Join On Update/Append
Nov 7, 2006
I am trying to create update and append queries that deal with multiple tables. I can't seem to get it to work. Any help would be appreciated.
The update query needs to reverse this select query:
SELECT tblPayment.AmountOfPmt, tblPayment.DueDate, tblPayment.DateIssued, tblPayment.CheckNumber, tblPayment.PaymentType
FROM tblPayment INNER JOIN (tblLease INNER JOIN tblCustomer ON tblLease.CustomerID = tblCustomer.CustomerID) ON tblPayment.LeaseID = tblLease.LeaseID
WHERE (((tblCustomer.CustomerID) Like [spCustomerID]));
The append query needs to insert CustomerID, FirstName, LastName, SecondaryCustomer, PhoneNumber, DOB, Email, Active into tblCustomer, but also DateSigned, DateEffective, DateExpire, CustomerID, LotID into tblLease.
I can't figure either of these two out. Any help would be great.
Thanks in advance.
View Replies
ADVERTISEMENT
Aug 2, 2005
I have a table from which I want to extract selected fields from each record and write a new corresponding record in a separate table (like a summary of each record). This process will need to be repeated on a regular basis. I am using an append query so far but this appends 0 rows unless I set the join type on the query to option to 2 (I think a left outer join) - this means that each time I run the query - it appends records that have already been appended previously. What I want is the query to append only those records that exist in the primary table but don't exist in the secondary one. Can't see a join type that will do this for me - have experimented with the alternatives but it just creates more duplicates.
View 2 Replies
View Related
Jan 20, 2014
I am fairly new to Acces 2010.I have two seperate tables hat I need to use to compare data. As you can see table A and table B have some of the same item numbers but they also have different item numbers that are not other table. Also some of the item numbers are duplicated in each table but that is okay because the cost of the item is different. Both tables contain item numbers for the products. I want all of Table A item numbers including the item numbers that are in table B. But I also want Table B item numbers except for the item numbers that are also in Table A. In the real raw data file some of the item number fields are blank but the other fields have values. How should I query these tables so that I achieve the correct results?
Table A
Item Num Costof Item Supplier Sales Tax Purchase Month
1234 $1.00 Walmart $2.00 Dec 2013
2222 $4.00 Walmart $1.00 Dec 2013
2222 $2.00 Walmart $1.00 Dec 2013
1276 $3.00 Sams club $1.50 Dec 2013
7898 $5.00 Texaco $5.00 Dec 2013
4567 $3.50 Food Lion $1.00 Dec 2013
[code]....
View 3 Replies
View Related
Sep 18, 2006
I'm trying to update a table via a join with the current query:
UPDATE zarageddebt_CURR INNER JOIN baddebt_CURR ON baddebt_CURR.DocNo = zarageddebt_CURR.DocNo SET zarageddebt_CURR.[Bad Debt] = baddebt_CURR.[Bad Debt];
Unfortunately, I have just discovered that the relationship is not always 1 to 1 (although it is in 99% of cases). In those where, it isn't and the destination table has, say, 3 records with the same DocNo, I would like to update only the top record.
Can this be done in the join? I don't think this will work:
UPDATE zarageddebt_CURR INNER JOIN baddebt_CURR ON TOP 1 baddebt_CURR.DocNo = zarageddebt_CURR.DocNo SET zarageddebt_CURR.[Bad Debt] = baddebt_CURR.[Bad Debt];
View 2 Replies
View Related
Aug 28, 2007
I am running the following UPDATE statement on a table with about 1000 rows, using a self join:
UPDATE [Tax Report Co Date] INNER JOIN [Tax Report Co Date] AS [Tax Report Co Date_1]
ON [Tax Report Co Date].ID = [Tax Report Co Date_1].[ID+1]
SET [Tax Report Co Date].Co = [tax report co date_1].co, [Tax Report Co Date].[Date] = [tax report co date_1].date
WHERE ((([Tax Report Co Date].Co) Is Null) AND (([Tax Report Co Date].Date) Is Null));
The problem is that it doesn't update all of the appropriate rows "the first time". It leaves gaps of rows unchanged... almost as if it blocked itself from updating, or some sort of buffer/cache issue. If I run the UPDATE a second time it updates the remaining rows successfully.
Any ideas on why it takes multiple passes to perform this update? Can I do something differently?
View 7 Replies
View Related
Apr 21, 2008
Hi, we are currently working on a project to strip down one of our SQL Server based applications to an Access 2007 based solution, and I met this problem: the query just doesn't work on the new Access mdb. Can anyone take a look and give some help? Thanks a lot.
UPDATE A SET MaxPrice= B.MaxPrice FROM
Summary A
INNER JOIN
(SELECT Name, MAX(DailyPrice) AS MaxPrice FROM Data GROUP BY NAME) B
ON a.Name = B.Name
View 1 Replies
View Related
May 23, 2005
Hi,
I am trying to do an update on a table with a query which has a join as follows but getting an error:
UPDATE RoleObjects
SET AccessType = 1
FROM RoleObjects
INNER JOIN Objects On Objects.ObjectID = RoleObjects.ObjectID
WHERE (RoleObjects.RoleID <> 1) AND (MID(Objects.ObjectName, 4, 2) = 'SR')
I tried to debug the code and found that the following part of the code with the Select clause works fine.
SELECT *
FROM RoleObjects
INNER JOIN Objects On Objects.ObjectID = RoleObjects.ObjectID
WHERE (RoleObjects.RoleID <> 1) AND (MID(Objects.ObjectName, 4, 2) = 'SR')
Do u have any suggestions.. ??
Thanks a lot for your time.
View 1 Replies
View Related
Sep 7, 2006
I need help with an update query. I download several data tables from SAP that I would like to join again in Access. I have set up an updae querry but not all the records are unique. I thought I had fixed this by using a flag to update to -1 processed when running the query and set the criteria on the flag 0 to process items. But the whole querry processes before setting the flags at the end and I want the flag to be set so that it excludes processed items when each line of he query is executed. Can anyone help?
View 1 Replies
View Related
Aug 29, 2013
I was working on an update query while joined to another table - and the error I was receiving was the query was not updatable. Er... The table that was being updated sure seemed able to be updated...
Then I wondered if the reason this didn't work was because the other table I was updating from was a query whose records were sum'd and group'd by..I ended up testing the idea by inserting the query's records into a temp table and then did the update to the target table from the temp table... which worked fine.
View 1 Replies
View Related
Apr 11, 2013
I have 2 tables that are joined by a many to many table:
tblProductInfo
- ProductID
tblProductLinerMM
- PLProductID (FK to [tblProductInfo].[ProductID])
- PLLinerID (FK to [tblLiner].[LinerID])
tblLiner
- LinerID
I have a range of products that each use 2 liners. An inner liner and an outer liner. I need to add 2 records per product to the tblProductLinerMM table.
for example
tblProductInfo has the following records:
- 2138557
- 2378954
- 4387657
tblLiner has 2 liners in particular that relate to these products:
- L5475
- L5468
I need to create the following records in tblProductLinerMM preferably with the use of a query :
- 2138557 | L5475
- 2138557 | L5468
- 2378954 | L5475
- 2378954 | L5468
- 4387657 | L5475
- 4387657 | L5468
View 1 Replies
View Related
Jun 21, 2005
Can anyone tell me how to modify data in a querry befor appending the data to a new table
Thanks,
View 3 Replies
View Related
Aug 12, 2005
Hi
Can someone please explain to me what I'm doing wrong.
I'm trying to update my table called Portfolio with information sent to me via spreadsheet. I've been able to import the data from Excel into a table called PortfolioUpdate and the data types are all the same, but when i try to run the append query it keeps coming up with the message below
Switchboard can't append all the records in the append query.
Switchboard set 0 field(s) to Null due to a type conversion failure, and it didn't add 1889 record(s) to the table due to key violations, 0 record(s) due to lock violations, and 0 record(s) due to validation rule violations.
I've checked that all the data types are the same and I've also removed/added primary keys from the PortfolioUpdate table to see if that was the problem but to no avail.
Am I even doing this right?
If anyone could help that could be great
Thanks
Trish
View 11 Replies
View Related
Sep 19, 2005
Just wondering if someone can point me in the right direction so that i can solve my problem?
Basically what i have is a select query that carries out some calculations based on data entered. These calculations are expressions as i am sure you guys know. what i want to do is put the value from the expression/calculation into my table in the correct fields made for these values. However i have tried everything i can think of to get this data into the tables fields but to no avail.
example. Expr1: [field1]*[field2] the answer created by [Expr1] is the value i want to be placed in [field3]
Can anyone help me on how i can do this
View 4 Replies
View Related
Aug 15, 2006
I need an append query to also update a yes/no box or a text box with "yes" "no" in the field.
I don't know how to do this in SQL. Please help.
Query 1 is the name of the query I want updated from "yes" to "no"
Something like:
AFTER APPEND (I am not sure how to do the "after append" in sql)
UPDATE Query 1
SET Query 1.DueToday = "No"
Where DueToday = "Yes"
View 8 Replies
View Related
Jan 11, 2007
Hi,
can any help : )
i am trying to mass update one field in a table.
Basically i have created a new check box (Yes/No Value) in my customers table.
Basically i will tick this box if a customers placed any order with our company.
At present all our existing customers have placed orders with us. and i want to add value Yes to this field.
What method can i use to make this Mass update all customers records.
thanks in advance
View 2 Replies
View Related
Feb 15, 2007
Hello,
I am trying to develope a database that calculates and accrues vacation leave monthly.
I am trying to write a query that will add 2.5 days to each employee every month and I would like to automate this update process but I am not sure how can I get this query to know each beggining of the month and do the update. Does any body have a better understanding or suggestion of going about this issue
Your help is much appreciated
View 3 Replies
View Related
Mar 19, 2007
Hi,
I am working on a scheduling database and have got stuck with what I thought would be a simple update or append query (It probably is very simple for non-newbies).
I am trying to create an update query to update the "Cell_ID" field in tbl_ScheduledAssays with the "Cell_ID" field from tbl_Machines.
The tbl_ScheduledAssays stores each assay that needs to be run. The tbl_Machines stores both the "Machine_ID" on which the assays are run and which "Cell_ID" that machine belongs to.
Some assays have a "Machine_ID" assigned up front as they have to be run on a certain machine, however other assays can be run on any machine so are assigned "Machine_ID" 51 which is a blank.
For all records in the tbl_ScheduledAssays table where the machine ID is <>51 I want the Query to check the "Machine_ID" and read from the tbl_Machines which "Cell_ID" that machine is in and then add that "Cell_ID" to the "Cell_ID" in the tbl_ScheduledAssays table.
I hope this makes sense! I have tried to search the forum but everthing I have tried so far has failed. Have also tried to do an append query to no avail.
View 2 Replies
View Related
Sep 3, 2007
Hey guys-
I have a 'Master Table' that holds all my imported records. After a few queries and whatnot- I need to break it down into specialized tables. For example- my Sales Associate info goes into one table (all their contact info, employee code, etc)- while the product info goes into another table.
As I import daily orders and whatnot- it also brings in the sales associates info. So, I want to have Access check the existing SalesEmployee Table for any existing records (by their employee code)- and if it doesn't exist, append it into the table. HOWEVER- if they are already showing in the SalesEmployee Table, I want it to check to see if their contact info is the same- if not, update it with the new info I am importing.
How do I go about doing this? Is this an update query all by itself? Or, do I need a more complex if/then statements and whatnot?
Thanks!
View 5 Replies
View Related
Apr 8, 2008
I have a table that I need to update existing data and append new data. All of the new data is in the same file. Is there a way I can update and append at the same time?
View 1 Replies
View Related
Jan 25, 2005
Hello
I have some different fields (cell content) in the same tables that need to be joined or merged together. Then I also have several fields that need to be joined from several different tables. I need to add a prefix to everything I add.
Here is a sample of the join I need within one table:
What I have:
|__JHOLDINGS__|__MOVINGWALL___|
|__V.30 1998-_|________5______|
What I want:
|___JHOLDINGS___|
|__V.30 1998-___|
|_____MW: 5_____|
Here's another sample of the join I need between two tables:
What I have:
Table 1: Super Table
|__________NOTES_________|
|__This title comes in___|
|__microfilm and PM______|
Table 2: Project MUSE
|__________NOTES_________|
|__This is a made-up_____|
|__note__________________|
What I want:
Table 1: Super Table
|__________NOTES_________|
|__This title comes in___|
|__microfilm and PM______|
|__Project MUSE: This is_|
|_ a made-up note________|
Table 2: Project Muse
Stays the same.
I know how to move part of a cell to another blank cell, and I know how to delete part of a cell.. But I don't know how to move part of a cell to a cell that already has content.
If you search for my name and this post: Deleting Certain Text Between Character in a Cell, you'll see what I've learned already. I'm thinking maybe I just need to run the same sort of function/module, but append instead of update. Dunno.
Thanks in advance,
Siena
View 6 Replies
View Related
Jul 26, 2007
Could someone please try to give me a step by step method for using an append query to update a table. Gary gave me a ton of help before but im still a little stuck. Thanks in advance. :)
View 1 Replies
View Related
Aug 7, 2006
I have an expense table and I want the expenses to be written to a new table every month, quarter, half-year, or year depending on what the user has selected. I want to group the expenses somehow and I want it to show all monthly expenses, then show which ones have +1 month. All those will get put into a append query and added to a new table that stores all the expenses from hence forth.
Alright, I have started to figure it out ( a problem from earlier) but I think I need some help. I want an if statement but I am not familiar with date functions. In an append query I want to look at my original table and add records if it is past a certain date.
For a monthly expense (entry date is 01/01/2006)
If (dateentered) month, +1
Then write the record.
View 2 Replies
View Related
Apr 4, 2014
I have two tables: tblModels and tblParts. tblModels has primary key ModelID; tblParts has primary key PartID, and also has a ModelID field that's hooked to tblModels's ModelID with referential integrity (cascade all). I have a button on my form that duplicates the model (creating a new record in tblModels and getting a new ModelID), and when that happens, I'd like for the duplication process to run an Append Query that captures all records in tblParts that matches the FIRST ModelID (the original one), and makes new copies of them in the same table, but then sets the ModelID for each new record to the NEW ModelID (that was created with the button press).
I have done this using TempVars in my Append Query, and everything is working great, except for when all the Parts records get copied and added, they all have the OLD ModelID on them, which essentially duplicates the records in the old Model and leaves the new Model empty of associated records!The Append Query is using the ModelID field to find the records I want, so how do I then get it to write a NEW ModelID to each record after they're added to the table?
EDIT: I thought of maybe doing the old TempTable, Append Query dumps to that, Update Query changes ModelID's, Append Query dumps them back to the original table... but that seems like the long way around.
View 4 Replies
View Related
May 13, 2005
I am relatively new to the use of VBA and ADO to append Oracle data to a Access Table. The code below was my first attempt and it doesn't work!!
Upon your review, you can see that there are quite a few calculated fields in the table which is generally considered to be a maintenance problem. I plan to update all fields within the table that ends with "Current."
Any insight as to what the problem could be? Is there a more efficient method to append/update data within the Access db? How would the module differ if I wanted to update the fields on the table that end with "Current?"
Do I have too many calculated fields?
Sub ADO_AppendEncDetailNew()
Dim Rs As New ADODB.Recordset, connString As String
Dim cn As New ADODB.Connection, sqlEncData As String
connString = "Provider=MSDAORA.1;" & _
"User ID=wv_juilo;" & _
"Data Source=Mrr;" & _
"Password=juilo;" & _
"Persist Security Info=True"
cn.ConnectionString = connString
cn.Open connString
sqlEncData = "SELECT ep.account_id, pe.customer_no, pt.last_name, pt.first_name " & _
pt.records_no, pe.drg_no, pe.length_of_stay, pe.patient_type, pe.admit_date, pe.discharge_date,
pe.total_charge, pe.expected_payment, pe.date_billed, max(trunc(epd.payment_date)),
ep.total_payments, pe.total_payments, pe.total_charges -
sum(ep.noncovered_pt_charges + ep.noncovered_wo_charges), pe.total_charges -
sum(etd.adjustment_amount), trunc(sysdate),
ep.total_payments/pe.expected_payment
from entity_pay ep, Preview_encounter pe, encounter_transaction_details etd, patient pt,
and
ep.account_id Not In ('CTOC','VNN','VCM','VRM','VCU','LP5')
AND epd.TRANSACTION_CODE in ('68806','68807','68808','68812') AND
pe.expected_payment>0 AND pe.expected_payment - pe.total_payments>0 AND
ep.total_payments/pe.expected_payment<0.75 AND etd.transaction_code in
('4569','4575','4580','4896') and trunc(epd.date_updated) =
trunc(sysdate) - 15) GROUP BY ep.account_id, pe.encounter_no, trunc(pe.ADMIT_DATE),
trunc(pe.discharge_date), pe.date_billed, pe.total_payments, pe.total_charges,
pe.expected_payment, ep. total_payments, pe.expected_payment -
ep.total_payments,trunc(epd.payment_date), pe.expected_payment - pe.total_payments,
ep.total_payments/pe.expected_payment, pe.total_payments - ep.total_payments,
trunc(epd.date_updated), trunc(SYSDATE), pt.last_name, pt.first_name,
pt.records_no, pe.patient_type HAVING ((pe.total_charges - Sum
(etd.adjustment_amount)) - pe.expected_payment) <> 0 ORDER BY 1, 2, 10
Rs.Open sqlEncData, cn, adOpenStatic, adLockReadOnly
Do Until Rs.EOF
"INSERT INTO tbl_CustDetail
Rs.AddNew
Rs!CID_Orig = Rs!entity_pay.account_id
Rs!CID_Current = Rs!entity_pay.account_id
Rs!EncNo = Rs!Preview_encounter.Customer_No
Rs!LastName = Rs!Patient.Last_Name
Rs!FirstName = Rs!Patient.First_Name
Rs!AdmitDate = Rs!Preview_encounter.admit_date
Rs!DschDate = Rs!Preview_encounter.discharge_date
Rs!TotChgOrig = Rs!Preview_encounter.Total_Charges
Rs!TotChgCurrent = Rs!Preview_encounter.Total_Charges
Rs!Bal_AfterInsPymts = Rs!Preview_encounter.expected_payment - Rs!entity_pay.Total_Payments
Rs!Bal_AfterAllPymts = Rs!Preview_encounter.expected_payment - Rs!Preview_encounter.Total_Payments
Rs!CoveredCharges = Rs!Preview_encounter.Total_Charges - Sum(entity_pay.noncovered_ct_charges + entity_pay.noncovered_ft_charges)
Rs!CalcAllowOrig = Rs!Preview_encounter.Total_Charges - Sum(Encounter_Transaction_Details.Adjustment_Amoun t)
Rs!CalcAllowCurrent = Rs!Preview_encounter.Total_Charges - Sum(Encounter_Transaction_Details.Adjustment_Amoun t)
Rs!VarianceOrig = Rs!Preview_encounter.Expected_Reimbursment - (Preview_encounter.Total_Charges - Sum(Encounter_Transaction_Details.Adjustment_Amoun t)
Rs!VarianceCurrent = Rs!Preview_encounter.Expected_Reimbursment - (Preview_encounter.Total_Charges - Sum(Encounter_Transaction_Details.Adjustment_Amoun t)
Rs!OrigRatio = Rs!Preview_encounter.expected_payment / entity_pay.Total_Payments
Rs!RatioLatest = Rs!Preview_encounter.expected_payment / entity_pay.Total_Payments
Rs!DateIdentified = Rs!trunc(sysdate)
Rs!Date_LastPayorPymt = Rs!max(Encounter_Payment_Detail.payment_date)
Rs.Update
Set Rs = Nothing
End Sub
View 4 Replies
View Related
Sep 4, 2005
I am accessing an oracle database that has several thousand records in it. I am quering for specific requirements, but would like to save my query results in a local access database for faster searching capabilities. Is there a way for me to set up a query that will go out to my oracle table files, select the records that pertain to my search criteria, and add records to locally stored tables without duplicating itself each time that I run the query? I would appreciate any assistance in this matter. Thanks for your help!
View 1 Replies
View Related
Feb 19, 2008
I have a table that is filled based on selections that a user makes in combo boxes on a form. I am having trouble trying to figure out the best way to prevent duplicates from being inserted in the table when I do the append query part.
Since the table is filled based on the various selections the user makes I dont have a primary key or unique field.
Can someone help me figure out the best way to do this append/update queries to prevent duplicates. Also if you have a strategy for setting up some sort of unique or primary key for fields that could all be the same yet in the table only 1 record will show, no duplicates.
View 1 Replies
View Related
