I have a main computer where my Access Application runs but I also want other computers with the application runnign on it but linked to the backend database on the main computer, however when linking to the tables they are only read only.
How do you link to tables accross the network so you can read and writ e to them?
Hi
I have a couple of acces databases running on a peer to peer network (database A and B, which are housed on PC1). The database B has a link to a Customer table in database A. This was running fine until another user on the peer to peer network wanted to use database B on their pc (PC2). I had to change the the file location of the linked table to show it's location on the network so PC2 could open it. Unfortunatley this greatly slowed the operation of the database B on both machines.
If anyone has made it this far - Is there any way round this?
Regards
David
I have a problem trying to improve performance on a database with linked tables across a network. I found in MS Access Help that you can do the following (see bullet below), but I have no idea how to use the OpenRecordset method. Can anyone give me an idea how to code this, or update the linked table with the information given below.
*You can greatly enhance performance when opening the main database and opening tables and forms by forcing the linked database to remain open. To do this, create an empty table in the linked database, and link the table in the main database. Then use the OpenRecordset method to open the linked table. This prevents the Microsoft Jet database engine from repeatedly opening and closing the linked database and creating and deleting the associated .ldb file.
I'd appreciate your help.
Thanks in advance,
JYMALY
I have a table that I imported from another database. I used import Access - Link to the table source by creating a linked table. - then downloaded in my database.
I want to use the linked table to create relationships and forms but do not want to even accidently edit it. The table gets updated in the database on a weekly bases and I am hoping it gets updated automatically in my database as well. does it automatically get updated or do i have to set up something?
Also, I want to protect the data in that particular table and either password protect it or make it read only. Can I do that? If so, how?
I have a small Access DB (multi-user) on a network that keeps turning into a read-only DB, with a message bar saying please save as . . . and it will not let you complete that. It seems to lock the application, and when I can get everyone out and copy the file out I can finally get it back to its normal state.
View 3 Replies View RelatedDoes a (the) .ldb file have to be closed for another user on a network (separate FE linked to network drive BE) to read/write info to a table? Or even select info from a table?
View 6 Replies View RelatedIs there a way to link MS Access tables as "read only" in Access2000?
Thanks,
SKK
Let's say I have a database saved in Folder 1. Is there a way for me to create a read-only copy of that database in Folder 2 so that it can be up-to-date with the changes made in the Folder 1 database? I am running Windows 7.
View 10 Replies View RelatedI have a database with a number of linked tables that are linked to tables in different databases (not a back-end).for example, I have table1 that is linked to table1 in K:databasedb1.mdb.table2 linked to table2 in S:datadata.mdb.and so on...
However, recently we have moved all our databases to a new location.
K:databasedb1.mdb is now residing in O:masterdatabase
and S:datadata.mdb is now residing in O:masterdata
and so on...
I'm now in charge of relinking all those tables to point to the new location.I would do this in linked table manager one by one but we have 100s of tables linked to multiple different databases in different location.is there a way to create a VBA code that will automatically do this re-linking process?
so,
1. find unlinkable tables
2. search its new location under O:master
3. re-link it to the new location
Database names and tables names have not been changed. Just the location of databases.
In my 2002 Employee table, I have a field which is a hyperlink to photos: C:photosemployee1.bmp (This is what I have entered into the Field as the Hyperlink)...However, from other PCs, I connect to this database and photo folder as a different drive letter, say Z, so when I am on the other networked PCs, and I click on the Hyperlink field, the data will not come up?
View 3 Replies View RelatedI am having trouble relinking tables in my Front End database to my Back End database. My BE DB is on a network share and when I try using the link table manager to navigate to the correct folder I get an error message upon entering the network share folder that says:
The Microsoft Access database engine cannot open or write to the file "etworkfolder" It is already opened exclusively by another user, or you need permission to view and write its data.
I have permission to the folder and have ensured that this folder is a trusted location path.
I believe I may have asked this question before but…
I have a FE/BE database. Is there a way to set the tables as “read only”? I’d like the FE to be read only, but allow users to see all the tables, not just forms etc. However, if they open the BE, they would have full control.
Thanks,
SKK
Is there a way to replicate NETWORKDAYS formula in Excel to Ms Access?
View 2 Replies View RelatedOk, what i have is a form on which a user has an Option Group for selection on which records are shown (consumable and Non-consumable), also on the form is a combo box which reads from Table Asset Categories. However what i want to do is allow this combo box to read from another table depending on which option is selected in the Option Group. ie change its Table and row source, but i can't figure this out. I thought something in the region of:
If Me.OptionGroup = 0 then recordsource = "Asset Categories"
Else RecordSource = "Consumable Categories"
End IF
Any Help Please
Hey all, I need data in a table to be read only, once its inserted no one will be able to modify with the exception of a admin,
how can i go about doing this/.
thanks!
can anyone plz tell me how to make a table read only to prevent users from changing the records in the table?
View 2 Replies View RelatedOk, what i have is a form on which a user has an Option Group for selection on which records are shown (consumable and Non-consumable), also on the form is a combo box which reads from Table Asset Categories. However what i want to do is allow this combo box to read from another table depending on which option is selected in the Option Group. ie change its Table and row source, but i can't figure this out. I thought something in the region of:
If Me.OptionGroup = 0 then recordsource = "Asset Categories"
Else RecordSource = "Consumable Categories"
End IF
Any Help Please
I have a Workorder table and a Workorder form. I would like to be able to make a Workorder closed when it is finished so that it is read only. I have a finished date field so maybe by entering a date there could be a way to accomplish this?
View 4 Replies View RelatedI define one Field in Table with 3 different Values form another Table. But now I dont know how to extract that values.
View 4 Replies View RelatedI've been tasked with coming up with a table structure that will allow me to make a form that lists the available static ip's in my various network range blocks (we have multiple off-site locations and use different ip ranges at each site).
I have the vision in my head of the form, you would select the block range from a drop down list, then see all the available addresses in that range. From there you could assign mark one as used and it is no longer listed on the form (I'm thinking a simple yes/no checkbox). What my co-workers would love to see is if there were entering a new PC assignment and put one of those available IP addresses into that forms record (different table too) then the ip would get deleted from the available pool as well.
Hello! My Small access aplication has a tables appended from dbf database program. I am coping with an issue to set access to this tables as read only.For me its very vital that source dbf application won't be changed from MS Access.Thanks for help!
View 3 Replies View RelatedI want to be able to open a Table as Read Only, so that a user can browse etc., but neither alter nor enter data - I want them to use the Forms for that. How then, using VBA code, do you open a Table as Read Only?
View 14 Replies View RelatedI am new to Access, so bear with me.
I am using Access 2007.
I have 4 tables created, and they are breaking out information for recording files that are being created from a PBX.
The tables are created as thus:
tbl_1
Key:ext_id | extension
tbl_2
Key:loc_id | location
tbl_3
Key:f-type_id | filetype
tbl_4
Key: mass_id | filename | date | loc_id | ext_id | f-type_id
Now I have created the relationships between the tables for the various ID's. My issue is the following:
I will be automating this process, so when the data is imported to the various tables, I need the relevant keys from tbl_1 tbl_2 and tbl_3 to be added to tbl_4 when the new data is brought into the tables.
As to the process of importing the data, I was looking at using PHP to facilitate this. Any ideas, help or direction would be greatly appreciated. I have looked around the net for an idea of how to solve this, but, being so new, I am not exactly sure how to word the question.
Thanks!
Was wondering how i can import data from a file to a table in different fields. The data inside the file is described with the number of characters and space's between. The attached file has the data.
For example in the file attached, the first four characters represent a data like 'ticket number' and maybe the third line 6 to 10 charcaters represent 'name of a passenger'.
Now how do i import these data to a table into respective fields in a table.
I have developed a Microsoft Access 2010 database for my client and the database is split with Front-end/Back-end, the Back-end and the database is shared on Network, The client operating system and applications for all users are hosted and consistent and the service is delivered over Citrix.
The database some times corrupt the tables record and give a permanent #Delete Error, I have attached one of the database table and the screenshot of the error,
I have split database (B/E is in the SharePoint library, F/E has users on a local PCs). Sometimes, when I update/add data (does not matter if it is via form or directly in the table) it looks OK, but when I re-open the database, the data are gone.
Problem is that I cannot catch the moment when data were not saved (sometimes data are saved, sometimes not). I can point out this: if I re-enter the missing data, primary key continues subsequently, it looks like the data have never been entered. I tried to use script
Code:
If Me.Dirty Then Me.Dirty = False
on "On Close" form event, does not work.
B/E is linked by VBA code and it looks OK (no error, Link Manager shows correct path). I suspect interrupted connetion to the SharePoint but I don't know how to check it. I implemented VBA script co keep open connection to the SP but the issue persists.