I have a form (all_trucks) with a listbox (qryNames). The values of the Listbox are Query Names. When I click on of of the Query Names in the Listbox it runs the Query.
I have created a table of nothing but Query Names. What I want to do is for the Listbox to show the Query Names in the Query Names Table and then run the query from the Listbox whenever I select the Query Name.
I do not know how to make the ListBox access the Query Names Table and then execute the Query when it is selected in the Listbox.
inserting values from a listbox in to a table. I have a table with a field named: PrefReports. This field will hold data from values in a list box that the user selects.
Table: Profiles Field Name: PrefReports Type: Memo
The user utilizes a form to input the values necessary for the query. I then have the query tied to a command button. When the command button is clicked, the query is executed.
How can I take what the user selects in the list box, and insert into my TblProfiles.PrefReports field? When I run the query, all other information makes it to the table except the list box values.
Can anyone help me out on how I can create this? I can create a button to activate a query but would like to create a listbox with a list of queries within it, highlight the query, press the button and the queries selected will run.
The query below is supposed to accept some characters from the user and bring up a list of records satisfying the criteria. TelephoneAAA is a table with many columns. The query does not give any error message receives input from user runs quietly and does not give any result. I know that the table contains sufficient data. Probably I am missing something obvious but what.
Code: RowSourceQy = " SELECT * from [TelephoneAAA] " & _ "WHERE (([TelephoneAAA].[SOYADI]) Like ((' * ')+ [Word] +(' * '))) OR " & _ "(([TelephoneAAA].[ADI]) Like ((' * ')+[Word]+(' * '))) OR " & _ "(([TelephoneAAA].[ADRES]) Like ((' * ')+[Word]+(' * ')))" & _ "ORDER BY [TelephoneAAA].[SOYADI], [TelephoneAAA].[ADI], [TelephoneAAA].[TEL];"
I am currently working on a form for my users to look at budget data. I have several listboxes for them to filter queries by. What I was wondering is, if it is possible to have data in one list box be filtered by the preceeding listbox?
For example: Three list boxes: Report_Period, Budget, Dept.
Each list contains all the values possible. This data is all in a filter table (and the listboxes created using SELECT DISTINCT queries to that table for the specific field). So, if I select Budget XYZ, could I filter the Dept listbox to only show the dept.'s associated with that budget? These are all multi-select listboxes by the way, so budget ABC and XYZ would only show the departments associated as well.
Here's a link to a post with background (see the relationships image at the top): [URL] .....
So I got everything to work exactly as I wanted it to.. the listbox has its rowsrc manually changed via VB on form open or record change... so everytime the record changes or the form opens, VB creates a query string that pulls the TFE_Num and TFE_Name from the DB for only those records where the forms current key (me.key.value) equals the TFE_key values. And everything works.
The problem is that this VB based query is very slow... so everytime the record changes, we wait 1-5 seconds for this listbox to pull data and display it. My question is this: Is there a better way to do this, some way that doesn't require VB based SQL statement. I'm asking because all the non-listbox controls on the form use a control source and they get updated instantaniously on form open or record move, but the list boxes that are unbound and are populated using VB SQL are really slow... and there are really only 1 or 2 records ever displayed in the list box.
I have tried to set the rowsource for the list box within the properties tab and comment out the VB SQL code, but haven't succeeded. I suspect the issue is that the form is linked to all fields in the master table while the list box is linked to a 1st and 2nd generation child table... I just can't get it to work! I've tried simple adding the TFE tables and fields to the forms record source poperties, but when I do that I can only navigate to records that have TFEs associated with them.
I suspect I could resolve the issue myself, if only access queries allowed "me.key.value" to be used in the WHERE statement. Am I correct that you cannot do this in Accesses query builder or the SQL version? When I tried, it worked but then I notices the me.key.value got converted to a number (the first record) when it ran the first time.
I would like to have the user select one or more values in a list box, and use those values as criteria in a query. Then the query will be used as a source for list boxes in another form based on the values of the previous selection.
Example:
User selects options 1, 3, and 4 from the list box on Form A. The query then sets the criteria to anything related to 1 OR 3 OR 4. Then in another form, Form B, all the data tied to option 1 is in its own list box, all the data tied to option 3 is in its own list box, and all data tied to option 4 is in its own list box.
I wish to generate a new query consisting rows that I have selected in a multi colum list box. May I know if it is possible to work? I am totally lost now
I've filtered a listbox query between two dates selected by a user through an unbound text, however the listbox only changes after you click it. I've requeried it after someone updates the 2 unbound date textboxes, yet it still doesn't work.
I have a problem with a listbox that uses a querie to show posts. In the header of the listbox the fieldnames is showed like: tblTable.Object instead of only Object.
In the querie there are two fields that has the same name. Object from tblTable and Object from tblObjects, I think thats where the problem could be.
I have an access form which i have turned of menus, navigation and shift key. What I am looking for is to have buttons on my form to allow users to create and delete queries from my form. I already have a listbox that shows all the queries and runs them when a user double click on them.The codes needs to run in access 2007-2013 in both 32 & 64 bit versions.
I have a form where I am trying to use 4 combo boxes(nomenclature,BPN,vendor, and reference) to filter a list box containing part numbers. The way I have it set up right now is in the listbox it is searching for each field and then in the criteria section i have [Forms]![myform]![respectedFieldsCombo].
This works when selections are made from the combo boxes but when one is blank (not being used to filter) then I assume it passes null for that value and the listbox doesn't return anything. I have tried to make it so the listbox ignores null values but im still having this problem.
For example: If i only have a selection for the vendor combo box then i want the list box to show all respective part numbers for that vendor, where nomenclature or any of the other fields are irrelevant. I also want to be able to stack these filters upon every new combo box selection.
I have a form in which users can enter data in several textboxes to filter the listbox below it, this works great except for the fact that when a record lacks certain data it doesn't show up
Basically there are 4 filters, one for the name/id which works great, as the entries without id's show up just fine but this filter needs to be checked against the other 3 filters, for their group, education and type.
Lets use group as an example.
When a student has no group it should only show up when the group filter is an empty string. AFAIK the wildcards should see to that.
Currently however, when a student has no group, it doesnt show up at all unless I remove the | Like '*' & [groepFilter] & '*' | part from the query.
I've never used complicated WHERE's like this so it might be something very simple. I think I could get it to work using VBA and modifying the rowsource of the listbox from there but this would be a lot easier and I'm curious as to why this doesn't work.
The SQL:
SELECT Student.Studentindex, Student.studentid, Student.studentvn, Student.studenttv, Student.studentan, Student.Groepcode, Opleiding.opleidingsnaam, Opleiding.type FROM Student LEFT JOIN Opleiding ON Student.opleidingid = Opleiding.opleidingid WHERE (((Student.studentid) Like '*' & [naamFilter] & '*') AND ((Student.Groepcode) Like '*' & [groepFilter] & '*')
I am using two combo boxes to filter a list box with the code below. The combo boxes work, but when the form opens, the list box is empty until it is filtered using the combo boxes.
I want the list box to return all records when no filter is applied.
Here is the code:
SELECT Q_Gender_Statistics.ParticipantID, Q_Gender_Statistics.Gender, Q_Gender_Statistics.Date, Q_Gender_Statistics.Year, Q_Gender_Statistics.[First Name], Q_Gender_Statistics.[Last Name], Q_Gender_Statistics.[Other Names], Q_Gender_Statistics.[Passport No], Q_Gender_Statistics.[Duty Station], Q_Gender_Statistics.[Contact Number] FROM Q_Gender_Statistics WHERE (((Q_Gender_Statistics.Year) = Forms!F_Gender_Statistics!cboYear) AND ((Q_Gender_Statistics.Gender) = Forms!F_Gender_Statistics!cboGender)) ORDER BY Q_Gender_Statistics.Date DESC;
Hi All, Apologies if I'm posting in the wrong forum. Not quite sure whether this should be in tables or forms.
My question is, I have two tables, one containing general data and one containing data used to populate a listbox. I want the selected value in the listbox to be used to populate the corresponding field in the other table but my users want to be able to tab through the entry form. If they tab over the list box without actually selecting a value, the table is not updated with the listbox value. How can I make this work?
I'm preparing a query as the control source for an unbound listbox. The following code gives the desired results:
Code: SELECT DISTINCT tblCameras.CameraNum, QrySbfShotList.CamerasFK FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID WHERE (((QrySbfShotList.shootsFK)=[my].[control])) ORDER BY QrySbfShotList.CamerasFK
(My.control will be a control on the form. For the time being, I let the query prompt me for a value.)
It produces two columns like so:
CameraNum Camera ID 1 2 2 3 3 4 4 5 5 6 6 7 8 9 11 12
CameraNum is text; CameraID is numeric.
Now, I'm trying to use a trick I read about that should add a single textual entry to the top of the list like so:
Code: SELECT DISTINCT tblCameras.CameraNum, QrySbfShotList.CamerasFK FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID WHERE (((QrySbfShotList.shootsFK)=[my].[control])) ORDER BY QrySbfShotList.CamerasFK
union
SELECT "(ALL)", "Dummy" FROM QrySbfShotList INNER JOIN tblCameras ON QrySbfShotList.CamerasFK = tblCameras.CamerasID WHERE (((QrySbfShotList.shootsFK)=[my].[control]));
This produces
CameraNum Camera ID ALL Dummy 1 2 11 12 2 3 3 4 4 5 5 6 6 7 8 9
The second (numeric) column is now out of order. This is reproducible for other values of my.control. If there are double digit entries they get inserted at the third row.
Why? What am I not understanding about how UNION works?
(BTW, I know I could put the "ALL" entry into tblCameras, thereby avoiding the need for a union, but I'd still like to know why the unexpected result.)
This must be pretty common but I cann't figure it out.
There is a listbox that multiple selections are allowed. This listbox is bounded with a table field. All selections must be stored. I don't mind if each selection is stored as a different record.
I am trying to figure how to do the following with a listbox On my Form I have a list box that shows my users a distinct list of items from a "master" table that they can select and add to their own user defined table that is used as a filter for a number of reports and queries
As long as I have only 1 column in both - I can get the following code to work
DoCmd.SetWarnings False Dim Criteria As String Dim ctl As Control Dim Itm As Variant ' Build a list of the selections. Set ctl = Me.lstProjectLists For Each Itm In ctl.ItemsSelected DoCmd.RunSQL "Insert into my_project values ('" & ctl.ItemData(Itm) & "')" Next Itm DoCmd.Requery Me.Refresh DoCmd.SetWarnings True
What I would like to do is expand my list box to contain more than 1 column and when the user selects from my master list to populate theirs - I want to copy the entire row over.
Example of what I am looking for On a form I want to have a list box that contains Project No (column1) and Description (Column2) - when a user selects a row and clicks on a command button (code sample from above) to "populate" the selection into their list - I want both columns to be copied into thier table "my_project" .
I have a table of customers and have table of stuff they can buy. Those two tables I use in the next table where their ordes get registred. I have and order form where I have a listbox. When I create a new order I want to have the customersname in a listbox but I want the customersID(primary key) returned in order table. How do I do that? :confused:
I have a list box on a form which uses the following SQL to pull the list items from a table :
SELECT DISTINCT tblMyTable.MyField FROM tblMyTable ORDER BY tblMyTable.MyField;
For some reason, during testing, the first two items on the list are blanks. I am quite happy for one blank to be returned at the top of the list (as this would easily identify for the user any records for which this field has not yet been completed, which is a good thing) but I can't understand why it would appear twice?
Why doesn't the DISTINCT command ensure any blank entries only appear once?
Incidentally, I have a subform which populates on the back of selections from the list boxes, so I can quickly see the corresponding records which generate these blanks. What's puzzling me is that the same records show for both blanks on the list - suggesting it is the same value repeating itself (and not, say, "" vs " ", for example, which was what I originally suspected...)
I have a products form, we are a manufacturing company, with a listbox to show recent inventory transactions. This is based on a query which shows all transactions with the current part id, and that all works well and fine.
The problem is, I would like to limit this query to show only the last 10 transactions in the listbox and not make it editable, ie not enabled. I set the show only in query design view to 10 and it says in the sql statement select top 10, however, the listbox consistently shows all related records. What am I missing?
Hi, I'm new here, so I hope I'm posting this in the correct place. I've searched the forum to see if there are any existing threads that might help me, but I've not found anything that does... (I think this thread ( http://www.access-programmers.co.uk/forums/showthread.php?t=93444&highlight=Copying+data )may be trying to achieve something similar to me, but I'm a beginner and don't really understand it)
I shall stop waffling! I'm not entirely sure that what I'm trying to achieve is possible, I expect it probably is!
Right, I have a form (frmGroupRegister, which contains exactly the same fields as the table it comes from, tblGroupRegister), which consists of three things:
-GroupDate - The date a group took place on. It is my primary key, as no more than one group occurs on a specific date.
-ParentList (A listbox which contains a query showing the ID number, forename and surname of everyone in a table, tblParentDetails)
-ParentsAttending (A blank listbox)
I would like to place buttons in between the ParentList and ParentsAttending, which would allow users to conduct a 'register' of attendance by copying individual/multiple details from ParentList into ParentsAttending (much like you get when choosing which fields to include in a form when using a wizard for example). I would also like them to be able to remove people from ParentsAttending by using a button in case of accidentally adding the wrong person into the ParentsAttending box.
I'm aware that another, probably simpler way of achieving this would be to use a tick-box system, but I feel that visually, the first method would both look better and demonstrate who is present more clearly.
Any help would be much appreciated, but my Access skills are quite basic and things will probably need to be spelled out for me. I'm using Access 2000 and Windows XP. Thanks for your help, Alice :)
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1 FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate() 'Dim LocQryStr As String 'Dim r As Integer 'Dim ctl9 As Control 'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
I have a list box called "product list box" based on a query called "searchqry", i also have another listbox called "type list box" , how do i get the type list box to only show "types" based on the section in products list box?
