = 2;" & _ "UPDATE tabControlFeeType SET FeeAmount = " & txtThird.Text & " WHERE KeyFeeType = 3;" Dim comm As New OleDbCommand(sqlStr, conn) comm.ExecuteNonQuery() the query doesn't work if I put it straight into access either?
I have a form with multiple controls (textboxes) named: Father Mother Child1 Child2
On the form there are also two checkboxes (check1 and check2).
I am using the following statement for each control and placed in in the OnCurrent event of my form: If Not IsNull (Me.Fater) Then Me.Check1 = "YES" (or -1) Me.Check2.Value = False End IF
Is there a way I can write one If statement saying: If all controls Father, Mather, Child1 and Child2 or at least one of them has data, then Check1 should be selected and check2 emply. If all controls do not have data then ckeck1 should be empty and check2 selected.
I have the following code on an After Update event:
If Me.Program_Type.Value = "(1) 45 Minute Formal" And Me.Cost_Category = "Full Price" Then Me.ProgPriceTxt.Value = "85" End If
This works fine. When I add another "And" to the statement, however, it no longer functions:If
Me.Program_Type.Value = "(1) 45 Minute Formal" And Me.Cost_Category = "Full Price" And Me.PavRentCheck = False Then Me.ProgPriceTxt.Value = "85" End If
Is it possible to put three conditions into an And statement? This thread seems to imply so (it's a different situation, but it seems close enough).
I believe it doesn't have anything to do with my text boxes or fields because this same issue has occurred in other places when I tried to have three conditions in an And statement.
First off thanks for this forum it has gotten me this far. 2nd I have a question on how the best way to accomplish this. So I have a table that has customer info in it, Account #, Name, city, state, Zip. I have a form that allows users to type in fields to query for particular info. My select statement is below.
Private Sub cmdSearch_Click() Dim strSQL As String, strOrder As String, strWhere As String Dim dbNm As Database Dim qryDef As QueryDef Set dbNm = CurrentDb()
If Not IsNull(Me.txtCSONME) Then strWhere = strWhere & " (tblCONSOLIDATED.COMPANY_NAME) Like '*" & Me.txtCSONME & "*' AND" End If
If Not IsNull(Me.txtCSOSLD) Then strWhere = strWhere & " (tblCONSOLIDATED.ACCOUNT1) Like '*" & Me.txtCSOSLD & "*' AND" End If
If Not IsNull(Me.txtCSOSSM) Then strWhere = strWhere & " (tblCONSOLIDATED.REP_NUMBER) Like '*" & Me.txtCSOSSM & "*' AND" End If
If Not IsNull(Me.txtCSOARN) Then strWhere = strWhere & " (tblCONSOLIDATED.CONTACT_NAME) Like '*" & Me.txtCSOARN & "*' AND" End If
If Not IsNull(Me.txtCSOCTY) Then strWhere = strWhere & " (tblCONSOLIDATED.CITY) Like '*" & Me.txtCSOCTY & "*' AND" End If
If Not IsNull(Me.txtCSOST) Then strWhere = strWhere & " (tblCONSOLIDATED.STATE) Like '*" & Me.txtCSOST & "*' And" End If
Everything works but I can only search for one state. So now I want to search for two or more states. I've added multiple text fields on my form and have tried approaching it that way. Unfortunily if I add txtCSOST2 for example then add
If Not IsNull(Me.txtCSOST2) Then strWhere = strWhere & " (tblCONSOLIDATED.STATE) Like '*" & Me.txtCSOST2 & "*' And" End If
tblCONSOLIDATED.STATE has to contain both state codes. If I put an Or instead of And I get both states and all other search critera is ignored. Basically I need to be able to query by two or more states and it still be an and I guess. For example we may have a Rep A (Me.txtCSOSSM) that goes into TX & OK but Rep B also has a peice of TX. If I'm looking all the accounts that are in TX & OK and are Rep A and I use the below code I get all of the TX & OK accounts as well as Rep A accounts.
If Not IsNull(Me.txtCSOST) Then strWhere = strWhere & " (tblCONSOLIDATED.STATE) Like '*" & Me.txtCSOST & "*' Or" End If
If Not IsNull(Me.txtCSOST2) Then strWhere = strWhere & " (tblCONSOLIDATED.STATE) Like '*" & Me.txtCSOST2 & "*' Or" End If
I know that has to be simple I just wrap my brain around it. Let me know if this needs further explaination.
I have tried searching and haven't found an answer to this question.
I have a calculated field in a query that returns a aging date to an invoice. I want to take that aging date and apply it to a multiple If statement. I tried a joining field, but it's not working. A simple multiple If statement should do the trick though.
If AR is: 0-10 Then return: "Current AR"
If AR is: 11-40 Then return: "001-030"
If AR is: 41-70 Then return: "061-090"
There are more, but I can figure that part out once these are solved. Any help would be appreciated.
I'm trying to create a report that does the following:
If the term "Other" is selected in the Time1 field, then the Time1 field will not be visible, but the field Other1 field will be visible and if the term "Other" is not selected in Time1 field, then the Time1 field will be visible and the Other1 field will not be. This is what I have for VBA code, but it is not working.
If Not IsNull(Me.Time1) Then If Me.Time1 = "Other" Then Me.Time1.Visible = False Else Me.Time1.Visible = True
I am creating a report that has a filter based on 3 separate listboxes. The user has the option of choosing one or more filter criteria from each listbox. The trouble I am having is if the user only chooses one filter, I need to adjust my filter string. This is the code that generates the filter:
I need to get this syntax right. I have something similar that worked before to open a report but now I am using the same code structure on opening a form and I can't get it.
[prikey] is an autonumber and that has given me trouble before with the syntax. [EstimateFlagCleared] and [WarrantyFlagCleared] are Yes/No fields.
Dim maxFlag As String Dim flagCriteriaWarranty As String Dim flagCriteriaEstimate As String
Look at the below SQL 'INSERT INTO' statement ? I'm trying to insert multiple variable values into an 'INSERT INTO' statement. I'm getting the below error message. The code is listed below. I started out with two (2) variables, but will have thirteen to insert into a table. Also, in the code below is the VBA statement to retrieve the variable data. I'm getting the data, but cannot insert the data into the table.
Private Sub Test2_Click() Dim strSQL As String Dim strSalesman As String Dim strContentArea As String DoCmd.SetWarnings False
[Code] ....
Error Microsoft Visual Basic popup Run-time error '3061'
I have a problem that I can't seem to solve in SQL for my access 2010 query.
Let's say I have a the price of and for every year.
In the tables I have A building number, a building type, and electricity and water predictions for this year and many upcoming years (up to 40 years)
I need to apply a change to any building with the building type BRT to show only 10 percent of the electricity and water for ALL years (up to year 2052). So building 5 would show 8.5, 5.4, 9.5, 7.4, and so on.
Following is the one liner Update statement which, works perfectly
strsql = "UPDATE tblCurr SET tblCurr.Currencyname = [forms]![updatecurrency]![txtcurname] WHERE (((tblCurr.Currencycode)=[forms]![updatecurrency]![txtcurcode]));
I am trying to get a Case Statement to evaluate multiple conditions. Example: below when I get diagnosis code 20400 and the age_at_diagnosis is 40 the code is basically ignoring the second condition of the Case "And rs![Age_At_Diag] < 18". How do I get the code to recognize both conditions?
Code:
Private Sub cmd_Update_Conditional_Codes_Click() Dim rs As DAO.Recordset Dim rs2 As DAO.Recordset
I'm trying to construct an SQL crosstab query that will output data like the picture I've attached in the .zip file.
The four variables from the data table would be [Client Accounting].[Marketer] (the left vertical column), [Client Accounting].[Closing Date] (the higher level horizontal column grouped by month), [Client Accounting].[Write Off] and [Client Accounting].[Refund] (the lower level horizontal columns as sums)
The totals column at the bottom and the two vertical columns at the right would be made in the report and wouldn't need to be in the query.
This is what I have so far but I don't know how to add a second TRANSFORM statement to be included and grouped by month!
Code: TRANSFORM Sum([Client Accounting].[Refund]) AS SumOfRefund SELECT [Client Accounting].[Marketer] FROM [Client Accounting] GROUP BY [Client Accounting].[Marketer] PIVOT Format([Closing Date],"mmm") In ("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec");
Now, I know that something in the UPDATE statement does not match my select statement.What should my Update Statement be, in order to update all the columns in the joined tables?
I have a query with the following criteria in one of the fields:
>=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom())
fom is a function for first of the current month. I need this query to be specific to what month it is when its ran so i want to only have this criteria if the month is > = october. If it isnt October or greater, i want the criteria to reflect this.
>=DateAdd("m",-12,fom()) And <=fom()
Which also works by itself. But when i add it to an iif statement it always produces no results. Below is the iif statement.
Iif(month(date())>=10, >=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom()),>=DateAdd("m",-12,fom()) And <=fom())
I have also added the column name to each expression and it still doesnt produce any results.
I am creating a multi-search form for a student database, where after I enter my search criteria I hit a "Run Query" command button and then it opens a query form with all of my criteria.So far I can search using last name, first name, and middle name. When I try to search with a start date and end date I am have issues.The start date and end date is for the class date. In the query form under the field, class date, for criteria I wrote:
Between IIf([Forms]![Search Form]![Start Date]="",1/1/10,[Forms]![Search Form]![Start Date]) And IIf([Forms]![Search Form]![End Date]="",4/25/15,[Forms]![Search Form]![End Date])
I want it when I write a date in the start date and end date I want it to give me a list of all the students who took the course between those dates. Also, if I leave the dates blank I want it to search all dates. The dates 1/1/10 and 4/25/15 are just the dates I gave because that is far back as my database goes.
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine:
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Excel workbooks would take names from the "Div" field and the tab names would come from the "Tab" field in the Access table. First need to find workbook name (Div - Field) then the look for each sheet name (Tab - Field) to create 1st Excel workbook with all the sheets (Tab) and repeat the process. I think you need to approach of read the Access table one record at a time keying on the "Div" and "Tab" fields in creating each Excel workbook with the associated multiple tabs (sheets) that are written to a common folder.
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine.
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long Dim objExcel As Object, objWorkbook As Object Dim colWorksheets As Collection
I want to create a form that allows users to update multiple fields for multiple assets. Below is what I came up with:
Ideally, I'd like the subform to be filled in by having the user select multiple Assets from the S/N combobox field which would then auto-populate the "Type" field. Then they would fill out the appropriate fields they want edited in the top part of the form. They hit save and magic happens. This would also be nice because only assets they want edited would be displayed (easier on the eyes) and no distinguishing would be necessary. To do it this way, I know I would need to use a temp table but I wanna avoid using temp tables.
I know I can do this by adding a Yes/No field in the "Asset" table, setting the "Asset" table as the subform's recordsource, and then putting a checkbox in the subform and allowing them to check the assets that they want to edit (which would also allow me to sort it instantly so that checked Assets are at the top of the datasheet for easy viewing), but I would like to know if there's a way of accomplishing this without the use of checkboxes.
I know I could also use a listbox and that allows them to multi-select items, but I'm not sure if that allows me to group all selected items at the top of the listbox for easy viewing of selected items. Plus it would involve a lot of scrolling (there are over 2k assets).
I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles() Dim fd As Object Dim strFilter As String Dim lngItems As Long
Const msoFileDialogOpen As Long = 3 Const msoFileDialogViewDetails As Long = 2
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
