Hello,
I'm trying to limit the number of text characters displayed in various fields on a form. I want it to appear so that after a certain number of characters it then displayed "..." indicating there is now information in a field.
Thanks for any help!
I Have Created A Client Reference Allocation Screen Which Makes The Clients Reference From Details In A Number Of Text Boxes.
For Example:
Client Number: 0010, Forename: Andrew, Surname: Bloggs, Year: 2007,
Occupation: Driver.
Client Reference = 0010ab-dr07
I Have Copied The Text Boxes So The Information Is Automatically Displayed To Create The Client Reference, But Rather Than Shortening The Copied Text Boxes To Show Only The First Few Characters Is There A Way Of Limiting The Number Of Characters Shown In The Copied Text Boxes??
Matt
Hello again my forum o' saviours, Current filter: WHERE (Assignments.[AcademicYear]) Like ([Please Enter Academic Year])AcademicYear is a field in the Assignments table (duh). In this same query, I have a couple fields (equations and if/thens built on the assignments table) that will need to be used as further filters. I thought something like WHERE ((Assignments.[AcademicYear]) Like ([Please Enter Academic Year]) )& (len([groupwinterbox])+len([groupspringbox])+len([groupfallbox]) > 3) would work, but I keep getting pop-ups asking what the values of the three query-based calculations are. Where did this noob screw up?
View 9 Replies View RelatedWhen I view data in linked tables in MS Access containing foreign characters (umlauts, accents, etc), the foreign characters are not being displayed properly. It is not a font or Access setting because I am using a separate similar database (also containing linked tables) where the foreign characters are being properly displayed.
Is there a setting I'm missing in the linking of the tables? Not sure where else to check.
I have a query that is linked to a data table. The values entered in the data table are fine and display as expected. When I run the query, the results of one of the columns show Chinese like characters instead of the actual value. But, when I filter that column by choosing 'does not contain...' the actual cell contents display. I have 2 other identical queries reading from the same table and they do not display funky.
View 3 Replies View RelatedI would like to limit the number of users connected to a shared database. Each user opens a database as the default 'Admin' user. Does anyone know how to do that without user authentication? What event occurs when a user opens the database? How to supervise the ldb file that manages shared usage? I suppose it should be something with the Workspace object.
Any ideas?
Show me the door, please :-)
In table1 students lectures data are stored as:
Code:
ID studentname lecturesubject lecturedate
1 steve politics 3/2/2013
2 jack politics 3/2/2013
3 steve math 5/2/2013
4 steve politics 7/2/2013
5 jack politics 8/2/2013
6 steve math 8/2/2013
7 jack politics 9/2/2013
8 steve politics 10/2/2013
9 steve math 11/2/2013
10 steve physics 13/2/2013
11 jack politics 15/2/2013
We need a query in which for each student is allowed to preset a limited number of lectures on a specific subject. For example each student can provide only two lectures on a subject and any more lectures on the same subject presented by him will not be counted. In the above example records 7 8 9 and 11 will not be shown in the query.
I have a field in the parent table which indicates how many child tables there should be at the most. I'm uncertain about how to enforce this. I"m using access as the database to a Vb.net app. Should I do it in access or Vb.net or both.
View 6 Replies View RelatedDuring a promotion we are running the customers are only allowed 3 entries into the system per day but the users are occasionally putting some customers in more than that. I could use some kind of function that limits the number of times the account number can be put in on a given date. (Or daily)
I have the following text boxes: ID, Customer first name, customer last name, account number, date, time.
Any ideas please?
During a promotion we are running the customers are only allowed 3 entries into the system per day but the users are occasionally putting some customers in more than that. I could use some kind of function that limits the number of times the account number can be put in on a given date. (Or daily)
I have the following text boxes: ID, Customer first name, customer last name, account number, date, time.
Any ideas please?
I'm trying to create an Access database for my college so that our call centre can allocate students to a specific interview time/date. The problem I'm having is that each interview slot must only have a maximum of 10 students at a time.
I'm creating tables for the student details, address and for each interview slot available.
I'm using Access 2010.
How I can limit the number of records in a table to 10 so that when that interview slot is full it informs the user?
Whenever I use a look up field to enter values, I get the ID number displayed instead of the value (name). How do I rectify this error.
View 2 Replies View RelatedWell boys and girls, its about that time in the week where I have once again come up with a brilliant application for my little Access project, but have no idea how to make it happen.
I will start with a little background info... In the course of the parts recoveries we have different reasons for recovering parts, different people (locations) that request them, and different priorities for recoveries. For example, when a new model comes out, we will recover 100% of the parts for investigation by the factory... however, we may want to take a look at failed water pumps first. In this case, our recovery, until it is complete, will have higher priority than the 100%, otherwise we would not receive any parts.
This is because of the way our warranty system works... It assignes a three digit number to each part number of a recovery (between 1-999). The lower the number, the higher the priority.
So if I am setting up a 100% recovery, I would want to put it in the, say, 200's. This would leave room for an overlapping recovery to be inserted in the 100's where it would divert a certain number of parts away from the normal recovery stream. Then, once a user-defined date or quantity of parts has been reached, the corresponding number goes dead, and any of those part numbers are reunited with the original recovery stream.
Sticking to the example above, typically 100% recoveries would go for say... 2-3 years, where as an in-house recovery might be for 20 parts... Another difference is that the longer term recoveries are managed by the end date, where shorter term recoveries are by number of parts recieved.
What I want to do is be able to auto assign these numbers based on criteria derived from user-inputted data... (i.e. destination, start/end date, recovery type, etc.). Then, when the recovery is complete, whether based on date or quantity recieved, to delete the information associated with the 3 digit number, block its use for 45 days, and then be able to reuse the number for a new recovery.
Whew.
Thanks to anyone who can be bothered to read past the first paragraph, let alone offer any advice.
I want to limit the numer of times a record can be entere into a table. After a record has been entered 3 times, I want an error message or validation rule to tell me it can't be done.
View 7 Replies View RelatedFor my database the business has Clients who they conduct Needs Assessments for, but they only conduct 3 needs assessments. I have a Needs Assessment table with Client ID as the foreign key. how I can limit the number of times a Client ID shows up in the foreign key field to three?
View 2 Replies View RelatedI have a "Currency" field in a table and it holds large numbers (on which I will need to do basic arithmetic operations at some point, so I must store them as a numbers). I have set the "Standard" format on the TextBox used to display it on a form because I want to have thousand separators; I've also set "0" for decimals as I don't need to display them.
So everything displays as I want it even with the largest number that can be stored all the decimals are showing in the text field, but when I click on the field to edit the value instead of having the complete value it is displayed as scientific notation. I would like to display the complete value when editing it instead of the scientific notation, how can I achieve this, if it is possible?
A numeric example: If a user enters 1234567891012, the value displayed is indeed 1234567891012 but if they click on the field again the displayed value while editing is 1.23456789012E+11 (and it switches back to normal notation when the focus changes to another field). I would like to show 123456789012 all the time. I know that Access is capable of it most likely because if I set the Format to "Fixed" the values are always displayed completely (no scientific notation), but unfortunately I would like the thousands separators to show and it is not possible with the "Fixed" format.
Two last details, the scientific notation while editing does not kick in unless there is more than 11 digits in the number and the field width (and/or TextBox width) are sufficient to display up to 20 digits.
Hi,
I have a long list of customers / suppliers and their VAT numbers. I would like to create a query that shows only the customer/supplier number and the first 2 characters (countrycode) from their VAT number. for example
Supplier 3 VAT number NL80980808
endresult should show:
3 NL
Is there anyone that can help me out??
I need to query a field for any records where this field has less that 10 characters. Any suggestions? The reason is depending on the type of customer the field can be 10 or 11 digits. IF there are less than 10 but not blank they need to be pulled for correction.
View 1 Replies View RelatedI have an address database where people have been allowed to type in any characters they want in place of just leaving a missing field blank. For instance the Zip code was not a required field (don't as me why because I don't know. It just wasn't) so over the years when the person entering the data didn't know what the zip code was they would put a ?, a 0, a 000 or a period or what ever else they could think of at the time.
I would like to add a filter in my query where I could eliminate any thing with less then a certain amount of characters.
I thought something like this would do the trick
Zip: IIf(Len([V_ZIP]<5),[V_ZIP],"0")
But I am getting a data type mismatch in criteria expression. Any ideas of what I am doing wrong?
Does anyone know the syntax to count the number of characters in a numeric field?
If not, how about counting the number of characters in a string?
I have a table with about 20.000 records.
From this table I would like to "search" in a column the field that holds the text with the most characters.
Is there a way to find this with a formula or expression?
I have a table with acct numbers of various lengths, ie:
246
18
36895
352119
472
I need to run a query so that all of the acct numbers are 8 characters long with zeros as placeholders in front of the actual acct numbers, ie:
00000246
00000018
00036895
00352119
00000472
I tried using the expression NewAcctNo: 00000000+[AcctNo], but that did not fix the problem.
How to match 4 character word or number or combination by identical 4 characters word or number or combination in one word have 10 or 15 characters.
I have to two separate tables (Table A and Table B). Table A has one column (Tag No) and Table B has about 15 columns with one column name Tag No as below
Table A
Table B
Tag No
Tag No
2009
ZZZ-2030-DC
2010
ZZZ-2010-M9P
[code]....
They're both in MS Access.I am trying to match 2 tables - columns (Tag No) with join query, but not success. I want to match 4 characters in Table-A with 4 similar characters in Table-B (Tag No) cell.What query is suitable to compare two tables.
I'm trying to limit the amount a user can enter into a employee discount field in a table. I would like to set up a validation rule in the table to limit the discount to no greater than $0.20 or 20 cents. Anyone have any recomendations? Thanks..
View 1 Replies View RelatedHello, I need help. I have two tables.
horse_entries
ent_HorseName (PK)
ent_entries
horse_information
inf_HorseName (PK)
inf_Ground
inf_Notes
It is a many-to-many relationship. When I open a table and enter a record there is a small + sign that allows me to open up the rows from the other table to enter directly into it. Can this be turned off? Also I can enter more than one record through this way. I only want one entry in inf_Ground, inf_Notes and inf_Entries for each HorseName. How would I do this? As you can tell I am completely new to Access and trying to learn. Thanks :)
Im doing a database booking system and i need to limit the amount of people to 160 per night. At the moment i have a query that sums up the bookings per date but i dont know how to then limit this column to 160.
View 2 Replies View Related