I am using access to create a dictionary of terms, using two fields: “term”
and “definition.” The data type for the term is text and memo for definition
(so I can use an unlimited number of characters).
I created a query to search the terms and pull up the definition; however,
it is not very “visually friendly” when the term comes up and it is hard to
read a longer definition as the text continues on one line.
For that reason, I wanted to create the same search function; however,
instead of the term coming up in the table, have it come up in a form (since
those can be presented much nicer). Is their any easy way to do this so I do not have to set it up each time (as this will be used by many other people who have no clue how to use access).
I am using access to create a dictionary of terms, using two fields: “term” and “definition.” The data type for the term is text and memo for definition (so I can use an unlimited number of characters).
I created a query to search the terms and pull up the definition; however, it is not very “visually friendly” when the term comes up and it is hard to read a longer definition as the text continues on one line.
For that reason, I wanted to create the same search function; however, instead of the term coming up in the table, have it come up in a form (since those can be presented much nicer). Is their any easy way to do this so I do not have to set it up each time (as this will be used by many other people who have no clue how to use access).
We have a small business and i do all the admin. I've created a database of all our contacts (name, address, phone number, fax number, etc) and i've managed to create a form that allows me to enter the data into that instead of directly into the database window.
The last thing i want to do is create a search form or add a button to my existing data entry form that will allow me to type in a contacts name, address, or any other thing about them i remember at the time, and be taken straight to that entry. Once this is done that is all i need to know for the moment.
I've tried an example i found on microsoft's site but can't get it to work properly.
Can anybody help. I'd imagine this is very very simple but i can not get the answer myself.
I searched this forum just for "treeview" and on the 2nd or 3rd page I found a post with a link for some lessons on treeview. Part 1 was to make a treeview with the word Hello. Part 2 was for another lesson on treeview.Tried to find that link again and for the life of my I'm unable to find it.
I have a form frmMember, it has a search button that performs a complex search of fields. after performing my search my [BaseDues] field shows #Name? BaseDues is set by a CBO in the field above.
It works correctly except after the search...
Here is the Code for the Search Button:
Private Sub cmdSearchForm_Click() On Error GoTo Err_cmdSearchForm_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "frmSearch"
I have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
I currently have a database with a few search forms. I recently attempted to add a box on one of my search forms to search 3 cells of a record for a key word. What happens is when I go to search, say for P0442, it does not bring up all of the records that contain that keyword in the 3 cells I have outlined. If I step down the code in the OR boxes of the query, it seems to work better but then for some reason my other search criteria , (Tracking number etc) does not work. I will upload the database for reference. I am currently working on the Search(View Only) and that is where you will find the query to work on.
I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.
I have a search combo box to search for a field on my form. But it just goes to that particular record. The combo box is for client id and it has more than one record. How can I have it return just the records pertaining to the client id choosen in the combo box.
I am new to using MS Access and am already frustrated that a simple task is getting the better of me.
My situation is that I work for a company that has a number of reps, which are allocated their own ticket books(block). Each book is 50 tickets in size i.e say from number 320500 to 320549. All tickets are entered through our internal system for whatever the ticket was used for.
Now here is my problem. Each block is registered to an individual rep which we need to keep record of as to which tickets are allocated to them, other then having to enter each ticket individually into our ticket block records system, I am trying to make a database entry that accepts the reps name, ticket block start number and then automatically adds the next 50 tickets to that rep, so when we use a search field on any ticket it displays the rep that the ticket was allocated too.
In my head i'm looking for the MS Access way of doing the following: [tickblockstart]+1 until [ticketblockstart] = [ticketblockstart]+50
Can anyone help me with this probably very easy problem, that i can not seem to grasp at the present time.
hiya, im trying to create a button my form that will move all 'finished' records from where they presently are, to another table. the button does work, it moves the records into the 'new' table, however it does not DELETE them from the table i moved them from, so now the records are stored in two tables??
the code i have is as follows: SELECT * INTO Table2 FROM Table1 WHERE Finished='Yes';
if there is something different that i should be doing, or a better way to do this move, please let me know.
(also if this is in the wrong section feel free to move it)
:confused: Fingers crossed I'll get some direction to resolve an issue that I can't even begin to imagine how to search for.My database is used to record detailed work done with clients who are receiving regular support. I'm designing it around a Common Assessment Support Framework that I have no choice but to follow, except for some minor points. There is the potential for approximately 40 different assessments for each client and therefore a lot of duplication in personal details.So far this forum has been a great help and I have learned a lot from those who volunteer their time to those of us who need it from time to time.Following the numerous examples of normalisation posts I have attempted to ensure there is no duplication of information across tables. I've come to a point however where I am stuck:The end result of what I am trying to do is create an individual report called Needs Assessment Planning Tool - rptNAPT.The report will be populated from the fields in qryNAPT that is made up from tblIA1 and tblIA2tblIA1 consists of 17 x 'area of need' that is broken down in to 5 elements: 'Now - Y/N', 'Later - Y/N', 'User Level - Number', 'Worker Level - Number' and 'Disagreement - Memo'. These fields are entered by using frmIA1, and these fields are entered by using frmIA2.So, now I have to enter data in to another form; frmNAPT that includes both theseand thesefields. I only need to show the area of need where Now is True in the form and the subsequent report; rptNAPT.My thoughts about this are (please don't laugh) in the form frmNAPT the 'Area of Need' because in the table there are 17 different areas e.g. Accommodation (improvement), Homelessness, DomesticViolence etc will need to be unbound and in some way filtered to show only those area of need where fldNow is True? and fldUserLevel is NotNull or doesn't equal zero. I will need a minimum of five such fields to show the Areas of Need that the Client and Worker may elect to work on.Sorry for the long post but I'd really appreciate some direction on this, even if it is only to point me in the direction of a link that can be helpful.RegardsDoug
I created a DB in an old PC of mine for a customer. I set passwords for user accounts to prevent users from accessing the design etc. I bought a new PC lately and I want to open the DB to work in it but I get an error saying that I do not have the rights. I suppose I need to create the same accounts in my new PC as in the old one but I don't remember the username or password that I was using back then. Any Ideas???
My database queries, tables, and reports is growing. Is there a function/utility that will show me for a particular report what queries, and tables that are used to gather the data that populates the report? Thanks! Gunner...:confused:
I have just opened Access and for some reason my menu bar is gone. I have fiddled for a few minutes try to find and restore it - but I am clueless. It is working fine in all other programs.
I'm completely lost on how to get started on security. After reading all these postings I'm more lost then ever. What is a backend and frontend security? How do you create password for each users? etc...
My database, I don't know what happend to it. I'm trying to open it but it gives me a message: "The form name 'Welcome Screen' is misspelled or refers to a form that dosen't exist' If the the invalid form name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct form name." and then after I click ok it open the database but it doesn't show my forms, Reports, Macros or Modules that I have created before.
what does it mean, may I lost all my previous work and data ??? :(:(:(
Please I'm waiting you ... I'm about to lose my mind
I have been trying to figure out comboboxes and lookup tables on and off for two weeks now and am completly lost. I have read the tutorial on cascading combos. I have downloaded and studied the the autofill db example from Pat Hartman. I have searched and read the threads and am still having a problem. I have several lookup tables. I will use one as example. This a database for my lawfirm. We get a lot of referrals from other attorneys. I have a lookup table with the name, address and phone of all attorneys. I have a combobox on my clientinfo form that looks up the atty info . I put the attorneyid field in my clientinfo table as FK and linked my clientinfo table to the attorney table thru this field. All this did was generate an error message that I could not save my record because there was no corresponding Atty record. I know this should be so simple. Can someone please help me? What do I with data I have lokked yup from a lookup table and how do I link it to the tables that will need it later on? Thank you in advance.
Really struggling with my structure and have been looking at it for so long my head hurts so any advice would be great. (see attached)
Basically, I want a DB for keeping track of service / repair of electronic machines. Many of our customers also call us for tech support. There are a number of other items like purchases but once I have worked out one, I can then copy the methods.
Are my relationships even remotely correct? I cannot get the calls log to work - loosly based on the sample a supplied with Access "contact managment". :confused: Any help / advise would be greatly received
The database is blank, but the information entered into the forms are saved into the tables.
Now I want to make a query so I can see some statistics regarding the information entered into the forms and stored in the tables.
I have created a query, but Im not sure what to do next, do I connect it to the query and it should give me desired output or do I connect the form to the table or how does it work ?
need some feedback Im a little bit lost in this :( regards Frodo
I recently moved by database from one hard drive to another - all is working ok after refreshing the links. However I have a few queries and reports that are date or date/time specific. (ie; I input a specific start / end date or start/end hour) Now when I run these queries it returns an error message stating 'Data type mismatch in criteria expression'
Please does anyone know why and how can I restore the queries ? Prior to the move all queries / reports worked OK.
I have a form and on open it traps the user into a combo box where an option must be selected before they can move to another field. I did this by using the lost focus event of the combo to check if an option has been selected and then return the cursor to the combo if no selection has been made.
The problem is that there is an exit button on the form which the user must be able to use to exit the form without interacting with it, say if they opened the form by mistake and just wanted to exit immediately.
I cant find a way to trap users into selecting an option from the combo before filling the rest of the form while still allowing the exit button to work. At the minute you still have to select an option in the combo even if you just want to exit the form.
I have been a notes developer for years so I’m still not that familiar with access and the way its events work so this could easily be a gormless question. Feel free to point that out. Any comments would be much appreciated.
