MS Access Lookup And Compare A Range Of Number...is This Possible ?? Please Help !!!!
Jul 17, 2006
I was wondering can MS Access do a range compair look up. I have 2 tables. One is the Info table and the other is Rate table. The Info table has 3 columns like this:
[code]...
I want access to read the Info table and pick up the values in the FICO, LTV and Type and compair it. Like with the above example. In the Info table FICO = 622. So then I want it to carry the number 622 down into the Rate table and compare that the number 622 is in FromFICO and ToFICO column to find where does 622 falls in between. In this case there are nine rows in the Rate table that 622 is between 620 and 629. The next criteria is the LTV number in the Info table. It's 76. So back into the Rate table looking for the number 76. And 76 is happen to fall between 75.01 and 80.00 in the FromLTV column and ToLTV column. Next back to the Info table is the Type column which is 2. Now back to the Rate table to look up the Type column for Type = 2. So from FICO = 622 , LTV = 76 , Type = 2...So the rate I want to populate is 0.25...So is this possible to do in Access?
View Replies
ADVERTISEMENT
Feb 15, 2007
Hello,
I have two tables in my access database.
A. Lets call one table "Map" and Map table has the following fields:
1) ZipCode_From
2) ZipCode_To
3) Salesperson
ZipCode_From : ZipCode_To : Salesperson
00001 : 10000 : Smith
10001 : 19999 : Jones
20000 : 29999 : Johnson
B. Second table is called "SaleMap" and SalesMap table has the following fields:
1) ZipCode
ZipCode :
00252 :
12568 :
22563 :
C. I would like my end query to look like this:
ZipCode : Salesperson
00252 : Smith
12568 : Jones
22563 : Johnson
Any help would be much appreciated.
View 1 Replies
View Related
Dec 4, 2014
I'm trying to compare a Currency formatted field to a Number formatted one and getting wrong results.other then formatting the Number as Currency too ? Tried to use Val() but the Currency returned 0
View 7 Replies
View Related
Nov 1, 2012
I have a set of numbers, say (these could also be values of a column in a table)
FieldA = { 11, 16, 20, 23, 30, 37, 40, 50 }
I have a number, say 196.
I want {16,23,30,37,40,50} to be returned as these numbers add up to 196.
Note :
1) There is no possibility of two solutions with the kind of numbers that I may be using.
2) A solution using excel is also OK, though, personally I would prefer access.
Edit :
3) {16,23,30,37,40,50} - Each value is a separate record i.e. they are not in a single field, rather :
16
23
30
37
40
50
View 12 Replies
View Related
Jun 11, 2007
Hi all,
I'm building a quick database, but some of the data to go into the database is quite... odd...
Anyway, the point is, I have one sheet that says
"Job Number 1200-1245" which would have all the same details, dates, etc.
Is there a quick and easy way to put in a range, say J1200-J1245, enter the data once, then be able to query... for example J1212 would return the same data.
Cheers :)
View 1 Replies
View Related
Apr 14, 2006
I am creating a query which determines the number of days a payment is delinquent. Is there a function I can use in a query field that would look at the numeric field and if the value of the subject field was:
< 60 Days "30-59 days"
< 90 Days "60-89 Days"
<120 Days "90-119 Days"
>=120 Days "120 Days +"
It was my understanding that the IIF function tests for a condition and can only return yes/no results. I seem to remember that SQL had something like a least or most function that would allow me to set maximum value for range of days. I apologize that my question is confusing and hope you can understand what I am trying to accomplish.
Thanks for any help
View 2 Replies
View Related
Mar 7, 2006
I am trying to make a query that finds all records by the "Month Number" and have problems.
What I did:
Month(DateField)
I got month numbers like I wanted but when I typed in the criteria below, I got February thru December Records, but when I search on anything "up to" 9 it works fine.
I want:
Between{month1] and [month2]
Month1= 9 (example)
Month2= 12 (example)
Need results to be from the requested months but any year
I have to imagine it's how the date is converted to an integer, but not sure.
Any help would be great!
View 4 Replies
View Related
Sep 17, 2013
I have this formula for counting age groups
TOTAL 29 - 31: Count(IIf(DateDiff("yyyy";[DATE_OF_BIRTH];Date())>=29<=31;1))
But id does not work, if I use between 29 and 31 also do not work
I need to get count (number) of all students that have 29,30 and 31 year of age.
View 5 Replies
View Related
Oct 23, 2014
I'm trying to create some code that will create a new folder depending on the ID that is currently being added to the database.What happens at the moment is a new ID is generated which in turn is job reference.When this is added to the database a folder is created with a prefix of this ID number and a 20char test specified in a text field by the user.
What I am trying to achieve is this:If the ID = 57...Then a folder is create called 1 - 500 (and ignore if one has already been created, which it should have at ID number 1)...When the ID Number 501 comes along another new folder is create called 501 - 1000 etc etc.The idea is not to have 3000+ folders in just one folder making it look a bit messy and lengthy to look through.
View 3 Replies
View Related
May 1, 2008
When using the Format:'yyyy mm dd' in access queries.
When trying to show a week is there a way to show the
date range instead of week number.
Week 01 = Jan1-7. If the results are only week numbers
that makes it hard for people to understand when it
actually is. Bottom line is: I would like to convert
Week number to actual date range. Can anyone help with
this?
View 9 Replies
View Related
Apr 16, 2014
I am looking for a way to use vb, or any other way, to allow my users to enter a railcar initial and then a number sequence and add new records to the end of the table.
For example in a form the user can enter the car initial and the number sequence
Railcar initial: GATX
Number sequence : 290001 - 290100
I would like a way to create a temp table that then has 100 records
GATX 290001
GATX 290002
GATX 290003
etc etc.
I can then use this temp table in an append query to add them to my main table.
View 7 Replies
View Related
Aug 30, 2013
Ok, not sure if this is even possible or where to even start..
I've got a form that has all the info for a client, eg..
Client First Name
Client Last Name
Client Hours
Client WE/CS/EE
Client Day And Times
Client Phone
Client Comments
Begin Date & End Date (2 boxs) on there for date input..
and what i'm trying to do is limit that any date entered between begin date and end date, it'll check and make sure there is only ever 20 clients on any 1 day..
i thought Datediff would be the way to go, but then again how do you get it to search each day and make sure theres only 20 clients on there..
View 1 Replies
View Related
Mar 19, 2013
I have a table called StockTable with the following fields Location, Status, Serial, Make, Model, LastDate, DotNumber
I also have a table called FCDateRange with three fields
DateStart DateEnd and DotNumber
For example
3/7/13 - 3/13/13 - 1
3/14/13 - 3/20/13 - 2
Im trying to figure how to write a query that if the lastdate from the StockTable falls during the DateStart and DateEnd fields it will assign it the number in the DotNumber field
View 2 Replies
View Related
Nov 12, 2014
I got a easy table with two columns. To make it easy say
1 20
2 40
3 30
4 78
5 60
6 85
7 20
I want to put the number 1 - 7 over a picture and get it to look up the value in the 2nd coloumn and replace the nr with the number in the 2nd column. Is this possible? I would have to manually put in where 1 - 7 is (this will be labeled ontop of a plot plan)...
View 4 Replies
View Related
Mar 31, 2014
I have two tables (one is a query)
Table 1 (query based)
EMP_ID
Prev_Emp_ID
EMP_ID_DDSK
332-123
1
500
332-133
1
501
332-144
0
332-156
1
502
332-654
1
503
332-456
1
504
332-967
0
Table 2
Res_Numbers
Num_Of_Employees
500
10
505 - after 5 numbers are placed
Will be added for next hire
My goal: to place employee numbers into new employee field "EMP_ID_DDSK" (table 1), Numbers will come from (from "Res_Numbers" field (table 2)
Example: If field "Prev_Emp_ID" = false
Get the next number in line from table 2 "Res_Number" and place it in table 1 field "EMP_ID_DDSK".
Example: if "Prev_Emp_ID" = false for 5 new employees. Take the next set of numbers and place into field "EMP_ID_DDSK".
View 4 Replies
View Related
Jan 19, 2015
Code:
' count records in query
Dim rs As DAO.Recordset
Dim db As Database
Dim strSQL As String
Dim beginDatum As String
Dim eindDatum As String
Set db = CurrentDb
[code]....
View 4 Replies
View Related
Nov 27, 2012
I have a database for scheduling students' for tests. They can take up to six tests in a day. There are about 80 different tests that they can take.
In my table, I created columns titled Test1, Test2, Test3, etc. They are lookup columns and I chose to enter my own values, putting in the tests titles for the values in each column.
When I add these drop-down lookup fields onto the form, it will only display 37 of these values. When I go back to the table and select "edit list items," it shows that it did cut the list off at 37, even though originally it allowed me to enter all 80-ish titles.
Anyway. It appears that there are limited values you can have in a lookup column, though after doing a lot of searching online I can't find anything to indicate that is true.
It seems to me that it would be smarter to set this up with two different tables, storing the reg info in one table and the test titles in another table. However, I am having a hard time figuring out the relationship aspect of this solution and how to make it pull up the correct values for queries/reports as well.
View 6 Replies
View Related
Sep 27, 2007
Hi,
I need to compare 2 tables with Same Structure in a Database and pull out records that are not matching in both the tables. As anyone done similar task in Access 2002, if so please let me know how this can be accomplised.
View 14 Replies
View Related
Apr 3, 2014
I work in retail and am trying to compare items that are on auto-replenishment for a particular location to items that the location should have in their retail assortment to make sure that all of their items are on auto-replenishment. I need to also perform the comparison backwards to find out if any items are on auto-replenishment that should not be because they are not carried in the location's retail assortment.
I have attached a file below that shows the files I am working with. The first tab "items on replen" show the item # (in text and general formats) along with the location number, the min and the max. The 2nd tab "POG's by Center" show the retail planograms assigned to each center. The location# is at the top of the file and the planogram numbers fall below each location #. The 3rd tab shows the items on each planogram. The first thing I need to do is convert the planogram # into items on each planogram in each center. This is what I would need to use to compare to the items on replen.
View 1 Replies
View Related
Nov 7, 2013
I have a form with an unbound textbox. I want to be able to enter a sequence of digits and spaces (e.g., 02 950 4187); however, when I paste this into the box, I always have to delete the two spaces until the number is 9 digits long. Then it will accept the number and go look for the prize. How do I get the textbox to accept the number I paste in?
View 5 Replies
View Related
Aug 8, 2007
I have an excel spreadsheet that I imported into a a table called LBCItyProfiles.
I have Another excel spreatsheet that contains our portal users info, I imported it into a table called Export.
I need to see which Emails Do Not Exist in Our Export database but exists in the LBCItyProfiles.
Both Databases have fields called EMail. I need to return the FIrstName, LastName and Emails of users that do not Exist in our Export database. I should not return Emails that are in the portal but not in the LBCityProfiles because maybe thats why my earlier SQL was not working:
SELECT LBCityProfiles.Email
FROM [LBCityProfiles] LEFT JOIN [Export] on [LBCityProfiles].Email = [Export].Email
WHERE [Export].Email IS NULL
This SQL returned Emails that Existed in the Export database but not in LBCityProfiles database, I do not want it to do that. I just need to see how many LBCity ids did not make it to the portal.
View 9 Replies
View Related
May 9, 2014
I have 2 tables...a lookup table with possible responses (i.e. yes, no, don't know) and the second with 8 fields that contain the values selected from the first table. Tables are related one-to-many. I need to count the number of times each of the responses shows from the lookup table shows in each of the fields in the main table. Have tried to query with the lookup field set to "group by" and each field set to "count".
View 2 Replies
View Related
Jul 7, 2014
I have a field in a table where it is a lookup is a combo box. So this makes the data type of the field a number when in reality it is a text. When I have this field show in a list box it shows the number instead of the text.
View 5 Replies
View Related
Dec 14, 2007
Hi,
I try this way but it doesn't work
SELCT * FROM TABLES WHERE ApplDt > 2007-10-01
which format I have to use.Thanks
Mark
View 1 Replies
View Related
Mar 31, 2015
I want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
View 5 Replies
View Related
Dec 2, 2014
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code:
Private Sub CommandButton1_Click()
ChooseFile
End Sub
Sub ChooseFile()
Dim fd As FileDialog
Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" .
3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn"
4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete"
5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
View 14 Replies
View Related
