Is There Anyway To Reverse Splitting A Database?

Sep 14, 2005

I split a database and created a backend but now I dont need it and I accidentally deleted the backend while I was updating the file folder and it was on the network so it's gone for good.

Is there a way to reverse splitting a database so it no longer requires the back end?

View Replies


ADVERTISEMENT

Splitting A Database

Aug 11, 2005

I am trying to split my database but when i run the database splitter it comes up with the following error messages:

Subscript out of range

And

Invalid procedure call or arguement

Does anyone have any ideas what could be causing these or how to fix it?

Thanks

View 11 Replies View Related

Database Splitting

Sep 10, 2005

Hi
How can I change the location of the back end part, at the moment the front end is looking for the back end at a different location

Cheers
Bikeboardsurf

View 1 Replies View Related

Splitting A Database

Aug 21, 2006

Hi,

I have been searching for more info on this and found out quite a lot about it; however, I am still wondering how to connect the front ends that will be in different machines to the back end that resides on server.

I know that when you split a database, the wizard asks where to save the first front end. But how about if you have many?

Any help will be very much appreciated.

B

View 3 Replies View Related

Splitting The Database

Mar 14, 2007

i thank all for helping with the issue of mulitple users. after i did the splitthe database using the wizard. i noticed the tables lookes diiferent. but how do i put the front ends for users in their document since am on a thin client enviromemt. or
how do i transfer the front from the end. do i have to write codes??
thanks

View 5 Replies View Related

Splitting A Database

Jun 21, 2007

Hi. I would like to split my database which is used by various people on a shared drive.

Is it possible to specify a relative path to the linked tables in the back end?

Otherwise, if people access the shared drive via different drive letters, it fails.

Also, I like to keep a copy of the database myself. With absolute paths to the back end tables, I can't simply copy both sections from one place to another - as the links fail.

Thanks.

View 6 Replies View Related

Splitting A Database

Apr 1, 2005

I recently decided to split my database into a front end/back end environment. What I noticed though was a huge slow down in performance. One subform in particular takes 5-8 seconds to load, as opposed to less than a second before the split.

I know that splitting the database comes highly recommended in this forum, but the slowness is unacceptable. I especially want to split the database so I can execute changes quicker.

By the way, I have read several threads that recommend turning off the name autocorrect feature. I did this in the front and back end but did not notice a diference. I also compact/repair the database regularly.

The other thing I tried was creating an MDE file, as I was told they run quicker. Unfortunately, I am told by Access that it cannot be created. I believe from what I have read that I have too many forms that have attached modules.

For now, I am going to merge the database back into one file. But if anyone could offer some advise, I would like to pursue a split again.

View 2 Replies View Related

Reasons For Splitting A Database

Sep 1, 2007

I have a split database - frontend and back end sitting on a server. If there are only going to be absolute maximum 4 people using this database at a time - is there any good reason for it to remain split.

The reason I ask is that a few people may want to "take it home" to work on it and being non-computer savvy people have a lot of trouble re the concept of linking the front end to the back end.

How do you unsplit a database?

View 3 Replies View Related

General :: Splitting Database In 3

Sep 2, 2012

I have a database (already splitted in FE/BE) which Clients use on site.Part of the service we offer is Outsourcing: We do all the capturing and when they login on their side, it downloads the latest BE file for them to use "Read-Only".

However we added a new module in which half of the data on a particular table needs to be completed by the Client.So we need for the table to be splitted in such a way that they can capture their info on the form and when we log in on our side, it has to download the data they entered in the same way as when they login and download the data we captured.

Was thinking about adding a 3rd database file to the mix with just one table and in some way link that table to the existing table for the new module. But the intermediate link I created is not updateble.

View 6 Replies View Related

Error When Splitting Database?

Sep 29, 2011

I've recently downloaded the Goods template database from Microsoft [URL]. It's basically a inventory, invoice, purchase order system and is enough to fulfill my office needs. However, I seem to be running into an issue when I'm trying to split the database using the built in tool.

The "the database cannot be opened because vba project contained in it cannot be read..." error pops up when I click on "Access Database" button in an attempt to split the database. I also tried to do it manually, but noticed that none of the queries and most of the forms don't show up on the list when I'm trying to import queries, forms, etc.

View 1 Replies View Related

If Splitting A Database Isn't Possible? (And Some Other Basic Questions).

Jan 21, 2007

Hello.

I have spent the last couple of hours looking through the forums but have managed to get myself really confused. Lots of questions, sorry - if anyone can point me in the right direction with one or two of them, I would be hugely grateful!

I have a database in a shared folder on the network at work. It is due to start being used by users other than myself in future weeks, and I see here that it's sensible to split things into a FE and a BE.

1. My initial problem is that I have a nagging memory of being told that we're not supposed to save anything on the individual computers hard drives. Can a split leave both the BE and the various copies of the FE on the shared drive, or does this negate the reasons for splitting in the first place?

2. Additionally, with little space left on the shared drive itself, it's possible we'll not have the room to put 10+ copies of the FE on it anyway. If I just split the database into the BE and ONE copy of the FE which everyone accesses, will the BE at least be made more secure by the split, even if the FE is still vulnerable, and performance isn't improved?

3. If no sort of split is possible, are there any alternatives to splitting?

Lastly, some questions for if we ARE able to split and put the FE on each computer:

(I would be keeping the BE and the "master" version of the FE on the shared drive. All tables in the BE and queries, reports and forms for the "user interface" in the FE. Hopefully this is roughly what I'm supposed to do).

4. With a split database, what happens with compacting? Presumably the BE of the database can be compacted as normal, but what happens with all the versions of the FE? Does each user have to be responsible for compacting them individually? Does an FE even need compacting if the design is unchanged?

5. Does splitting affect what happens if two people either open or amend a record at the same time, or is that still just governed by the record locks setting in Tools (which would need to be set before splitting presumably)?

6. If the design of the FE changes (but none of the underlying tables, queries etc. are touched), do I just give each user a copy of the new version, or does something more complicated have to happen (ie. does the whole splitting process have to take place again)? What about if new tables are added to the BE, or if existing tables / queries are amended? Can I just issue amended versions of the FE that interacts with the new tables as needed?

7. I have drop down lists and combo boxs in the forms in the FE that use tables to populate them. Will it cause problems that these tables are in the BE - such as impractical amounts of time before combo boxs show their options? (The table has to be in the BE (I think?) because the user updates the content of these tables / combo boxs through one of the other forms in the FE)

Many, many, many thanks if anyone can help me out with any of these.

View 10 Replies View Related

General :: Database Splitting Error

Dec 19, 2013

I split a database (without first making a copy of it) on my local machine and put the front end on a shared network drive. now no one can open any of the forms since the back end is on my machine.

is there a way to undo this or to split the database on the network drive so that users can get in?

i want to avoid having to redo the database from the ground up.

View 5 Replies View Related

Splitting Database And Use Runtime For Accessibility

Nov 24, 2014

I'm in the middle of developing a database for our engineering group to track projects. I've got a question:

I'm using Runtime because none of our group has MS Access loaded on their system. So, I'm providing a link to the participant to download the free Runtime Software and providing a Shortcut to the database in the shared area.

My question is, when I split the database and provide the users with the front end do they still require runtime? Do I still provide them the link to download the free Runtime software and if so, do I save both the back and front end with the .accdr extension? I'm assuming that since they will have the front end on their systems individually they will no longer require the Shortcut.

The way the system is currently, it seems that only one user is permitted in the database at a time as it is locked out. I would like for more than one user to be able to access the database at a time. I've set the Default Open Mode to Shared so I'm not sure why it gets locked down when a user is accessing it.

View 2 Replies View Related

After Database Splitting, Is It Possible Zo Send A Tabel Into Backend.

Oct 6, 2004

Hallo everybody
I have an Access databse in which I have devided the tables into backend and frontend by using the Database Splitter wizard.
Then if I create any tables in the frontend Access file then thease tables are visible only in the front end of this system , not from other systems if I put the back end in network.
its ok for some tables , but now I have a table which I have to put in the shared backend , but if I cerate in the front end it is visible only in front end and if I create in backend it is visible only in backend.
how to send a table in the front end to backend after database splitting is over, so that I can access this table from other systems.
if it is possible please help me.
Thank you.
Kiran

View 2 Replies View Related

General :: Error When Splitting Access Database

Feb 15, 2013

I have created a db for a nonprofit counseling org. I had created the first half, mostly administrative tasks, called Phase1, and put the BE on a network drive and the FE on multiple users. Now in developing the clinical portion, Phase2, I linked to four of the tables in Phase1 BE file.

Now I tried to split Phase2 the same way as Phase1 and got an error "Subscript out of Range". I think because of already having some external links in it. I checked for the file and Access actually created the BE file for the new phase2, all of the tables are in it minus the four I was linking to. But, access didn't create a FE file. The original still has all of the objects, tables and forms etc. My question is; can I link to the tables in the new BE file even though those tables still exist in the original file?

View 4 Replies View Related

Forms :: Refresh Data When Splitting Database

Apr 7, 2013

In the database I have a main form with subform "frmitinerer" . Using a button on the main form open form "frmrelation." After entering the new daily haul and closing forms refresh the data in the subform "frmitinerer."Code on the button is on click event

Code:
Docmd.openform "frmrelation" acnormal
Me.frmitinerer.requery

All work nice, but when I splitting the database refresh subform not working.

View 4 Replies View Related

Splitting Database - Index Or Primary Key Cannot Contain A Null Value

Mar 6, 2014

I've inherited a rather messy database which and I need to split it in order for us all to be able to enter data at the same time without problems however I get the following message..Index or primary key cannot contain a Null value..It happens at the table that contains the majority of the data (typical) but I cannot understand what could be causing it. I've check Null Primary Key field and removed all of the "required" statuses out of the fields but still no luck.

I tested on a backup database from a couple of days ago and it worked. Only difference is I've added a few bits and bobs since then and 1 field in the table it's stalling on but this field doesn't contain any null values either and I've tried deleting that field in my test database but made no difference.

View 9 Replies View Related

Import CSV File From Database PRO To Access: Unusual Record Splitting Problem

Jul 19, 2006

Hello everyone,

I'm trying to import data from our current Database Pro v1.0 DB to an Access DB that I'm creating.

Our DBPRO is essentially a flat-file data entry program. It has a "subform" for history events that isn't actually in it's own table, but all concatenated in a single [History] field.

Basically, when viewed in DBPRO, it's broken into different records, yet it's actually stored as one. DBPRO uses °, ±, □, and 0's to separate the different "fields", but Access can't seem to break it down automatically.

When I export the data to a CSV file, everything else comes through with minimal problems. The [History] field, of course, comes in as a huge block of concatenated records.

I've attached an example of this below. I included only the field in question, ([History]), and the primary key, ([Last Name/Cust]). The first tab in my example is a single record, recently imported. The second tab shows how I need it to be, broken into multiple records.

Is there anyway I can split these records, while maintaining the primary key? It's my goal to have all the other information in one table, and the history records in a separate one.

Thanks so much for your help! I've researched all over, and just can't seem to find a similar problem, or solution. :(

Ben Bolduc

View 9 Replies View Related

Splitting Access Database - Upload Back End Portion To SharePoint Site

May 12, 2015

I am attempting to split my Access Database and will upload the back-end portion to a SharePoint site. No matter what I do, I continue to get a "Not a valid file name" error.

View 1 Replies View Related

Reverse One-to-many Query?

Oct 14, 2005

I have a one-to-many-relationship set up. Now I need to jam each related many into one field in a new table to make it like a list. Is there an easy way to do this?

View 4 Replies View Related

Reverse Engineering!!!

Sep 21, 2005

Hi

Im working on an Access Database at work. It records the training undertaken by NHS clinical, managerial and admin staff in Brighton. It is used also to generate invoices etc.

I have a better knowledge of access than anyone else here (outside of IT department obviously) so I have been asked to get rid of some glitches and add some functions.

A big hurdle I have found is this:

I can very easily for example, add a command button to open a form, run a query etc, using the wizard.

However I am trying to ascertain what some particular command buttons actually DO. Am I right in thinking there is no way of "reverse engineering" using the Wizard or similar? Because the only thing I can find is Properties > Event > Onclick [eventprocedure] and if you click on build you just get visual basic which I sadly dont understand.

Im not sure if ive made any sense at all. In essence, im saying that making stuff seems easy, but working backwards and dissecting it seems to only result in VB code.

Is there a way around this?

Gazz

View 1 Replies View Related

Reverse Line

Jul 15, 2006

Is there a way to reformat so that the line that is the next line to be entered is at the top instead of the bottom >> I hope that is clear

Also when i use the scroll bar at the bottom at the very end to the right it show grey in the background is there a way to limit it so only what is used is showing


Thx STeve

View 5 Replies View Related

Reverse/mirror Sorting

Nov 8, 2005

i have a lists of emails+domain names eg camae@yahoo.com. im trying to sort them in reverse order but "reverse" seems not working in access. anyone knows how to do them or i was thinking of sorting the list begin with the domain names (which is after the '@') but i dont know how. ive tried using "like "*@[a-d]" but the result displayed is not sorted in alphabetic order. sorry im a beginner. thanks in advance

View 8 Replies View Related

How To Use Stephen Lebans Calendar In 'reverse'?

Feb 8, 2006

Hi.

I've downloaded Stephen Leban's nifty calendar and have it working beautifully to enter in dates and ranges of dates to a fishing schedule table (this is a fishing regulations database). (thanks to RuralGuy for posting the link to this, and other calendars, on another thread)

I have a form for entering some parameters to narrow the results of a select query that shows the start and end dates for individual blocks of consecutive time for each scheduled fishery. (Some fisheries might be scheduled to occur every thursday and friday for a couple of months, or other hard-to-predict ranges of time.)

What I would like to do next is to click a button on the form to make the calendar appear with all the dates where fishing is scheduled to occur (from the query results) be highlighted, or circled (or something equivalent).

My vba 'skills' are not up to tinkering with his class module without some serious assistance. Has anyone tried something similar to this with his calendar? Is it even possible?

I have seen other calendars that do something similar (though I'm still in over my head trying to figure out the modules) but I'd really like to keep with Stephen Leban's calendar since it allows much more felxibility in displaying over various time intervals.

I would greatly appreciate any assistance. Thanks.

View 1 Replies View Related

Combo Box Subform 'Reverse Lookup?'

Jun 9, 2006

I have two tables A and B. There is a 1 to many relationship between A and B. Table A's data is controlled by FormA, Table B's data is controlled by FormB which is a subform on FormA. I already have a combo box for navigation on FormA, however I would also like to be able to have a combo box on FormB (FormA's subform) for navigation, so that when I choose an record from the subforms (FormB) combo box, FormA then jumps to the 1 record from FormA that contains the related record choosen in the SubFormB's combo box (along with the subforms choosen record on the subform) .

Kindalike the combo box on FormA, except it's a 'reverse lookup' if that makes sense. Is this at all possible, does this even make sense? :confused:

_______________
HOLY CRAP BATMAN!!!

View 2 Replies View Related

Queries :: Need Function To Reverse LName / FName

Aug 21, 2014

I have a table with data that is imported from another application. The employee name is showing up as LName, FName. What function can I use to make these FName LName with no comma? I know I may have to do a two step to separate the two then concatanate but not sure how to do it.

UTA: I figured out LName: Trim(Left([ApprovedByFullName],InStr([ApprovedByFullName],",")-1)) to pull the last name minus the comma. How do I pull the first name?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved