I have created a management system for small home builders and contractors.
Typically these customers will have less than 25 users. So far I have installed it in a single customer’s site, but I want to expand.
I basically have two questions.
1. What is the best way to deliver this product without the end user needing Access?
2. How can I ensure they don’t make illegal copies and give to their friends or add user without purchasing more licenses?
I am trying to make sense of the different type of Access licences. I want to be able to distribute the access database with my application. Can anyone tell me how I can do this? My VB application needs to store & access data from a database and I was wondering if I can use Access and distribute the database - is it legal and if yes, how can I do it? What sort of license do I need. Thank you.
I'm building a Software Licensing Database & I have come across this particular problem and i am not 100% sure which way would be the best way for me to solve it. So far I have created the database so that a user/software/license can be added to the system. The main form display's users information and below in a tabbed subform it displays the installed software on the machine. On the second tab it displays the license's attached to that machine. On each of these subforms its provides the user to add/delete software/license's however my problem is with error handling within the system. I have managed to make it so that a user can only selelct license's that are specific Each License can cover anywhere from 1 to <x-amount> of pc's. What I want to be able to do is the user can select a license if their is 1 available and a small text box which denote's how many license's are available. So i know im going to need a license count which is easy enough using a SUM within a query. It is the error handling that im stuck on. I need to create a statement using the 'equal to or greater than' operator if possible saying If NumberofLicenses >= then add license Else If vbOKonly message - "Insufficient License's to cover this piece of software please purchase & add the new license to the system then try again"
Something along those lines.. I just dont know where this would go or how to write it! If anyone has a better way of achieving this.. fire away im open to ideas!
First off, I'm a total newbie at Access. I've had it for a few weeks now and am trying to develop an order entry system for our church (we have a discounted food ministry). I've gotten pretty far with it.
Anyway, once this app is complete, how can we have 2 computers updating one database or do we have to use just one computer exclusively and to do more than that, we'd have to go to sql server?
Also, can we install access on more than one pc? We have access 2003. We don't have any problems with buying another copy, but if we buy it, we need to know we can have 2 computers, accessing one access database. Is this possible?
I'm not good with access at all, i'm basically after removing all workgroup protection from a database file. I have full access to the file, admin passwords etc, i'm just having serious difficulty trying to find a tutorial or any information regarding how it can be removed!
I have been working on some database protection techniques and have found floors in all of them.
Basically I have to protect a database not using the application password... which has a different password for each form. This means using form passwords ect... but all of them can be hacked by using the shift key on start-up does anyone know how to get around this as im stuck and could really do with another’s perspective.
I have been working on some database protection, in which I am trying stop my tables from being able to be imported from other databases. Does anyone know where I should start or even if it is at all possible?
I need to know if there is any way to password protect a single query. I currently have a database and there are several users that have access to run queries but I need to have some security as others are making modifications to queries that they shouldn't be.
I have a set of command buttons on a form that open up a series of reports. The problem I have is that only certain users should have access to particular reports and I want to be able to put some kind of password protection in.
If anyone knows how to do this please let me know.
If i want to protect everything in the database how can i do that.
I dont want a password to open the database, and I only want users to be able to edit the records through my forms (without use of a password), but i dont want any1 being able to edit records manually, edit forms, or modules, however i do want them to be able to create and use macros and queries.
I've recently taken over a database that a collegue of mine was developing and he has disabled certain functions within the database which I can't enable. Specifically, he has disabled the ability to right click over anthing in design view so you can view the list of options available. Does anyone know how I can re-enable this feature?
Hi I have been called in by a client who had a db app put together (not very well). The original developers simply are doing nothing and the client is in despair. They have asked me to see if I can both correct the original bugs and also develop the database on. The history is one of many unanswered phone calls and emails with the occasional promise that never gets anywhere. We spoke to the developer today who said they couldn't give the access code and then spoke to the other part of the duo who said he didn't have the code but would see if he can talk it out of the developer. The client is a charity and like doing things the right way so I think that they will have played fair with the developer but it hasn't been reciprocated. In exploring what they have I have been blocked by a password when I try to get into the VBA. Is there any way to crack into this? It would be helpful to know so that if the promised password does not materialise (and they were not holding their breath) do I tell them it is a no-hoper, or might I be able to work through? The only alternative would appear to be to start from scratch but I suspect that would be financially too painful for them.
There is nothing earth shattering in what it does - even if it worked properly - and it is a small FE/BE database. I have full access to the BE but need to get into the code behind forms and modules to see where it is going wrong.
Any help or pointers would be most appreciated. I recognise the ethical issues but also sympathise with a client who has been shafted. Best wishes
I need some help creating a way for two different type of users to be redirected to different forms after entering a password. I tried using the groups security in access but it's not good.
What I need the program to do is:
ask the user to enter a password. then if the password is correct and they are managers they will see the managers opening form ("form1") and if they are employees they will se a different opening form("form2") with less options and different reports.
I have an old access 97 database that I can open with a user password, but cannot open as an administrator. I need to look at some development issues. My problem is that the vendor who wrote the database no longer exists to help me. Does anyone know how to strip off password so that I can examine this old database?
I have set up a front screen which has linked buttons to other forms. When I open up some of the forms (using the buttons) I would like them to be password protected.
I know tihs is probably really easy, but I cant get it sussed!!
I have a small tracking Access DB at work that someone put a password on. No one seems to know the password. I'm wondering if there is a file that stores the password so that I can remove it so I can access the DB.
Password Protection for E-mailed Access Report Sorry this is a bit long winded but here goes - we have a very simple Access 2002 DB of 60 – 100 client records. It’s updated weekly and a report is then sent to a distribution list. In the past it was printed and faxed. As all on the list have e-mail I set up a macro to e-mail the .mdb to an Outook Distribution List. It works wonderfully and is much easier and faster. However - a couple of weeks ago one of the users complained saying we must password protect the data. Our Exchange Server is not yet set up to use certificates and Ditital IDs so I worked out the only way I can think of to p/w protect the file. The data is exported as an RTF. Once the user is in Outlook she opens the attachment and runs a macro in Word which :- Saves the RTF as a DOC file (uses the same name each time) Saves the DOC file with password protection However the user reports that often it seems to link to the previous weeks data unless she deletes the attached file and opens the TEMP internet files folder, finds the correct week and attaches that. Can anyone think of an easier and more foolproof way of doing this – is there something in Access I have missed? Thanks for any help or advice – Dika
I am trying to set password protection on a combobox where there are only a few people who I want to be able to select their name to provide authorisation. I found the below code on a website and modified it slightly for my table (tbl_Approval) that contains two fields; Approver and Password. I can see how the code is supposed to work however I keep getting a syntax error (missing operator) in query expression on line: Set rs = CurrentDb.OpenRecordset(sql).
Code: Private Sub Approved_By_Enter() Dim pwd As String Dim rs As Object, rstable As Object, count As Integer, counter As_ Integer Dim sql As String, recount As Integer sql = "SELECT * " & "FROM [tbl_Approval] " & "WHERE [Approver]= " & Me.Approved_By Set rs = CurrentDb.OpenRecordset(sql)
I have learnt so much here and I could do with some advise from all of you.
Recently I have developed a software using MS Access and I am in the process of getting Copyrights, Trademark rights for my software.
The software is to be distributed via the internet for personal use. However, I have been having serious concerns about people trying to reverse engineer the code and selling it under another name.
The last thing I would want is someone else making money off pawning this. Not only does it bring bad credibility but can really dent the business end for me.
Can anyone please suggest any way that I can block anybody from reverse engineering the code. Also how can I make my program user specific and tamper proof??
I would like to know if I can create a password protection on specific tables. Within my database, there are certain tables and/or reports to be view by a selective amount of personnel. Can I password protect just that view?
I have an Access 2010 form within my database in which I have a series of 8 tabs on a tab control. I am the only user who will have access to these tabs. I want to require a password in order to permit access to the tabs. The very first tab on the tab control works as a cover tab. There is no relevant information for anyone to view...only a graphic.
How to code the "on change" event of the tab control.
Just as the title describes, I can't seem to find a solution to be able to link the front-end to the back-end tables through the common file dialog when the backend is an accdb file that is password encrypted.
See the example attached. Here it should work just fine per the Article at :
http://support.microsoft.com/kb/181076
I've found it works fine without a password encrypted back-end but not with a password encrypted back-end.
Anyone have any ideas? It would be nice to use this feature in Access as well as automating the relinking.
