Is it possible to fully flash (Clear) the MS Access application window title bar?
I mean to let it appear fully empty without the "MS Access" and the Access logo, the key.
I made it but I wasnt able to remove the MS Access logo, the key from the title bar
Thanks,
Access 2003
I have a rather complex form with an ODBC connection to data that takes some time to load.
The Form has a continuous subform I am using in place of a listbox to select records (I need more functionality than a listbox)
The Form's Record Source is a query
When the form opens, I does so in pieces as it populates
I'd like to either keep the form hidden until it completely loads
I have tried using a timer event to not show a form until it is fully loaded, to no avail.
Code:
If CurrentProject.AllForms("FONNewEdit").IsLoaded = True Then
Me.Visible = True
Me.TimerInterval = 0
End If
I have tried using the onload, onopen but the form still displays before being fully loaded.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedHello i want to use as a front end as i can create better forms etc... i want the end user to enter information into a form in Flash and then it automatically updates the access back end? is there a simple way of doing this??
View 2 Replies View RelatedI would like to juice up a form with a little animation (logo).
I tried embedding a Flash movie, but it will only run in a seperate window, and that's clearly not what I want.
Placing an animated GIF in a form doesn't move a bit.
Any ideas?
how can I make a textbox flash when a certain time has been reached such as a delivery time textbox...so if delTime is set to 11:00am and you want its textbox to flash if delTime is 9:00am.
View 1 Replies View Relatedcan I use macromedia flash file to be place as image on Ms Access form?..coz I'm planning to use an moving image on my access form..any suggestions?..
thanks
Ben
hi
I'm trying to search s specific vlaue from an access database.
The problem starts when i have multiple resolts...
I managed to send the query from flash and get 1 resolt, but how can i get multiple ???
please help!
ohad
ohad_m@yahoo.com
I've created a form with a (simple) Flash animation on it, but it runs very choppy.
But when a message box is active, it runs perfect.
It seems that when the focus is off the form, it works fine, but otherwise, it doesn't.
Any ideas?
:confused:
I have a formula box in my form (textbox) called InventLeft that would calculate product in my inventory. I'd like to make this box flash if the result in it is Less than 2..This way it would catch attention to my user to order more product..Is this possible? Thanks in advance..
View 5 Replies View RelatedHey.
My database would like, to make itself feel complete, a rele snazzy opening form.
I have flash 8 and I've created a 1024x768 movie with some simple animation on it.
I've managed to add the movie to the database as a ActiveX flash object and the animations play.
The problem is making the object larger! It's staying very small no matter how I change the properties of the control.
Any help would be much appreciated. For the sake of my databases mental health... of course. :cool:
To attach the movie I did so:
http://www.databasedev.co.uk/flash_movie.html
JoeyTheBean
I'm working on a series of forms for a company that I'm currently employed at, and on one of them I've made a listbox which will display records which need action in the next 2 weeks.
That's all going fine. However, it it possible to make the items in the listbox flash red? Just so that our external worker REALLY has no excuses!
Just to clarify, I want the text identifying the records (E.g. Name, FinalDate) to flash, but not the headers for the columns in the listbox.
I have a form with one (field1) on it. Where users will enter data.
I would like to have a unbound textbox on the same form that will flash green if the data entered in field1 matches a value in Table. Or flash red if it doesnt find a match.
I tried the conditional formatting but i think my expressions are off.
I. The two issues I am trying to address is to see if there is simple code that can be used to make a command button flash.
II. I need to show in a small pop-up box users that have expired licences. When the main License form is first called to open, I would like a smaller pop up box or preview form to open up(without operators except for the close button). The pop-up box will be based on a query that already exists to show those with expired license. Can the form be similar to the pop-up calendar found in Access already?
Thank you:o :)
I need to create a message box or a form or something to flash on the screen to tell the user that a piece of "Update" code is running. the update code will be updated reports from marketing returns, but the 3 branches who use the information are separate so I am creating an update form to download and update the table.
The code for the update is already working, but can take a while, so I thought a message or splash screen would be useful as the update runs on start up.
It would have another use, I have a report which is made mainly of calculated fields on an onPrint event and also takes a while to work it out, so a similar screen would be more useful than my current spinning circle and blank screen.
I will try to explain what I have, but for a little more information please see the thread where I was trying to get a single instance of this query to run: http://www.access-programmers.co.uk/forums/showthread.php?t=146582
This above thread was to allow users to select a valid month from a "quota" table of data to compile work data for that particular month. The way this all works is I delete a history table, append the data from my work table, and then add the data from a quota table. Each time a user runs this report, those three queries run dependant on the month selected. At the bottom of this report I sum up the columns to give an overall total for production numbers. The table is set up as:
For MMM YY (selected)
Item........Repaired......Quota
widget1........1...............3
widget2........2...............0
widget3........6...............4
widget4........2...............2
Now what I need to be able to do is to retrieve all these totals at once; so that the numbers can be graphed by month. This history table that is built is not perminantly stored; since all the 'data' for it is contained throughout a couple other tables. I didn't see a reason to need to store 'all' that data again since it could be retrieved as needed.
Is it possible to write a query that will run this process for all distinct dates in the quota table and sum the data for repairs and quotas? Something like this:
Date.........Repairs........Quota
MMM YY.......18..............8
MMM YY.......27..............10
MMM YY.......16..............18
Or have I bitten off more than I can chew :)
Hi,
I want to put a value from a field in a table in the Title Bar.
So far i have done (Looking at 2 ways to create, 1 with module below or directly in the form, only just lloking at the module way so is not finished as i am waiting to get it to work directly first):
Module
Option Compare Database
Function ChangeTitle()
Dim dbs As DAO.Database
Dim prp As DAO.Property
Const conPropNotFoundError = 3270
On Error GoTo ErrorHandler
' Return Database variable pointing to current database.
Set dbs = CurrentDb
' Change title bar.
dbs.Properties!AppTitle = "DYSMS " & (SoftwareVersion.tblSoftwareInformation)
' Update title bar on screen.
Application.RefreshTitleBar
Exit Function
ErrorHandler:
If Err.Number = conPropNotFoundError Then
Set prp = dbs.CreateProperty("AppTitle", dbText, _
SoftwareVersion.tblSoftwareInformation)
dbs.Properties.Append prp
Else
MsgBox "Error: " & Err.Number & vbCrLf & Err.Description
End If
Resume Next
End Function
Directly
Does not work
Dim stAppTitle As String
stAppTitle = "DYSMS " & (SoftwareVersion.tblSoftwareInformation)
Me.Caption = stAppTitle
Does work
Dim stAppTitle As String
stAppTitle = "DYSMS " & (Now())
Me.Caption = stAppTitle
So need to declare the SoftwareVersion field i guess??
Thanks
Dan
Hello!
In my form I have the title of a CD which is under the name of 'CD_Title' which is taken from my CD's table and I was wondering how to show it up in a Label so when I flick through the albums the Label changes to the album that it is selected!
I need to know...please help me!
:(
For Access 2003 - is there a way to stack one word on top of another when you rename a column? So, instead of having two words side by side for a column title, is there a way to put one on top of the other?
For example - change from this "today's date" to "today's
date"
Thanks
This should hopefully be an easy one for somebody:
How can I not display the title of any opened form at the very top of the screen. I would prefer to have the switchboard title remaining visible instead of the form title.
For example I have a form called 'frmPC' so the top of the screen shows 'frmPC : Form' when the form is open.
Anyone?
Much appreciated,
Paul
i have a form, and i would like that on one of the fields, as soon as i type something in it when i leave the field, i want it to automatically convert it to title case. can this be done please?
Cheers
I know that you can change the title of your application in the startup options in Access.
But can it also be done by vba code at runtime?
I have an *.mdb file with a bunch of tables, queries, forms, macro's etc. The file is named "xxx" but the display in the top left hand corner of the access window (next to the red key) is "yyy". I've looked everywhere and can't seem to find where this information is stored - as I need to change the "yyy" to match the filename "xxx" (the *.mdb was originally used for something else). Anyone know where this info is stored or how to change it?
Thanks in advance to those who respond!
This is the table:
ID | Item | 2/2/07 | 3/2/07 | 5/3/07 | 7/3/07
---------------------------------------------------------
101Tap10152010
102Ply25201010
Note that 2/2/07 till 7/3/07 are field names having purchase quantity.
Now I want the query to show something like this:
ID Item <----Feb------> <-----Mar------>
2/2/07 | 3/2/07 | 5/3/07 | 7/3/07
---------------------------------------------------------
101Tap10152010
102Ply25201010
I want the two columns 2/2/07 & 3/2/07 to be combined under one field name 'Feb'. Similarly for 'Mar', combine 5/3/07 & 7/3/07.
Open attachments to have a clearer picture.
Please help me out over here.
I have a cross_tab query, that users print on a monthly basis.
The user selects whether they want to include data for one or all of three products. So the query could show data for example for Salmon only.
I need to be able to show on the printed query, what products it is displaying for. At the moment the query is called "TotalxProccessor_Product". Once the query is printed there is no way to tell if it is for Mussels, Salmon, Oysters or all three products.
Is there an easy way to manipulate the title the query prints our with?
Or do I have to go through a report to have control?