Log Data To Table - Programatically
Oct 19, 2005Any insert command to load Oracle profiler log data into table...
??
ADVERTISEMENT
Find And Replace Programatically
May 3, 2005Hello,
I have a list of dates of births in a table, but the way they are always imported (from some piece of crappy software somewhere) is in the format of: 01.01.2005 (using full stops).
Access doesn't like this, and insists on slashes, or dashes. Now, if I do a find/replace, it works perfectly, just replacing all the full stops with slashes. However, I want to do this quite regularly...any ideas how to do it programatically in VBA?
Thanks!
Any help much appreciated!
Link Tables Programatically
Apr 21, 2006Is it possible to unlink and link to tables in a back end using VBA in the front end?
I need to do this or something similar because when I send updates of the front end out I may have added an extra table and thus want to be able to get the user to run an update module to link any new tables.
Not sure if this is at all possible???
Any ideas???
Programatically Delete Relationships?
Mar 3, 2006I know you can manually delete table relationships in an .mdb, but I was wondering: Can you programatically delete table relationships? If it is possible, how would it be done?
Thanks in advance to all you nice folk who reply.
Populate Combobox Programatically
Mar 5, 2008I have a form that I am populating a ComboBox via a Query. It works but sometimes it flakes out and does not populate the box.
What I want to do is run this through code.
I am a bit stuck. I think that I need to set the recordset, Create a SQL query, Run the query and push the results to the ComboBox. Think this should be on the Click event of the combobox.
Dont really know where to get started.
Does anyone have a rough example of:
1. Getting the recordset
2. A general SQL query (how to run it)
3. How to push the results to the ComboBox
THANK YOU IN ADVANCE
How To Select An Item In COMBO BOX Programatically?
May 13, 2005hi All..
I could set the Combobox.Value to one of the values in the combo box and combo box displays that value. But when I try to use Combobox.Value subsequently it does not have any value. I noticed that the value property is populated only when the combox box item is manually selected(highlighted).
How can I highlight the selection in a combo box?
Thanks in advance
Programatically Revert To Previous Version
Dec 1, 2005I know how to convert an Access database from a previous version of Access to a higher version of Access, using the shell command:
x = Shell("C:Program FilesMicrosoft OfficeOfficeMSACCESS.EXE " & Chr(34) & strOLDDB & Chr(34) & " /Convert " & Chr(34) & strNewDb & Chr(34))
However, what do I have to do to programatically revert from my current version of Access to a previous version? Is there a shell option similar to the /CONVERT choice? It would be nice if it was as simple as /REVERT
Thanks once more to you forum gurus!
Help Please - Changing Column Lables Programatically
Jan 7, 2006I have a subfom that displays perfectly in datsheet view.
One of the columns changes its contents depending on a value. i.e. a list of units or a list of costs. I change the data using a Recordset update.
When in the Main Form I am trying to change the column label that appears in the SubForm header above the column, to either 'Units' or 'Cost, to match the data.
I am strugging to find the correct syntax, can anyone help?
Also, can I change this via the Recordset update?
Thanks :confused:
Modules & VBA :: Check If Data In Table 1 Matches With Any Of Data In Table 2
Dec 4, 2014There are two tabs named Table1 and Table2. In actual there are two tables in Access database named Table1 and Table2. How the data is stored in ACcess tables, I have made two tabs in excel workbook. Now I want Access VBA code that will check if data in Reference field of Table1 matches with any of the data in Reference field of Table2.
If it matches then change the status of the corresponding record of Table2 with either "Withdrawn","Obsolete" or "Updated". SO it depends upon which field out of "WIthdrawn","Obsolete" and "Updated" in Table1 stores "Y". At a time only one of them will have "Y" and rest of two fields will have "N" as shown in the sheets.
As in the example, now Reference "R566" of Table1 matches with Table2 Reference so the status field in Table2 for that record will be "WithDrawn".
Queries :: Filter Data From A Table Using Query (from Data Input Form)
Dec 30, 2014I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.
Modules & VBA :: Copy Data In Sheet1 Using Sheet 2 And Access Table Data?
Aug 5, 2014I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected
Total Envelopes=sum(Envelopes) for date selected
Total Documents=sum(Cases) for date selected
Total Pages=sum(Pages) for date selected
Forms :: Make A Button To Search Range Of Columns In Data Table With Data Type Yes / No
Apr 15, 2013what I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes
View 9 Replies View RelatedSetting Data Import To Overwrite Data On An Existing Table
Aug 1, 2007I have a database that I import data from an excel spreadsheet into multiple times daily. The table that this data is imported into has several key fields that if the data already exisits in the table, and I attempt to import data that is the same except for one or more of the key fields is different. At this time the database it creates a different record. I am trying to get the database to overwrite the data in the database.
View 1 Replies View RelatedGeneral :: Updating Table Data With Data From Preceding Entry?
Jan 5, 2013My question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:
ID WorkerNumberDateworkedTimeStartTimeEnded
121/2/201310:00:00 AM3:00:00 PM
221/3/20132:00:00 AM11:00:00 AM
321/4/201312:15:00 AM11:30:00 AM
421/5/201310:25:00 PM11:00:00 AM
531/2/201311:00:00 AM3:30:00 PM
631/3/201312:00:00 PM10:00:00 PM
731/10/20137:00:00 AM4:00:00 PM
I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.
Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).
Modules & VBA :: Take Data From One Table And Insert Into Another Whilst Doing Calculations On Data
May 2, 2014I am trying to use SQL to run queries in our access database in order to (hopefully) speed things up. I'm trying to create code that basically takes data from one table and inserts it into another whilst doing calculations on the data.
However I can't get past this:
Code:
Private Sub Test_Click()
Dim strSQL As String
strSQL = "CREATE TABLE [TempRedAmberGreen]" & _
"AS (SELECT " & _
"[ID_CHK] String," & _
"[Red] String," & _
"[Amber] String," & _
"[Green] String)" & _
"FROM [035 - Meter Point HH Data];"
DoCmd.RunSQL strSQL
End Sub
It keeps saying "Run-time error '3292': Syntax error in field definition.
Changing Data In Query Results Changes Data In Source Table
Dec 17, 2012I have a table and a simple query that pulls results from the table. Nothing too crazy. But, if I were to go in and change some of the data/values in the query results it will change the respective data in the table. I know that this cannot be right. What do I have to do to either prevent the ability to change query results and/or prevent any changes in the query from altering the original data in the table.
View 2 Replies View RelatedData Tranfer From One Form To Another Without Storing Data In Db Table
Jan 12, 2006:confused: Hi
I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form
thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it.
thnk in advance
Data Tranfer From One Form To Another Without Storing Data In Db Table
Jan 12, 2006Hi
I have some 100 questions for which user must answer by selecting any of the options provided using option buttons.
As i cant fit all 100 qtns in one form am splitting it into soem 10 forms.
User answers the qtns in 1st form and clicks on next button to goto to nxt form
thn agn he answers the qtns in tht form and clicks on next button to goto nxt form..so on.. until he answers all the qtns in the last form.
I want to transfer the answers selected from 1st form till the last one..where all the answers are stored in one table whn a submit button is clicked.
please let me kno ASAP if thr is anyway i can do it.
thnk in advance
Queries :: Enter Data Not Less Than Certain Data In Another Table (field)
Apr 22, 2013I have a query called "Stock" containing field like (Item, Description, product_qty)
Another is a table called "Sales" with fields like (Sales_ID, Item, Sales_description, sales_Qty, date_Of_Sale) Item field on sales is a foreign key.
Now what i want is how can i make when the user enters new record, in field "Sales_Qty" the data entered here to be less than product_Qty.
NB; this is because you can not sell more than what you have.
Forms :: When Pasting Data In Table / Some Of These Data Appear In Form But Some Are Not
Mar 13, 2013I am new to access (2007), There is a datasheet in the form where we enter our time in/time out. We enter data using the form but that is one data at a time only. So I tried to paste multiple data (records) from excel into the access table. After pasting into the table, the data appears in the query, but not in the form.When I go to the form to check if the data I pasted into the table will appear in the form's datasheet...some data appears but some does not.
View 2 Replies View RelatedGeneral :: When Transfer Data From Table In Excel To Table In Access / It Loses Format
Jan 29, 2015When I try to transfer (ctrl c + v) data from a table in Excel to a table in Access it loses format.
Exemple: $ 1.000,00 (Excel) become 1000 (Access).
I need to keep the format to make sure that the code works properly.
General :: Copy Data From Local Access Table To Linked SQL Server Table?
Jan 13, 2014I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
Making Form Open With Data From A Table Based On Date And Time In Table?
Sep 12, 2014How to make a form open with data from a table based on a date and time in the/a table?
View 7 Replies View RelatedExtracting Data From Linked Db2 Table Using Access Make Table Query
Aug 29, 2006Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
Move Record To New Table After Data Change In Combo Box Value In Original Table.
Nov 24, 2006Ok my problem is this......
I have a form with a field "Property Status" on it. It has 4 possible values -
"C - SHELTERED (with warden charge)";"H - SHELTERED (No warden charge)";"J - WHEELCHAIR SHELTERED (With warden charge)";"M - WHEELCHAIR SHELTERED (No warden charge)";"X - DISCONNECTED"
When the value "X - DISCONNECTED" is selected in the form I want the record to be removed from its existing table and sent to a new table which keeps all the "X - DISCONNECTED" records together.
Any ideas would be greatly appreciated. How would this be coded?
General :: Possible To Have Data From Linked Table Automatically Update Into Existing Table?
Aug 17, 2012I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?