Sorry if this is a really dumb question - I have just started using Access and I couldn't find the answer to this doing a forum search.
I have made a database consisting of a table and a form. All I want to do is get the form to appear automatically when the database is opened. I am using Access 2007.
Hi I've just moved my PC over to Office 2007. I have previously created an application in A2003 that consists of three databases which I move between frequently using command buttons running the following code to close the current one and open the new one:-
Private Sub Command14_Click() Dim RegSet As New QwestLib.QRegistryFunctions On Error GoTo Err_command14_Click
Application.Quit acQuitSaveAll Exit_command14_Click: Exit Sub
Err_command14_Click: MsgBox Err.Description Resume Exit_command14_Click End Sub
In 2003 this worked fine but we always had to enable macros on opening the new one. This is now not required as the application is "Trusted" but in A2007 every time a database opens the "Getting Started with MS Access" window opens.
Is there some way I can switch this off as it is unnecessary and time consuming.
I'm trying to migrate an Access 2000 project to Access 2007. I want that the frontend doesn't look like Access. This means: no ribbons, no office button, no Quick Access Toolbar, no database panel. In 2K, this was rather simple, but in 2007 I only managed so far to get rid of the ribbon (by replacing it with a blank ribbon) and the navigation pane, but I can't figure out what to do to hide the Office button and the QAT. Can anyone help me with this ?
I'm trying to migrate an Access 2000 project to Access 2007. I want that the frontend doesn't look like Access. This means: no ribbons, no office button, no Quick Access Toolbar, no database panel. In 2K, this was rather simple, but in 2007 I only managed so far to get rid of the ribbon (by replacing it with a blank ribbon) and the navigation pane, but I can't figure out what to do to hide the Office button and the QAT. Can anyone help me with this ?
I have quite a few user defined / custom functions which I would like to be available in any new database that I create without have to copy the VBA codes in a module each time. Basically, some sort of add-in that loads on MS Access startup may be (but I am not too sure - never created one). So something that will start with the MS Access Application and not just a particular database. I know excel addins can be copied to the XLStartup folder to achieve something like this in excel, but not sure about Access.
I am trying to display only my form on startup. Tools-Startup allows you to eliminate"Database window" default menu and toolbar but I can't eliminate "Microsoft Access" window.
I don't know if there are other settings that I am not aware of or there has to be code built.
Hi guys. I have some forms in my access database and i want load one of it automatically when i double click on my access.mdb . I be happy if some one teach me how i can do that.Thanks
I have a report that has a link to open a a form "ProjectDetailsActive" to a specific record ID from the report. It works.
I have 3 subsets of users who have restricted access to the form "Project Details Active". By that I mean that when they open this form, it hides and rearranges some tabs, and disables certain controls. If a user from one of these 3 subsets tries to open the link to a specific record in the form, it does not work. The form opens to the first record available instead of the selected record. This is only a problem for these 3 user groups. For users who do not fall into these 3 groups, the filter works.
This is the only code in the form that does the restriction, but I don't know where the process is going wrong.
Code: Private Sub Form_Current() LoadBudgetPage CancelRsn.Enabled = False 'detect number of line items for current project Me.lblOrderCount.Caption = GetNumRecords & " line items for this project."
I have an Access 2010 database that I have split. In the database I have a couple tables, forms and two reports. I have entered some data into one of the tables, but when I go to edit the data in the form the next time, there is no data (though I have verified that there is data in the table). Also, there are two reports that can pull the data without any problem.
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce 2) Select small file in MS Excel 2007 format. 3) Click on Import the source data into a new table ... 4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help: "ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I have installed Access 2007 and I have tried to run my program written in access 2003 and 2000. It seems to work with a few bugs but my biggest concern is about one particular form. When I open it, I can see the headers but no data. Of course the query from this form is not empty.
At the bottom of the form, I have a total of the records and other calculations but the data are not visible. ( In access 2003, there was of course no problems)
What is very strange is that other forms of my program are well visible.
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features. Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing! Help! I do have Runtime 2002 (XP) on the same PC, is that relevant?
Access 2007 is behaving very peculiar concerning sizing of forms. For example, some open at an enormous size (25 plus inches) when the width size in the property box is 8 inches. I've tried various combinations of Auto Center, Auto Resize and Fit To Screen -- all with bazarre, unpredictable results. Does anyone know if there is an "issue" (bug) in Access 2007 Trial concerning form sizing? Thanks.
I have a button which runs some VB, it brings up various message boxes as it prints a report to file, runs a query etc etc. I am hoping to display a basic form, which simply covers most of the screen and states "Please Wait" or something. I have already built the please wait form (frm_please_wait) and have set it to pop up. I have added it to my VB to open before I run the queries/output to file however the messages still appear on top..
How can I force the form to display on top of everything else in access ( it is only visibly for a few seconds, depending on the spec of the pc).
A form that used to automatically open when the db was launched has been deleted. However, the instruction to load the form is still in the db. I would like to remove that instruction, but I can't seem to find where to look for that code. In Access 2007, I went on DB to the Database tool menu, but its not in the switchboard manager.
When printing a form (record) in Access 2007??????? When I go to print preview the form displays (and wants to print) every record!!!! How do i get only ONE record to display and print..
I am running access 2007 and have a continuous form that I am trying to filter. The table that I am pulling the data from has the following fields: Order_Date, Order_number, Model.
I want to filter based on Order_Date.
I tried creating an "after update" Macro builder on my combo box and using "Apply Filter" but I cannot seem to get my syntax right.
Filter is the name of my combo box
Here is my current setup:
Filter Name: Where Condition: [Order_Date] Like [Filter] Control Name:
However whenever I select a new date from my combo box it asks me to "Enter Parameter Value" for Filter, which I don't understand because my combo box name is Filter. I would think they would link up.
So i have query based on 1 table that populates a Form. The primary key for that table is Entity ID. Therefore once the query has been run I have multiple records that i can scroll through in my form distiguished by their Entity ID.
I have a second table that has a Entity ID column, AFE Available column, and many others. The primary key for this table is called Match ID. This table contains records that have the same Entity ID.
My goal is to display on the form the Sum of the "AFE Availible" for each Entity ID. so as you scroll through the records the Entity ID is changing and you are able to see a the Specific "AFE Availible" Sum related to the current Record showing on the form.
I couldn't figure out a way to have a query based off both tables where the records are only uniquely defined by the Entity ID in Budget Info. What was happening is the query was displaying all the records that had the same Entity ID because of the AFE Spent table. That way when you scroll through the records the form shoes records with the same entity id.
Maybe im doing it all wrong and you dont need the tables attached to the same query. That would make it easier i think. So you would have two queries populating different text boxes on a form. Is that even possible?
I have been asked to create a database very quickly for a small group that needs to scan multiple pages into an Access 2007 form. They they would like all scanned documents to be converted to PDF and stored on a shared network folder which can be accessed by their group. I have tried several ideas posted but, I have been unable to get any to work correctly. Any sample of working database that the scanning portion is working? I am so involved with other projects right now that I just don't have the time to create a scanning process on the database.
I've been using Access 2007 to run queries on a database where we eventually export results as separate Excel spreadsheets for individual clients. The process is quite involved, using queries to change fields from code letters to words and splitting the database up into different client tables, saving the tables under date order and with different client codes.
I now need to pass this role on to colleagues, so need to make everything as straightforward as possible.
I had thought to use a Form as the user interface, with a minimum number of buttons, however I need either the system or the user to amend the date for the initial table, then to use this new table and run a series of standard queries on it, then produce the separate tables.
I don't think I can just use macros behind the buttons, because the database name is changing each time.
I assume some parts will be too tricky to automate - it will be necessary for colleagues to follow instructions instead.....
Is it possible (and how...) to declare a module-specific form variable (or any variable for that matter) at the top of said module, so it doesn't need to be set at the start of each subsequent procedure?
I have a module of code specific to one form with a number of procedures, each one of which requires me to Dim / Set the form variable. It would be much neater if I could do it once at the start.
Code: Option Compare Database Option Explicit Public Sub Populate(lngParameter As Long)Dim frm As Form
I'm working with Access 2007 and am trying to make a form with multiple tabs that will update when a certain business name is selected in the combo box at the top of the form. I have tried looking up different codes to make the combo box update correctly but can't find anything. Right now I have this code in my After Update:
Private Sub cboBusinessName_AfterUpdate() On Error GoTo myError Dim rst As Object Set rst = Me.RecordsetClone rst.FindFirst "[GrowerID] = " & Me.cboBusinessName Me.Bookmark = rst.Bookmark
leave:
If Not rst Is Nothing Then Set rst = Nothing Exit Sub myError: MsgBox "Record Not Found" Resume leave End Sub
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!