ListBox Removing Filter
Mar 29, 2008
I'm stuck
I have List box called 'lstNote' base on a query 'qryNotes' with filter tied to textbox 'filter' on my main form 'frmNotes'. The filter specifies criteria for field called 'ntype' on 'qryNotes'.
I have buttons that change the filter field to specific criteria. The listbox works fine this way for filtered records.
I want to also be able to not have any filter for the 'lstNote' so that all records for 'qryNotes' are listed without criteria.
I tried, but was not successful, to set the filter criteria to a wildcard or no filter with
IIf(IsNull(Forms!frmNotes!filter),(qryNotes.nType = Like *),Forms!frmNotes!filter)
But this produces no records at all.
Any suggestions? Do I need to go down another road?
Basically I want to listbox to either show any of the filters and also all records.
View Replies
ADVERTISEMENT
Jun 21, 2005
i have a form porblem. I have a search form embedded onto my main form its really a listbox that when i click the records in it they display the record.
prob;em is that when i delete the record it still shows in the listbox
View 1 Replies
View Related
May 25, 2006
Hi there, I currently have a search subform that will search for a specific record based on an ID or Name. However I do not want all the records to be filtered. I still want the user to be able to traverse through the other records.
Is there any way that I can disable the filtering?
thanks
View 1 Replies
View Related
Feb 10, 2014
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code:
'Purpose: This module illustrates how to create a search form, _
where the user can enter as many or few criteria as they wish, _
and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
View 2 Replies
View Related
Oct 10, 2005
Hi all,
In form I have listbox. I need show in listbox only filtered records.
For example, I have 20 records in form, listbox shows 20. I make some filter in Form, Form shows 10 records - 10 records must show listbox too.
How can I make it?
Thank You in advance for answers.
View 3 Replies
View Related
Jun 2, 2005
Hi,
I have a table with training records. Each attendee is listed with date and the related document he was trained on.
Now i want to make a listbox where the user can choose between the different dates of the trainings. Now when several people where trained on the same day, i get some dates back multiple times in my listbox. When you had 100 on the same day, 100 times the date in that listbox. Is there a way to filter out the same dates and show each date only one single time in my listbox?
Thanks
View 4 Replies
View Related
Dec 21, 2005
I have a form called “frm_TrainingLog” based on “TrainingLog” table. This form is continuous and tabular – I need to have it this way. In the header of this form I’ve created a listbox called “QuickSearch” which displays staff details i.e. StaffID, Name etc.
The mainform and the listbox are linked using the following code:
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "[StaffID] = " & Str(Me![QuickSearch])
Me.Bookmark = rs.Bookmark
The above code does partially work and selects the right record in the mainform but it doesn’t filter out rest of the records which are not equivalent to selected StaffID from the listbox.
I could really do with someone’s help….thanks
View 2 Replies
View Related
Mar 2, 2005
Hi there
This im sure is a easy question but I am just trying to learn access so I am having a few problems.
I have made a form that contains 2 comboboxs and a listbox.
How can I use the 2 combobox to filter a table and to place the information into the listbox.
Is it possible to use either 1 of the combo boxes or both to get the filtered result.
Any suggestions would be great!!
TIA!
View 2 Replies
View Related
May 13, 2014
Now I have coded what I think should work for my listboxes and it does not. When I click it does nothing. No processing of anything.
I have 11 multi-listboxes and want to collect what the user selects from each one and then use it to run my query. The query only uses 4 of the listbox items and then 4 other items that I have in the query. I want to be able to display this in the same form or perhaps a subform. Here is my code:
Code:
Private Sub command8_click()
' Update the record source
If BuildFilter = "" Then
Me.frmQual_Sub.Form.RecordSource = "select * from qualq1 where " & BuildFilter
End If
[Code] .....
View 2 Replies
View Related
Jul 26, 2013
I wish to filter the records in a listbox by using checkboxes.
The listbox (list1) and the checkboxes are in the same form (form1)
The listbox displays the records from a query (query1) related to a single table (table1).
Each record (assuming a list of videos) has a field called "Typology". The "video typologies" are: Movie, Documentary, Animation. So the table1 has a column called "Typology" which displays one of the three typology in simple text.
When entering a new record (in a specific form) user can choose the typology selecting an option in a combobox. The combobox is a "value list" one and I wrote the typologies in the "row origin" line:
"Movie";"Documentary";"Animation"
So we have a single column in simple text for all the typologies, but limited choiches.
So far everything is working well.
Now I wish to filter the records in the listbox by typology. Each typology should be related to a checkbox, so when I check a checkbox then the listbox returns only the records form a specific typology. Also, I wish to check more then one checkbox in order to display records from multiple typologies rather than one.
I've already made a button which resets the form, displaying once again all the records and eventually unchecking all the checkboxes.
About option buttons: I've managed filtering the listbox results using option buttons in a frame (option group?) and it works fine, but in this way I can choose only one typology at a time (and the typology field in the tabel1 of course is not simple text, but numeric: 1=Movie, 2=Documentary etc).
I thought this could be solved using the click event on each checkbox:
-If the checkbox "Movie" is checked then the listbox shows only the records which have the text "Movie" in the Typology field. Else, show all the records.
-If the checkbox "Documentary" is checked then the listbox shows only the records which have the text "Documentary" in the Typology field.
Etc......
View 11 Replies
View Related
Jul 27, 2006
Dear All,
I am just starting out in Access Development. I have a database that runs a logistics department. This was working fine until the users wanted a little more tweaking.
The report prints out the vehicles with all corresponding drops. This comes out all on sheet.
Is there a way that I can create a form to filter the report via a multi select listbox and print each drop selected on a seperate sheet of paper.
I am using Access 2003
Many thanks for any help or source code given
View 3 Replies
View Related
Nov 27, 2006
Hi
I have a form which displays records of our products, on that form I have now put a list box which displays the ancillaries to the products.
both the form and the list box run off queries.
I have the same unique identifiers in both queries.
I need to filter the listbox by the unique identifier every time I move record.
At the moment the list box stays populated with all the ancillaries, how do I filter it programatically to list only the ancillaries with the same unique identifiers as in the current record?
Thanks a million....
View 6 Replies
View Related
Feb 18, 2015
I am trying to get my VBA to filter the subform, as currently it does nothing! I have copied it from a source on another forum and at the end of the VBA it originally opened up the query.
However I am trying to tailor this query so that instead of it opening the query I can have a datasheet on the form that displays the filtered records..
There are 3 multiselect listboxes
Here is my code
' This code uses ADO and ADOX and is suitable for Access 2000 (and later).
' A reference must be set to Microsoft ADO Ext. 2.7 for DDL and Security.
Private Sub cmdOK_Click()
Dim cat As New ADOX.Catalog
Dim cmd As New ADODB.Command
Dim qry As ADOX.View
[Code] ....
View 5 Replies
View Related
Jul 29, 2013
So i have a form with 3 fields. (This is just a test form/table):
ID: autonumber
Fullname: text field
Last4: number field
I have the following code:
Code:
DoCmd.OpenForm "test", , , "Id = '" & Me.List14 & "'"
It keeps giving a mismatch error. How do i get it so I can use the autonumber to filter the form?
Code:
DoCmd.OpenForm "test", , , "Fullname = '" & Me.List14 & "'"
When I do this it works just fine.
View 3 Replies
View Related
May 31, 2013
I am currently working on a form for my users to look at budget data. I have several listboxes for them to filter queries by. What I was wondering is, if it is possible to have data in one list box be filtered by the preceeding listbox?
For example: Three list boxes: Report_Period, Budget, Dept.
Each list contains all the values possible. This data is all in a filter table (and the listboxes created using SELECT DISTINCT queries to that table for the specific field). So, if I select Budget XYZ, could I filter the Dept listbox to only show the dept.'s associated with that budget? These are all multi-select listboxes by the way, so budget ABC and XYZ would only show the departments associated as well.
View 8 Replies
View Related
Feb 24, 2014
I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
View 7 Replies
View Related
Nov 29, 2013
The main form has textbox & a Listbox with which I filtered a datasheet inside a sub form. Everything worked fine only the listbox [Discipline] is not working !! it cuase Run-time error: 3831 - The multi-valued field "[Category]" cannot be used in a WHERE or HAVING clause.
So how do I filter a multivalued Listbox field [Discipline] ?
Private Sub cmdSearch_Click()
'On erorr GoTo errr
Me.tblFLM_subform1.Form.RecordSource = "SELECT * FROM tblFLM " & BuildFilter
Me.tblFLM_subform1.Requery
Exit Sub
errr:
MsgBox Err.Description
End Sub
[Code] .....
View 1 Replies
View Related
Oct 24, 2013
I have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?
View 2 Replies
View Related
Jun 6, 2014
I have a listbox where the rowsource is a SQL statement. I didn't know if I should try that or just use a query for what I am doing. The listbox is based on our client table, which is a huge number of people, and is showing 3 out of 5 fields.
I have two text boxes, one for first name and one for last name.
I would like the listbox to filter as I search by either field OR by both. Right now, I have the on change event for each with a SQL statement with a Like '*" & Me.textboxname.text & "*' and then a Me.clientlist.rowsource= at the end. So I can get each text box to filter the listbox individually, but I can't get it to filter with both. I think it is a matter of the focus changing, but I could be wrong.
View 9 Replies
View Related
Oct 10, 2014
I'm using pbauldy's code to filter a report by a multi-select listbox. The only issue is..how do I include more (7 to be exact) listboxes to the code? It seems the OpenReport vba is only allowing 1 where clause?
Code:
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'add selected values to string
Set ctl = Me.VP_ListBox
[Code] .....
View 7 Replies
View Related
Jul 13, 2015
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
View 7 Replies
View Related
Jun 14, 2013
I have a form in which users can enter data in several textboxes to filter the listbox below it, this works great except for the fact that when a record lacks certain data it doesn't show up
Basically there are 4 filters, one for the name/id which works great, as the entries without id's show up just fine but this filter needs to be checked against the other 3 filters, for their group, education and type.
Lets use group as an example.
When a student has no group it should only show up when the group filter is an empty string. AFAIK the wildcards should see to that.
Currently however, when a student has no group, it doesnt show up at all unless I remove the | Like '*' & [groepFilter] & '*' | part from the query.
I've never used complicated WHERE's like this so it might be something very simple. I think I could get it to work using VBA and modifying the rowsource of the listbox from there but this would be a lot easier and I'm curious as to why this doesn't work.
The SQL:
SELECT Student.Studentindex, Student.studentid, Student.studentvn, Student.studenttv,
Student.studentan, Student.Groepcode, Opleiding.opleidingsnaam, Opleiding.type
FROM Student LEFT JOIN Opleiding ON Student.opleidingid = Opleiding.opleidingid
WHERE (((Student.studentid) Like '*' & [naamFilter] & '*') AND ((Student.Groepcode) Like '*' & [groepFilter] & '*')
[Code] ....
View 2 Replies
View Related
Jul 14, 2015
I am using two combo boxes to filter a list box with the code below. The combo boxes work, but when the form opens, the list box is empty until it is filtered using the combo boxes.
I want the list box to return all records when no filter is applied.
Here is the code:
SELECT Q_Gender_Statistics.ParticipantID, Q_Gender_Statistics.Gender, Q_Gender_Statistics.Date,
Q_Gender_Statistics.Year, Q_Gender_Statistics.[First Name], Q_Gender_Statistics.[Last Name],
Q_Gender_Statistics.[Other Names], Q_Gender_Statistics.[Passport No], Q_Gender_Statistics.[Duty Station], Q_Gender_Statistics.[Contact Number] FROM Q_Gender_Statistics WHERE (((Q_Gender_Statistics.Year) = Forms!F_Gender_Statistics!cboYear) AND ((Q_Gender_Statistics.Gender) = Forms!F_Gender_Statistics!cboGender)) ORDER BY Q_Gender_Statistics.Date DESC;
View 4 Replies
View Related
Feb 17, 2014
I use the follwing code to filter a report based on the listbox selection on a form. Below is the code I use, the problem it will error if the results have an apostrophe in the string.
Private Sub FilterDesc_Click()
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
If Me.ListCarrier.ItemsSelected.Count = 0 Then
MsgBox "Must select at least 1 Carrier"
[Code] ....
View 7 Replies
View Related
Apr 21, 2006
Hi, I'm new here, so I hope I'm posting this in the correct place. I've searched the forum to see if there are any existing threads that might help me, but I've not found anything that does...
(I think this thread ( http://www.access-programmers.co.uk/forums/showthread.php?t=93444&highlight=Copying+data )may be trying to achieve something similar to me, but I'm a beginner and don't really understand it)
I shall stop waffling! I'm not entirely sure that what I'm trying to achieve is possible, I expect it probably is!
Right, I have a form (frmGroupRegister, which contains exactly the same fields as the table it comes from, tblGroupRegister), which consists of three things:
-GroupDate - The date a group took place on. It is my primary key, as no more than one group occurs on a specific date.
-ParentList (A listbox which contains a query showing the ID number, forename and surname of everyone in a table, tblParentDetails)
-ParentsAttending (A blank listbox)
I would like to place buttons in between the ParentList and ParentsAttending, which would allow users to conduct a 'register' of attendance by copying individual/multiple details from ParentList into ParentsAttending (much like you get when choosing which fields to include in a form when using a wizard for example). I would also like them to be able to remove people from ParentsAttending by using a button in case of accidentally adding the wrong person into the ParentsAttending box.
I'm aware that another, probably simpler way of achieving this would be to use a tick-box system, but I feel that visually, the first method would both look better and demonstrate who is present more clearly.
Any help would be much appreciated, but my Access skills are quite basic and things will probably need to be spelled out for me.
I'm using Access 2000 and Windows XP.
Thanks for your help,
Alice :)
View 1 Replies
View Related
Jun 10, 2015
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1
FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION
WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate()
'Dim LocQryStr As String
'Dim r As Integer
'Dim ctl9 As Control
'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
View 5 Replies
View Related
