Hi All.
Is it possible to limit the number of records in a form, to a number given in a linked form.
For Example.
tblA
StreetName
No_Of_Houses
tblB
Name
Number
I would only want the number of records in tblB to be the same as No_Of_Houses in tblA.
I have seen previous threads where you can limit it to a number, but do not know where to go from there.
Can anyone help?
Thanks.
Frank.
Is there a limit on the number of records you can have in an access database? I've got one with 8500 records and it's been a PITA! I have a webpage on our intranet so users can go and enter their information to it, and they get a nasty error whenever they try to enter information. I'm trying to figure out why and i was just wondering... i know it's not the webpage because when i connect it to my test database it works fine? so i dunno :confused:
any help is greatly appreciated!!
I want to limit the # of records being entered in a form according to a limit value which has to come from a query.
View 11 Replies View Relatedbuilding a validation expression that concerns four of my fields:
Quote:
Country | Text
Centr | Boolean
Centr limit | Integer
Apply | Boolean
The number of records that have the same country, AND Centr=TRUE, AND Apply=TRUE, should not exceed the Centr limit value.
I have a report that is group based on a number refered to as "Line". I want to only have three records per group. How can I do this?
View 5 Replies View RelatedI have a database that has transactions since year 2009. I want the users to only be able to view and edit transactions that were entered in the last 6 days. I was initially able to do this by putting a filter in the Property Sheet section of the form and choosing Yes for Filter on Load.
However, a user was able to discover that by clicking on Clear All Filters, the filter I set was also cleared, thus making them see all the transactions beginning year 2009.
I am looking to run a query in Access that will limit the number of records for each criteria.
example:
>10 years count 300
1-3 years count 100
4-6 years count 200
6-10 years count 250
can limit the amount in one query or have to do the criteria separate?
Hi,
I have searched for an answer to this question a lot, but I could not find it. I hope anyone can help me with the following:
I need to do a database in MS Access; however, there is so much information and some of it is not related. After normalising it, it looks like I need a number of tables. Is there a limit to how many tables you can have on Access? And how many tables is the recommended size?
Any help will be very much appreciated.
Bee
I am designing a database for a marketing company. One of my tables has all of the company's contacts. On the contacts form, I have a button that opens up a query that shows the information for the company that contact works for. I have a problem where if I have more than one contact per company, it will return that many results (which is just a repeated list of the same company information). It is an eyesore to look at the same information in two or more rows, so I was wondering, can I make the query return only one result? I've been looking online, and I haven't found this at all. Thanks a lot.
View 1 Replies View RelatedHeyI'm trying to create a Library database. This involves restricting the number of loans available to each member (currently 3). I need to make it so no more than 3 records exist in that table for each member. For now ive just entered a VB script that has a message box saying not to enter more than 3 loans per person but I dont think thatll be enough, I need some sort of validation for the whole table rather than a field.I know how to limit the returns of sql queries which is all I can find, but not how to limit the actual amount of entries. The loan table is part of a double query within a subform of the member form if it helps :s
View 6 Replies View RelatedMy boss has a table with tons of fields on it, he designed it this way because it was easier to add data to one place, but now the table keeps crashing, does ms 2k have a limit to the number of fields in a table??
Thanks in advance.
I only seem to be able to add some 30 calculated fields to a form or report. Anything over this returns a #Name? error. I've seen this before but have searched this and other forums but cannot find an answer. I suspect a memory issue but I have 2 gb on Pc. Any Ideas?
View 10 Replies View RelatedI have a form that retrieves information from a query (which of course uses data from a table).Everything is working great and I want to roll it out.will multiple users accessing the form/query/table at the same time corrupt the database or not return a result?
View 4 Replies View RelatedHi guys,
I have a text box, which requires a 8-digit number entry. I have wrote the code to check that the length is 8 and if it isn't a label will turn visible next to the field telling the user entry must be 8 digits.
This works for when i enter a number less than 8-digits but when i input a number with more digits as it does not fit into the text box it turns it to a scientific format value and when the code runs it shows the length is actually 8! And therefore the entry is valid!
I.e. when i input 123456789 the text box shows 1.23E+08 which is 8 charecters!
I dont want any error messages to pop up as i handle them by code and use labels to show the error message next to the problem field and i would like to keep this consistent. Is there any way i can do this by a function or a property in the table or form?
I appreciate any help/advice
cheers
Help anyone
I have a small database which lists delegates for courses.
I have a venue which will hold only a small amount of people
is there a way of stopping data entry when it gets to a certain point. ie putting a limit on how many columns can be entered on a single table
I am looking for a way to limit the number of rows that are added to the subform of a main form. Is there anyway that the allowable number of rows be defined using a field on the main form.
View 3 Replies View RelatedI am new to Access and I am developing a form. I have already read and found useful resources on internet but there is something I am not able to sort out.I have seen that the limit of fields I can enter in Access is 255 and my survey is far below that number.So no issue at all when I created the fields in Data view.However, the issues started when I created a form.
I created a form by Create>Form.The last few fields, at the very bottom of the form, are squeezed onto each other as if there was not any space available. Is there a limit to the number of fields I can have in a form? There should not be if I am allowed to enter up to 255 fields. How can I go about it? Should I alternatively create 2 forms? I would rather not to though.
Hi all, I've searched this with no success.
I have a ODBC (Firebird) table linked using a DSN connection which has >300 fields. In Access, the linked table only show 256 fields (max for Access). Otherwise the link works fine. I have no control over the source Firebird table.
What I'd like to do is limit which fields from the Firebird table are shown in Access. I don't need all the fields, but I need some that are at the end and are not linked in the current setup.
I'm very much a novice at using ODBC, but can I somehow use SQL or some other method to specify which fields to show in the linked table?
Thanks for any suggestions,
John
Ok, not sure if this is even possible or where to even start..
I've got a form that has all the info for a client, eg..
Client First Name
Client Last Name
Client Hours
Client WE/CS/EE
Client Day And Times
Client Phone
Client Comments
Begin Date & End Date (2 boxs) on there for date input..
and what i'm trying to do is limit that any date entered between begin date and end date, it'll check and make sure there is only ever 20 clients on any 1 day..
i thought Datediff would be the way to go, but then again how do you get it to search each day and make sure theres only 20 clients on there..
I have to submit a file to a government agency that requires more than 200 columns. Is there a number of column limit an Access table can have?
View 1 Replies View RelatedIs it possible (without using VB) to limit the number of selections a user can make in a multiple value list?
My list is one a form and when in the form field it brings up a total of 15 names with checkboxes, allowing you to "check" each name you want. However, I want to be able to have as many names as I need in the list, but limit the user to selecting only two of them.
I am currently trying to figure out how to limit the entries into a nested sub form to just one.
for example im making wine collection database, I have a PURCHASE table, a WINE table containing the FK of the PURCHASE PK, and an INVENTORY contain the FK of the WINE PK.
a purchase can contain many wines, but one wine can only be in one inventory location.
I am trying to add all this information with one form. I fill out the purchase details, enter the info of X bottles of wine were in the purchase, and then with one of those wines selected in their subform, i enter the inventory details for that wine. I go select the next wine in the first subform and the inventory nested subform doesnt allow another entry.
I have this code loaded into the On Current event for the main form:
Private Sub Form_Current()
With Me![INVENTORY Subform].Form
If .Recordset.RecordCount = 0 Then
.AllowAdditions = True
[Code] ....
Is there a limit to the number of fucntions/suroutines in a Form's module. I got an overflowerror when compiling and I moved a fucntion from the Forms mdoule to another module and the error did not re-appear.
View 5 Replies View RelatedMy problem is the following: when I receive say 5 computers in a purchase form, I want to register the serial number of each of them in another form, bound to another table.If I receive 2 units in the purchase form, my user should only be able to input 2 records in the serial form (a continuous form), if we receive 3, then only 3 records,I cannot quite figure out how to build this second (serial number registration form), so that it refuses input after the correct number has been reached.
View 14 Replies View RelatedI have a form I created in the past that auto-fills some of its fields based on the user's selection of a record from a combo box linked to another table. The form has been working perfectly however I recently tried to add a couple of more fields to the form that need to be autofilled. I added the new fields to the source table and added columns to the combobox that should allow my VB code to fill those boxes. However only one of the new fields is filling correctly. After trying a few different things I notice that the problem seems to be with whatever data field becomes the 21st column in the combobox. Is there some sort of limit on the number of columns contained in the data source for such a box?
Option Compare Database
Private Sub EmpIDAutofill_Change()
Me.EmployerCatAutofill.Value = Me.EmpIDAutofill.Column(1)
Me.StreetNumAutofill.Value = Me.EmpIDAutofill.Column(2)
Me.JobCityAutofill.Value = Me.EmpIDAutofill.Column(3)
[code]...
i want to run a querie to criate new tables every 200 records, how can this be done?
View 5 Replies View Related