Been away from access db's for a couple of years and have suddenly job i have to do, and of course the client wants it finished yesterday :rolleyes:
Anyway, my problem is that i have a simple form with suppier details in it - and a combo box which shows the products that that supplier has. The combo box runs on a custom query object i created that matches the supplierID's. Simple!
But for some reason when i change the supplier record, the combo box doesn't with the new list of products. The dynamic QUERY updates just fine, if i check it, however these results aren't reflected in the listbox.
If i use a subform, then that updates just fine. Alas, not the list box, though.
I must be forgetting something simple! Is there some kind of update event i have to create?
I have a form with a listbox in it. I want the listbox to update as the record changes.Let me get a little more in-depth...The form will be used to identify merchandise that exists in the company to fulfill current POs.
What I want is for the listbox (which displays Store Locations) to update when the PO# updates on the form (so as the record changes).Currently, the listbox only pulls all the store locations no matter if you hit next record to get a new PO.The two main fields I am working with are PO# (text box) and Store Locations (the listbox).How can I get the listbox to update as the record changes on the form?
I have a table with a multi-select listbox as one of the fields. I want to loop through the recordset (table) and changes the listbox selections for each record.
To go into a little more detail, the table (tblEmail) has a field (Label) that is a multi-select listbox. The listbox pulls from another table (tblLabel). I want to loop through records in tblEmail and edit/change the Label(s) for each email though VBA.
I've tried doing something like this:
Code: With rst .MoveFirst Do Until rst.EOF .Edit !Label.Selected(0) = True .Update Loop End With
However I get an error that says "Run-Time Error '438' Object doesn't support this property or method" ...
I've got this multiple select listbox which writes data into a textbox:
Private Sub List2_AfterUpdate()
Dim Cursisten As String Dim ctl As Control Dim Itm As Variant
Set ctl = Me.List2
For Each Itm In ctl.ItemsSelected If Len(Cursisten) = 0 Then Cursisten = ctl.ItemData(Itm) Else Cursisten = Cursisten & "," & ctl.ItemData(Itm) End If Next Itm Me.txtCursisten = Cursisten
End Sub
And I've got a SELECT ALL button to select all records in the listbox:
Private Sub cmdSelectAll_Click() On Error GoTo Err_cmdSelectAll_Click
Dim i As Integer
If cmdSelectAll.Caption = "Alles Selecteren" Then For i = 0 To Me.List2.ListCount Me.List2.Selected(i) = True Next i cmdSelectAll.Caption = "Alles De-Selecteren" Else For i = 0 To Me.List2.ListCount Me.List2.Selected(i) = False Next i cmdSelectAll.Caption = "Alles Selecteren"
The only thing is that when I use the SELECT ALL button, the function List2_Afterupdate doesn't work anymore. There must be a simple solution but I just can't figure it out. Can anyone please help me?
I have a table called tblCompanies. When a company acquires another company, I need a method by which the acquired company's CompanyID (PK) can be updated to the new company's CompanyID (PK). I also need to be able to update all related CompanyIDs (FKs) to the new value in related tables.
In cases in which the new company does not have an existing record, there is no problem: the company name simply gets changed to the new company and the existing CompanyID is maintained. I then use an audit table and Track Changes function to keep track of the company name data and a union query to keep the old names in the selection lists.
The problem is when both companies already have existing records in the table.
So, let's say I have records for Company A and Company B. Company A merges with Company B and Company B is now the main record. What is the best, simplest and easiest way to update the CompanyID (PK) from A to B and change the CompanyID (FK) to the new value in all related tables?
I am envisioning a pop-up form that directs the user to select the new company and then an update query happens behind the scenes... but exactly how does the criteria for the update query get selected and how do all the related tables get updated? My vba skills are pretty basic, will I need extensive coding to do something like this?
I have a problem in linking the forms. I have a form called FORM1 and i have 2 comboboxes there. Now I have also a listbox in the same form and in this case I need to update the values in connection with the values that are given in the combo boxes. Can anyone say me how the updates are done automatically in the listbox.
I have been looking for days on the net for my listbox problem. It is there and found a few, even on this forum. but when i try the solutions mentioned i am in a total loss and do not know what to change to make it work for me.
I have a form named A/B Retriever with a record source qry input AB Bins Than i have a unbound combobox with row source qry input AB Bins. This populates 8 textboxes with B through I carton boxes, stored in a bin. The user selects a Bin location from the combobox and can put a "x" in a textbox to illustrate that the box is empty. This works perfect.
Underneath the input bin and box part i have 8 listboxes that shows a query that has counted the empty boxes with the corresponding bin location. this also works. but the question from users where, If i click on a, lets say empty B-box at Bin location 12A20, they want the combobox automatically focus on the combobox with the corresponding Bin location. This is a quick way for them to delete a empty box (remove the X).
Im running an update query but in the criterial field i would like to include something that instructs the query to be executed only on the value selected in my listbox.
i need some help with the syntax cause i dont know how to bound the query's execution to the selected/highlighted value in the listbox.
I have a query which returns names to a listbox. The query works by a Command Button and 'Requerys' by using the Command Button. But, I cant get the ListBox to refresh on a Requery. All it does is add results of the Requery to the bottom of the list. I'm obviously missing something basic....any ideas?
I am trying to figure how to do the following with a listbox On my Form I have a list box that shows my users a distinct list of items from a "master" table that they can select and add to their own user defined table that is used as a filter for a number of reports and queries
As long as I have only 1 column in both - I can get the following code to work
DoCmd.SetWarnings False Dim Criteria As String Dim ctl As Control Dim Itm As Variant ' Build a list of the selections. Set ctl = Me.lstProjectLists For Each Itm In ctl.ItemsSelected DoCmd.RunSQL "Insert into my_project values ('" & ctl.ItemData(Itm) & "')" Next Itm DoCmd.Requery Me.Refresh DoCmd.SetWarnings True
What I would like to do is expand my list box to contain more than 1 column and when the user selects from my master list to populate theirs - I want to copy the entire row over.
Example of what I am looking for On a form I want to have a list box that contains Project No (column1) and Description (Column2) - when a user selects a row and clicks on a command button (code sample from above) to "populate" the selection into their list - I want both columns to be copied into thier table "my_project" .
I have a form that student grades on. I use a listbox to pick the names. I also have a pop up form for me to enter new students that are not in the pop up "query" form. I can go to my form with the grades and hit a refresh button and the listbox is updated. I would like for my data to be requeried and up to date when I close the pop form. Any suggestion.
I have a form with several fields bound to a table, and also a listbox of records that are not bound to any table. What I want to do is to be able to double-click a record in my listbox and have the record show up on my form in a particular bound field, and also become a part of the underlying table's record.
Is it possible to do this? If it is, how would I do it?
I've a form with comboboxes and listboxes on, which populates a table with data. The cbo or lbo are bound to the relevant table field.
Unfortunatley, there is one lbo that just wont update the relevant table field. I've tried lots of different settings and etc, following advice reseacrhed from these forums.I've even tried copying an lbo that does work, all with no luck.
Has anyone ever had similar experience? If so, how do I get out of it?
I need to create a form to Add/Update into SMaster and SI_map tables, which has one-to-many relationship, that's why I use a list box to show the values from SI_map.
in SMaster [ Sid, other fields ] in SI_map [ primary key, Sid, ILookupid ] in ILookup [ ILookupid, IName ]
questions: 1. How to get the multi-selected values from the list box? 2. insert these multiple records into SI_map table at the same time with SMaster (if I use the same form to populate all these fields) 3. how to populate the records into form for user to see and update the values?
Any suggestion is appreciated, it is very flexible to change any format such as SMaster and SI_map can be separate forms, as long as it works.
I have 2 forms: frmExcEntry and frmItemSearch. frmExcEntry is a data entry form where the associate enters PO#, Item#, Qty, etc. frmItemSearch is a popup form that is used to narrow the search of the Item# from frmExcEntry. Right now, when the associate types the Item# (either PartNo or FactNo)in the txtItemNo control on frmExcEntry, frmItemSearch opens (frmExcEntry remains open) with all potential item #'s associated with the text entered in [txtItemNo]...(there could be multiple FactNo in our inventory system but PartNo is unique and the bound field for the control). frmItemSearch uses an unbound textbox (txtSearch) that populates with the text from frmExcEntry on txtSearch_GotFocus and queries a listbox with the list of possible PartNo to select. I want the associate to be able to double-click the accurate PartNo from the list box which will then update the value initially typed in txtItemNo and copy the PartNo over txtItemNo in the currently open frmExcEntry.
I have a mainform where TaxID is used in a combo box to add new records. The problem is not all of my paperwork will have either a SSN or EIN on it to filter the combo.
What I would like to do is use a searchform that has a listbox w/names and TaxID -->This works as I use it to search my records.
Using a copy of this search form I would like to add a new record using TaxId
I have tried different variations of this, and can get a new form to load but the TaxId is not updated.
Can someone help me for min?
***EDIT*** I have added an attachment of s stripped down db. I am still having problems trying to understand this, maybe someone could look at help, maybe my form is set up wrong.
I've enclosed a screenshot as it tells the story pretty well by istelf.
I would simply like to be able to click any item in the listbox (populated from a query simply showing all records in a table). Once an item is clicked in the listbox, I'd like the form to go to that record (this is to enable quick finding and deleting of records).
I've been playing for a while, and can't figure out how to make Access go to the record that's selected in the listbox.
I have a database containing 3 tables (for now): Customers Orders Catagories
Now i also have a form with customer information. In that form is a listbox with a query statement, so that should display wich orders are placed by that customer.
SELECT Orders.[Order-ID], Orders.Description, Orders.Date, Orders.Category FROM Orders WHERE Customer=[Customer-ID];
Now this works for the first costumer record being displayed. However when i view the next costumer, the listbox still displays the order information from the first customer.
How can i get the listbox to update itself when a diffirent record is viewed?
I have a Listbox that I want to use to go to a record on a subform. I know that it cant be done with the wizard.
The records that I am looking at don't have an ID so I want to look at both a date field [TrainingDate] and a Time Field [TrainingTime]. I have set the querry up and the list gets populated with the correct information. And I have added the following code to the AfterUpdate Event
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'" If Not Me.RecordsetClone.NoMatch Then Me.Bookmark = Me.RecordsetClone.Bookmark Else MsgBox "Could not locate [" & Me![QuickSearch] & "]" End If
Need help on a list box issue. Solution is probably real simple, just can't see it with my bleary eyes.
I have a form (INSTLKP) with only a list box (List6) based on a table ((tblPersData) with fields PersdataID; SSN; Last; First; MI) on it. When I open the form up, the listbox does display all records associated withthe table. I would like to doubleclick on a desired SSN in the list box and have that record open up in a form (Perssub1) in edit mode.
And that is where the rub is... I have the following code in the On doubleclick event of List6
I have a form which displays records of our products, on that form I have now put a list box which displays the ancillaries to the products.
both the form and the list box run off queries.
I have the same unique identifiers in both queries.
I need to filter the listbox by the unique identifier every time I move record.
At the moment the list box stays populated with all the ancillaries, how do I filter it programatically to list only the ancillaries with the same unique identifiers as in the current record?
I have a listbox on a form that show all Files for a particular volunteer. I have an "Edit File" button below the listbox to be able to edit that particular file. Is there a way about opening that form to that specific record without using a query?
I'm new to MS Access but I'm trying to do subcontractors database for my company. I've got a menu form with to listboxes on it. First listbox is a subcontractor name if I choose the name the second list box will show me the names of the emplyess attached to this subcontractor. Second form is subcontractor details with emplyees subform. If I will dblclick subcontractor listbox it takes me to record with subcontractor but I can't figuret out how to do that if I dblclick the employee listbox it will take me to appropriet subcontractor detail and to wright employee details. PLEASE HELP ME. I'm strugling with this. Thanks
I've made it to set focus to subform, but if I will choose a subcontractor from the first listbox and dblclick on lstEmployee it is choose wrong record of the employee. Have somebody have an idea what I'm doing wrong
I don't know how to attach the file,can sombody tell me how.
Code of this listbox:
Private Sub lstEmployee_DblClick(Cancel As Integer) DoCmd.OpenForm "Subcontractors", acNormal, "", "", , acNormal DoCmd.GoToRecord , , acGoTo, Forms!Menu!lstSubcontractor Forms!Subcontractors!tblEmployeesubform.SetFocus Forms!Subcontractors!tblEmployeesubform.Form.Emplo yeeID.SetFocus DoCmd.GoToRecord , , acGoTo, Forms!Menu.Form!lstEmployee End Sub
I think last line makes me those troubles but I don't have an idea what is wrong.
