Hi, all
I have written some codes to insert data into a table. I'm trying to get rid of the pop up message which say:
You are about to append one row(s).
Once you click yes, you can't use the undo command to reverse the changes.
Are you sure you want to append the selected rows?
Can anyone tell me how to do this?
Cheers
Hello, I used a commond button to run a query in a form. This is an append query that appends the new setups in the form to a table. However, every time I click the button, a message come out: You are about to run an append query that will modify data in your table.
Since this is a form application, I do not want this message come out when I click the button. Can anyone tell me how could I stop this message come out when I click the button.
Thank you.
Hey,
Is it posible to eliminate an append query or update, delete querey message. So that users wouldnt have to click "yes" in a msgbox that show?
THX
Hi,
Is there any way to customize append query confirmation message? Unclicking Confirm Tools-->Options-->Edit/Find-->Confirm-Action Queries disables all warning messages.
My query takes some records from one table and append them to another table. When I run the query, first warning message says "Warning you r about to run an append query that will modify data in your table" (this is the message I do not want to see) and then if OK is clicked, the message says "you are about to append XXX rows...(this is the message I would like to customize)
How can I customize the 2nd message?
regards
Hi everybody,
Beginner here needs help !
I'm building a make-table query for which if the result is null (no record correspond to the set of criterias), a default message like "there was no activity during the period" would appear in the table (not a message box...I need the message in the output table). The best I could think of is an IIF function but it doesn't seem to work... Is there any way to do this without using VBA?
Thanks in advance !
Is there a way to append a pivot table to a table or possibly make a query based on a pivot table? I need to get a count of Part Numbers and I need the average price for all these parts. Additionally I want to ignore a count of less than 3.
Also I am having trouble filtering on the count in the pivot table... haha, so I was gonna Query on it later on.
I am rebuilding an application for a client and I have an Access table that I am using as a temporary table. Once the user is done entering information into the temporary table through a form, the user presses an update button that appends the records using an Append Query in Access to an SQL Server Table.
The following error message occurs:
"ODBC -- insert on a linked table 'linked tblname' failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] Explicit value must be specified for identity column in table 'linked tblname' when IDENTITY INSERT is set to ON. (#545)
I am using a form, subform combination to record a bill with many details. The bill summary is posted into a tbl_TransactionsMain table in SQL Server using the ADO AddNew method. The PK for the tbl_TransactionsMain is then entered into the temporary table in Access. When the temporary table records are appended into tbl_TransactionDetail the error message occurs.
What is also interesting is while typing out this post I thought to test the error by manually trying to run the query. The query worked like a charm! :confused: When the orginal error occurred off of the form I tried to run the query manually and it failed. I am guessing that this might have something to do with the ODBC timeout.
I think SQL Server/ODBC connection is not liking how I have a set of records in an Access table with foreign key numbers assigned when I am attempting to append the records. I am new to SQL Server and any ideas are most appreciated! :)
I have a fairly simple append query that appends two columns of data to another table - all good. Except, the destination table has a field 'ServiceDate' that I would also like to be completed at the same time with today's date. I presume that this is =Date(), but where do I put it to make this happen?
View 2 Replies View RelatedI have two tables, submit and imgdest. Submit is edited by front-end users to load pictures for back-end users who then delete the images when they're done with them. Submit is edited by a form, in the form I've placed a button (Command37) that has code:
Code:
Private Sub Command37_Click()
Call InsertData
MsgBox "Completed", "0", "Completed Backup"
Exit Sub
End Sub
Private Sub InsertData()
[code]....
This code was working for a short while, now anytime it's run I get error 3027 - Cannot update. Database or object is read-only. However, I can open the linked table and manually change information in it with no problems.
Hi,
I have a field in one table that needs the sum from fields in another table.
How do I go about doing that?
Thanks,
Trena
I have a database with existing tables.I now want to add a whole bunch of records into my access tables.A lot of the data is repeated, and lends itself to my doing it in excel with it's better copy and paste abilities, and it's ability to easily increment alphanumeric fields.I can't seem to succeed in append importing to the bottom of my access table from my excel spreadsheet. All columns are the same.Can this be done, and if so how please?I'm on XP Pro with Office 2003 Pro.I'm also very much a newbie in Access.
View 2 Replies View RelatedI have a form with a listbox that displays the name of a table. Once the listbox item is selected, the table name is set to a variable called myFile. I want append the records from the table (myFile) into another table.
View 1 Replies View Relatedhow I could run an append query from table A to table B that only appends data that is not in table B.I want the primary keys of A to be exactly the same as B, because I will use B as a blank slate (another append query to append info to another table C with all the fields as 0 except for the primary key).
For example,
Table A - Supplier
Table B - Things that supplier does (blank)
Table C - Things that supplier does (information)
Lets say table A has 1,2,3,4 for supplier.Table B has 1, 2, 3, 4, as primary keys as well but all the other fields are zero.I insert PK "5" + data into table A through a data entry form, and then when I click on "save" in the data entry form, I want to macro an append/update qry (I don't know which one is supposed to be used in this instance) that will insert PK-5 into table B, so that I can append the blank slate info into table C.
I am attempting to append 2 fields from one table and one record to another table. I have been using DLast("field","table") in an append query to get this done. However, it blows up occasionally and points to the wrong record.
How does one easily and reliably select the right record to use for an append?
I use a query daily that appends records to a table. I used it this morning but now it will not append records. It is odd because when I switch from design view to results my records are there but when I run it the records do not populate. I am not getting a pop-up message like usual either. It appears as if my access 2003 has disabled that function, which I can;t even find to turn back on. Any suggestions?? Thanks.
View 3 Replies View RelatedHi, does anyone know how to create a query/or form that promts the user with a message box that says "enter table name", from this if the user types "A" then table A will be opened for the user to add data into or if the user types in "B" then table B will be opened for the user to add data into. Ideally I would like a form that opens (either form a or form b) that allows the user to enter the details into the corresponding table (a or b)
Tables A & B are both emty to start of with. The field names in both tables are: user_id, firstname, lastname, date
Please help?
how to add records to an access table using code?
View 1 Replies View RelatedI want to append records that I have created in Table1, via a form (Form1), to Table2, using Form1's OnClose event. (Table2 will be amended later, but I need to preserve Table1). Is there a way to append only the records from Table1 that haven't been previously appended to Table2? Also, can I turn off the warning messages in an append query? TIA
View 9 Replies View RelatedHi.
I have a form with two text boxes, call them FIRSTNO and LASTNO.
The user inputs a first and last number into these boxes, and what I want to do is append to table NOS all integers between these two.
E.g. user inputs 6 and 11 and I would like table NOS to contain 6 rows, with the first field containing this number, like so:
6
7
8
9
10
11
It sounds easy, but I’m struggling!
Any thoughts appreciated. Thanks in advance.
I have form linked to table 1. The form has a few control buttons that change certain fields. I am trying to make one of these controls also append a new record to table 2. Table 2 only contains three fields. One of them will have the ID number of the main record, the second field will have the date at the time the button was clicked, and the third will have the contents of a text field copied to it. I understand this is going to possibly create duplicates, but that's exactly what I want in this case.
My problem is; I don't have a dang clue what I'm doing!
I've tried the INSERT INTO stuff, and I tried to make an append query etc. but I just don't know what I'm doing because this is the first time i've ever had to do this.
I have created an append query. Inside that query I have one column that take a result from another query and I have about 10 columns that follow that one column by infomation from a table. I do have the query and table "join properties" at "Student-ID".
I am appending to a blank table but its not putting any other information into the table. The only time it appends if there is information in there. Is there a way to append to table with no records?
The problem is the following...
I have 3 tables:
1) an Invoice table
2) a table with all kinds of material (approx. 10k rows)
3) a junction table with Invoice_ID and Material_ID
Now, I start the process in my Invoice Form. I have a button there to open a Material form, where I can lookup the Material_ID that I want to add to my invoice form.But I can't seem to find out how, once I select the record I need (with the Material_ID on the row), how I can append this to my junction table.The open Invoice form has the Invoice_ID and the active row in my Material form has the Material_ID, but how do I proceed?
I want to punch data in form and i want to append data to table and i want to automatically show new record when i reopen the form Now i face a problem that when i reopen form record show 1st table row.
View 4 Replies View Relatedaccess where in on clicking a button on an access form, I can insert Field A, B & C (all containing email ID's) in to a new mail message in outlook. Similarly I have a subject field which needs to go into the new message as subject.
I enter data into the table using the form where the button needs to exist.
I have a temporary table within my access database. I have a macro button that makes the table (thus deleting the old one in the process) and then appends information from three other queries to it.I want to stop the standard warning message from coming up. The message I get is below. I have already cleared the action queries check box so the warnings for the making table (if no previous table exists) query and appending data query have disappeared. However the below message still pops up when the make table query begins to try and delete the old table. How I can make it go away?
"The query you are about to run is a make-table query. Unlike most queries that displays data in Datasheet view, a make-table query creates a table and copies specific records from one or more tables and queries. If the table already exists, the query will replace the structure and contents of the table.If your intention is to create or replace a table, click Yes. To avoid being prompted when you run such queries, click the File tab, then click Options. In the Access Options dialog box, click Client Settings. Under Editing, clear the Action queries check box.
Hi, I'm fairly new with working with Access and programming in VBA, and I was looking for some help. I have a database with many tables, and relationships between the tables. In particular, I export two of these tables to text files from one machine and need to import them back into the database on another machine. I have this working if I delete all the records before useing the transfertext command to import that table. But my problem is that I need to either append a record if it doesn't exist in the promary keys, or if the new record exists in a primary key, I need to replace it. I was thinking about reading the table to a temp table from the text file and checking each record in some sort of query to see if it needs to be appended or replaced in the table. Does anyone have any ideas of how else this could be accomplished a little easier that looping through each record, for this might take a while, as I do not know how many records can be importing each time. All I know is that I need a way of taking data from a text file and either appending or replacing the records in the table in the database. I appreciate any help I can get with this. Thank you.
View 3 Replies View Related