Is It Possible To Automatically Set The Report Page Margins (top, Buttom,left, Right)
Aug 19, 2007IS IT POSSIBLE TO AUTOMATICALLY SET THE REPORT PAGE MARGINS (TOP, BUTTOM,LEFT, RIGHT) at the Report Open event?
View Replies
ADVERTISEMENT
Reports :: Different Report Margins On First Page?
Dec 30, 2013I'm using Access 2003.
Is it possible to set the top margin on the first page of an Access report different from all the other pages?
!@#$ Page Margins ...
Mar 27, 2006I have an Access 97 reporting DB.
On all other systems these reports print out fine.
I just set up this reporting system on a new computer and when I print, the reports print on two pages - second page had a tid bit of an order date.
On the other systems, all the page margins ( top, bottom, left & right ) are set to .25" and the column width is set to 8".
I also receive this message upon running the report:
The section width is greater then the page width, and there are no items in the additional space, so some pages may be blank.
If I manually move this Order Date field over it does not properly print in the Order Date box on the form fed document.
This report is printed to a OKI Microline 320 Turbo 9 pin dot matrix printer.
All my margins are at .25" EXCEPT for the right margin, which is at .416" ... WHICH I AM UNABLE TO CHANGE!! Why?
I have reinstalled the proper drivers for this printer and have up to Office SR-2 installed.
Why am I unable to change the right margin to .25", if all the other systems have this setting?
Any suggestions are muchly appreciated, as I am seriously frustrated with this situation .... if I have left out any pertinent info .. please send your questions my way ....
Cheers!
QT
Can You Automatically Set A Forms's Margins In A2k.
Jan 19, 2006I want to print a page with .5 magin instead of the typical 1 inch. I am using access 2000, so i can not use printer.leftmargin. Is there a way i can do this through code somehow instead of going into page setup on each users computer? If the page margin is set to larger than 1" it will print on 2 pages.
Anyone have any suggestions on whare to start? All i can find is how to adjust page margins in a report. Or with a later version of access.
Modules & VBA :: Formatting Page Layout (Margins / Orientation)
Mar 21, 2014I have the following code in a module to set certain formatting properties when exporting an Access 2010 query to Excel:
With xlApp
.Application.Sheets("Spoilage").Select
.Application.Cells.Select
.Application.Selection.ClearFormats
.Application.Range("A1:K1").Select
.Application.Selection.Font.Bold = True
[code]....
This works perfect but now I need to set some of the page layout properties (margins, orientation, etc.)
I have tried adding this:
With ActiveSheet.PageSetup
.LeftMargin = Application.InchesToPoints(0.5)
.RightMargin = Application.InchesToPoints(0.5)
.TopMargin = Application.InchesToPoints(0.75)
.BottomMargin = Application.InchesToPoints(0.75)
.Orientation = xlPortrait
.PaperSize = xlPaperA4
End With
But I get a complie error (Method or data member not found) on the .InchesToPoints part of the line.
But I get a complie error (Method or data member not found) on the .InchesToPoints part of the line.
How To Continue A Form Page After Page Automatically
Jul 9, 2005to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Report Margins (Print Position)
Feb 6, 2008Good morning all.
I have an annoyance!!! I have a few reports in the access database that I'd like to hard code the print margins so that when I send any database updates to users that have different printers, the margins all come out the same. So that I don't have to then go to each computer I've updated the database on, to open each report and reset the correct print margins.
Another annoyance - along the same lines: A report that previews correctly several times and then - for no reason, previews with larger margins and, hence, data is lost off the right.
Any suggestions would be appreciated.
Thanks
Martin
Reports :: Can Report / Printer Margins Be Changed At Runtime
Nov 10, 2013Access 2007 RUNTIME.I have 2 different printers, 1 for invoices A5 & one for general use A4.
I use
[URL]
and can change printers & some stuff but can't change margins.
Is there a way to change these margins via VBA that can be set in RUNTIME.
Like now, I have just had thousands of invoices pre-printed layout but the company managed to move the margin 5mm over so I have to program my MDB reports to reflect that.
Reports :: One Page Report Showing Second Blank Page
Apr 20, 2014I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedReports :: Report To Rtf- Right To Left Formatting?
Dec 3, 2014A client wants to convert a report I designed for him, to a word document so he can edit it.
The report's Report.Orientation Property is set to 1 - Right-to-Left
Relevant TextBox.ReadingOrder Properties set to 2 - Right-to-Left,
and relevant TextBox.TextAlign Properties are set to 3 - Right
When exported to RTF, the document is LTR and text alignment is to the left (even though the page actual layout is seems RTL, just like the report).
Is there a way to enforce RTL layout in the exported Word file?
I am using Acc2010.
Edit: Iv'e added a sample word file. You can see it looks RTL, but is actually LTR. Set it as RTL - and it gets all disordered. Now multiply this by 47 pages...
Sub Report - Data Stops Appearing In Sub Report After Page 2?
Dec 21, 2012I have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
View 13 Replies View RelatedFit Report To A Page
Sep 10, 2006I have created a report however, given the number of records it prints over 2 pages. isthere a "fit to page" option in access???
View 1 Replies View RelatedSub Report At Last Page?
Oct 18, 2006Hi,
Question: I have got one report showing the details and one report showing the totals of these details. How do I combine this to one report showing the totals at the end of the details, ie. not on every page?
Many thanks and regards,
Gurkie
Report To Fit Page
Jun 9, 2007I am trying (an failing) to create a report which best fits into A4 size paper. Requirement is border all arround.
I am attaching a sample report output of my db in which
See, Additional Techno-Commercial and below data are in Report footer. So problem is if there is single result in details above footer, then this footer comes up and report covers only half of page.
What is required is footer should be a fixed lower position and if data above is less it should be blank but a border should be there.
I tried forum search also but found no thread.
Please help
How To Set Margins In Combo Box
May 4, 2005I have set individual margins inside text boxes in my app.
I want to set some white space inside the combo boxes, too, but that option isn't available in properties.
Is there a straightforward way to set inside margins on combo boxes?
Thanks in advance!
I Keep Losing My Margins
Aug 18, 2006Hi Everyone
I wonder if anyone can help me please.
I have a form that nearly fills an a4 sheet of paper when printed. For this reason I have to set the margins from 24.99 down to 5.
This is ok and the form works well and prints out properly about 75% of the time. Occasionaly when I open the form it has reverted back to the 24.99 margins which of course prints out on three sheets of paper and is all over the place.
Is ther a way to set the margins on load and can anyone suggest an appropriate bit of code.
Kindest regards
Tony
Page Setup In Report
Jun 1, 2005Hi
I have created some reports but find difficult to keep permanganate page set up for that reports. I go to design view and do page setup with required margin and Portrait or Landscape set up and preview that reports looks fine. After saving again I check still its fine but once I close that database and reopen again some of reports page setup becomes Portrait with 1" margin on all sides (Not All reports). I cannot solve this. Can any one help??
Funny part is even I copy that report and change data source of that report it changes page setup
:confused:
Report Footer On Last Page Only
Mar 11, 2005I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Jabez
Viewing A Report From An Access Page (web)
Dec 4, 2006Viewing a report from an Access Webpage... I can not, unlike from a form, create a button to view a report. Is there anyway around this? Is there no functionality to display the report as an html page or so?
Sam W.
Adding Page Breaks To A Report???
Aug 16, 2007I have a list of jobs for a report in which there are multiple jobs per page. When there is a page break in the report some jobs are being cut off and then started on the next page. I do not want any information from a job to be seperated by a page break. I just want a page break to occur after a full job listing. I don't mind if the page is short, just don't want any jobs broken up. Is there a way to accomplish this??? Thanks.
View 3 Replies View RelatedReport Page Setup Keeps Changing
Jan 3, 2006I have several reports in my system. Some are landscape and some are portrait. Occasionally the landcape ones switch to portrait taking up two pages each. In preview mode it is not so bad that the user can reset the page size, but when one is sent to print this is most certainly annoying.
Any advice?
Page Breaks In Sub Report Not Working ?
Dec 15, 2004Hi,
I have a report that has 3 sub reports in the main report but for now I will just concentrate on my main report and my first sub report. My first subreport is a bit of a nightmare as it pages and pages of just text well 3 pages. I have typed all the text in labels n the sub report and I have inserted a page break control when I run the sub report without the main report the page breaks are there when I run the sub report from the main report the breaks have gone. Any idea's how to fix this one. So I have a hughe details section with 3 page breaks that only work on the sub report that has not been opened from the main report. Once I try to open the sub report from the main report I lose my page breaks in the details section of the sub report. Hope this make sense. Thanks PWF
Report: Formatting To Fit 1/3 Page Three Times
Aug 18, 2006I need to print data on a pre-printed letter-sized piece of paper that will be cut horizontally into three identical 8.5" x 3.667" forms.
For the life of me, I cannot figure out how to format a report to get the data in the right spots. I've tried messing with the margins, height of the detail area, columns...everything I can think of. It seems I can get the data to print in the right spot on the top form but neither of the other forms and/or on the top two but not on the bottom at all.
There *must* be a way to do this.
Prinitng More Than One Record Per Page Of Report
Oct 30, 2007I have a report detailing a summary of a patient's medical history however it is printing one patient per page whereas there is plenty of room to print multiple records per page.
I the report set to sort on surnames but have changed all the sorting and grouping criteria as far as I can see.
How can i do this?
Reports :: How To Keep All Yes / No Fields In Report On Same Page
Sep 4, 2013I have a few fields "yes/no" in report and I want to keep all of this in one page when I'll print it. How could I do that.
View 7 Replies View RelatedReports :: Centering Report On Page?
Nov 14, 2013I'm using Access 2010.My reports are all crowding the left margin, with the reports printed in Landscape being the worst.My Page Setup shows Top and Bottom margins are 0.2 inches, Left is 0.35 and Right is 0.213.
Paper size is 8.5 x 11, in Landscape Mode.
1 column.
Column is 10.4"
I'm getting that error that says that the report is wider than the paper so I may get blank pages, but I don't. It just prints the 6 pages of the report.The Report Property Sheet says the report is 10.5104" and I cannot for the life of me get that to change.
When it prints, there is absolutely no margin on the left side (in landscape mode). When the report renders on the screen, it appears to be perfectly aligned.Reports printed in Portrait mode have extra white space at the top, with the footer being printed right along the bottom edge of the paper.