I got this message after I install the "SMTPSVG.DLL" that i got from http://www.serverobjects.com/comp/Aspmail3.htm
What should I do?
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x8d8 Thread 0x994 DBC 0x240303c Jet'.
I have two databases that have been split, and both back ends are in a shared folder on the server that only a few people have authorization to access. One of the front ends is accessed off another shared folder, and the other is saved to each person's desktop. They have been up and running for months, and I've had no problems with users not being able to access data from the back end.
The other day, I requested access to this protected folder for four people, which was granted. But, since the time it was granted, neither database will open unless the user has authorization to access the protected folder. They get an error that says the database is already opened exclusively or they don't have authorization to view its data.
I've created another test db and split it into the same folder, but my users are getting the same error.
Any help you can provide would be much appreciated.
Hi, I'm trying to connect to SQL Server Express from MS Access 2003.
I've created an ODBC data source and tested it within the ODBC Wizard. It successfully connects to the SQL Server database.
From within MS Access, I choose File > Get External Data > Import and I'm presented with a dialogue for choosing the data source. As soon as I choose ODBC from the Files of Type drop-list, the dialogue disappears. No error-message, nothing!
When trying to set a password I receive the following message.
You must have the database open for exclusive use to set or remove the database password.
To open the database exclusively, close the database, and then reopen it by clicking the File tab and using the Open command, In the Open dialog box, click the arrow next to the Open button and then select Open Exclusive.
When I follow the instructions, I don't get a dialog box. How do I set a password?
I am trying to open a report (with subreports) from a form. When the report opens, I want the form to hide, which most of the time does. Sometimes, though, it won't hide when the report opens. So, I even created an error handler, and moved that part of the code to SubExit section, but the problem still occasionally occurs. Here is my code:
Code: Dim strWhere As String Dim strDate As String Dim strDist As String On Error GoTo ErrHandler strDate = "=DateSerial(" & Year(Me.txtAsOfDate) & "," & Month(Me.txtAsOfDate) & "," & Day(Me.txtAsOfDate) & ")" strWhere = "YearEnd = " & Year(Me.txtAsOfDate) - 1
I have created a database in Access 2010 and I am not able to open the same database in Access 2007. I have read somewhere that it is possible to open. I get the message, " Unrecognized database format". In Access options, the default file format is, "Access 2007".
Not sure if this is the correct forum but its worth a shot.
When I try to open any database, MS Access will hang if there is already another instance msaccess.exe running. I even tried opening two newly created blank dbs with the same result. Has anyone ever come accross this behavior?
I have tried repairinging/reinstalling/checking and unchecking "Windows in Taskbar option"
I am attempting to create a Macro that will export the COMPLAINT table to an Excel Spreadsheet. However Excel does not open and I am prompted to select the Program I want to use. What am I doing wrong?
I have a VBA program which is stored in an Access database. The program creates letters using Word template documents as well as new Excel sheets. When one of the users in my team undertakes this process she is unable to create the files (although she could before). The following error message occurs initially for the word documents:
"The document could not be registered word 2010. It will not be possible to create links from other documents to the document"
When I enter debug and attempt to run the code again the file opens but subroutine halts again and I get a different message:
"Could not open Macro storage"
The line of code which is identified for both errors is:
Set wdDoc = wdApp.Documents.Open(TemplateLocation)
Where wdDoc is the a Word.Document, wdApp is a Word.Application and TemplateLocation is the path for the template
I have already checked the following:
- 'Trust access to the VBA project object model' in the Trust centre is ticked and Macro Security is set to none. - DCOM Server Process Launcher is set to automatic in Services (Local)
I have an MS Access application which works fine until used with XP OS.
In XP if you open a report which is based on an ODBC linked table and try to send in RTF format as an attachement you get this error message:
MSACCESS.EXE - Unable to locate component This application has failed to start because BJABLR32.dll was not found. Re-installing the application may fix this problem.
The error only occurs for reports using ODBC tables as a data source for which you need to enter an ID and password. Other reports can be sent normally using Outlook etc.
I have tried to create an MDE database and receive the message "Microsoft Access was unable to create an MDE database" I deleted all unnecessary tables, queries, forms and reports and still receive this message.
My database was working fine. Now, if I have to save or edit a record, I get a message Run time error 2107. The value you entered does not meet the validation rule defined for the field or control. I am able to enter and edit new records in the table. I did not change any validation in form. Then it goes to debug mode and highlighted this code (me.recordsource=Listsql - is highlighted)
Private Sub ListSearch_Click() Dim dBS As Database Dim Rst As Recordset Dim Listsql As String Set dBS = CurrentDb() Listsql = "Select * from MasterData where employeeid ='" & [Forms]![MASTERFORM]![ListSearch] & "'"
I'm curious about everyone's opinion of creating an Options table to keep track of things like defaults vs. using the system registry.
Example: For a montly report, I'd like to remember the previous end-date the user picked and use previous end-date+1 as the starting date the next time the user runs the report to make it easier on the user.
Im trying to work on an db in Access 2007 that was migrated from Access 2003 (in fact its been migrated several times starting from Access 97). It executes and runs with no problems in both versions. The problem is when trying to open some queries (not all) - Access is unable to open the query in design mode and gives me this error :
" is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long.
However, as I cant open it - I cant check it. Im pretty sure none of the fields have invalid characters (they do have spaces) and Im not sure how long is too long....
I want to know if possible how to define the structure or function that when you have a table "customers" and yoy (f.instance) change the address, you can save, modify the actual value but conserve the historical value.
Previously I am reading on how to create a Form that permit to obtain all the data required (not to complete) but to consult and if u want to modify.
I think this form could be easy but I want to create the register of the modification so that if any problem I can check the person who changed the data when and what items.
Hi all, Im updating my current checkbook registry database. Just want to be sure that table look ok to everyone before starting the coding process. This will be a multi user - multi account program. I have attached the relations diagram. Please give me some suggestions as to what fields i might need to add.
When using the runtime version, there is an issue with trusted locations. The only way around this, it seems is to edit (add) the registry key,My research tells me the key to be added is:
If I use the Packing Wizard with Access 2007 to prepare an installation disk, there is the option for Additional Registry Keys, which looks promising, however, I am unsure how to proceed. You are asked: Root, Key, Name and Value. There are 4 options for Root: Default root, Current user, All users, Classes root.
I have always had solid read access to the Windows registry running on Windows XP with Access 2007. I am utilizing code from here in a separate VBA Module to obtain access to the Windows registry:
"Change registry settings in VBA"
[URL]
On Windows 7 x64 / Access 2010 x86, I am seeing a 0 value in lngKeyHandle. Also, m_lngRetVal has a value of 2 after the RegOpenKey LOC.
Code: ' -------------------------------------------------------------- ' Query the key path ' -------------------------------------------------------------- m_lngRetVal = RegOpenKey(lngRootKey, strRegKeyPath, lngKeyHandle) ' -------------------------------------------------------------- ' If no key handle was found then there is no key. Leave here. ' -------------------------------------------------------------- If lngKeyHandle = 0 Then regQuery_A_Key = vbNullString m_lngRetVal = RegCloseKey(lngKeyHandle) ' always close the handle Exit Function End If
I have verified that I have the key successfully in the registry... installed via the .reg file that works on Windows XP / Access 2007 systems.
When I recently opened a Db I had been working on I received the attached Msg. The path to the Db is C:Database ProjectsAEMSWarranties and Sales.mdb Once OK is pressed the Db works fine.
I created a new Db and imported all objects, but no change.
On one of my PC's at home I thought I would give Office 2007 a go. It ran so slow and bogged down that I un-installed it and re-installed Office XP
Now when opening a db with an image the attached error message appears. The Db opened OK previously, and works on my other PC's, so I presume it is an office installation error.
hi i get the error "The database is already opened exclisively by another user" after running the following code. i ran the same code under the same conditions on my home pc and it worked fine.
Private Sub Command1_Click()
Dim dbs As Database Dim qdf As QueryDef Dim strSQL As String
Set dbs = CurrentDb strSQL = "update Emp set Salary = 786+ val(text2)- val(text3) where EmpID = '& val(text1) &'" Set qdf = dbs.CreateQueryDef("", strSQL)