Macro To Open A Report That Includes Certain Dates?
May 11, 2012
I have a bunch of reports that need to be printed, but only if they include a certain date. I want all of the dates to show up though.
For example:
There are 3 reports with a bunch of different dates in the bill date column.
Reports A and B include the date 04/30/2012, along with a bunch of other dates.
Report C does not include the date 04/30/2012.
i want reports A and B to open since they include the date 04/30/2012, and I want all of the other records with other dates to show up on the reports along with records with a date of 04/30/2012. I do not want Report C to open at all.
View Replies
ADVERTISEMENT
Sep 16, 2014
I have a report that is based on a query. The query has filters in it based on user info entered from a form. So the form asks the user to select which division of the company, and the date range for when the info applied to. My issue is that I am trying to set a macro that opens this form whenever some tries to open the report.
But the macro appears to run the query before it opens the form and it gives me a generic message box asking for the division. After I type that in (instead of selecting from a drop down list like I have on my form) another window pops up asking for start date, etc...instead of opening the form I created. What am i doing wrong and how do I get the macro to open my form? If I open the form directly and enter the criteria, it runs the report correctly.
View 7 Replies
View Related
Jul 10, 2012
I manage a fleet of vehicles at work with drivers assigned to these vehicles. Each driver may opt to pay a contribution for private use of these vehicles.
This can normally be done on an excel database, however, the drivers sometimes go on leave, so I need to put their payments on hold. At this time, other drivers may take over for that period or the vehicle is left at the office. Also, the drivers change their level of contribution from time to time, so I need to adjust that accordingly too.
When the driver takes over a vehicle they complete a form that has the contribution level (there are 4 to chose from) and the dates they will have it from. They always provide a start date, however, sometimes the end date is left open.
Sometimes, driver A will say something like 'From 1 Jan 2012 To Open' then driver B may take it for a week and say 'From 1 July 2012 To 1 August 2012'.
I want to know if Access is the right tool to produce the report with the current driver, and that it will revert back to the Driver A after 1 August?
View 1 Replies
View Related
Oct 24, 2014
I have the following vba code which serves essentially to find the serial number of the computer's hard disc. When the code find the serial number then can be avaliable as "S" to use it as you may want. Now, if you assign any Pc as the "Administrator" (through the vba code) after the verification of the serial number the code should by-pass all relevant procedures and proceeds directly to open the form "frmStartupScreen".
The Problem: Although the code works, sometimes (not always) after the opening of the database cannot show the relevant messages ( eg. "Welcome Administrator" if the code recognize the Pc as the administrator) and leaves the empty the screen (blue screen environment access) and i must do even a click anywhere in order to show the relative messages so to be able to Login the database. Is it something related to my computer ? Maybe it would be better instead of the code "IF" to change it with "Case" ? If with "Case" should be better.
Public Function CheckVolumeSerialNumber1()
Dim S, Serial As Long, VName As String, FSName As String, strSQL As String
VName = String$(255, Chr$(0))
FSName = String$(255, Chr$(0))
[code]....
View 5 Replies
View Related
Jan 19, 2005
Hi
I am trying to transfer some data from a table to a CSV file. No problem with all the code or setting this up. The only issue I have is that access insists on the date field I have exporting a time with it. I just want the date. I have tried specs, setting upa specific query but I bump into the same issue each time. I've tried setting the properties of the query to dd/mm/yy but even that includes the long time with the date.
Any ideas or do i have to write my own export?
thanks in advance
Jeff Taylor
View 2 Replies
View Related
Dec 6, 2006
Hi All
Can someone help me with opening a form from another form using the OnDblClick event and to open the form using the data in the record to open it at the same record. ie Site Name = CP House so the form opens with CP House data showing, Site Name = St James so the form opens with St James data showing etc.
Thanks
ChrisD
View 1 Replies
View Related
Aug 11, 2006
Hello, I have a form that I will need to allow users to be able to go back and find a specific record and edit it. I have a control number to uniquely identify each record. I have a main data entry form where the subform has the unique value in it. Can I run a macro to ask the user what control number they are looking for and then open the data entry form to that specific record?
View 1 Replies
View Related
Dec 21, 2006
I really hate being stupid about this, but I'm running around in a circle and it's making me dizzy. All I want is a simple macro that opens a form (with a subform) at a new record from a button. I know I am missing something obvious so I will let others see if they can find out what has gone wrong. The current macro is:
OpenForm(FormName)..View(Form)..DataMode(Add)
GoToRecord .. ObjectType(Form) .. ObjectName(FormName) .. Record(New)
On the property sheet of the form the following are all set to yes:
Allow Filters, Allow Edits, Allow Deletions, Allow Additions, Data Entry (I suspect the problem is here)
Record Locks is set to No Locks.
When I open the form from the button, it looks right, and I can enter the transaction information, but when I try to enter the subform information or save it , I get "The Microsoft Jet database engine cannot find a record in the table 'NewContacts_tbl' with key matching field(s) 'ContactID'". I get the same message with Allow Data Entry set to no.
And yes the key field IS there, in spite of what the Microsoft Jet database says.
I hope everyone gets a chance to enjoy the holidays and thanks to all of you for your past help and my current (relative) sanity.
A2K
:(
View 3 Replies
View Related
Nov 28, 2007
I need to find a way to close a file (spreadsheet) if it was left open by a user before my scheduled macros need to delete and remake that file to update it. Is there a way to do this in Access? I've been looking for scripts everywhere... Any help is greatly appreciated. Thanks, Rick.
View 1 Replies
View Related
Dec 8, 2014
I'm very new to access database and I'm trying to create a macro that allows the user to enter data after seeing a mistake in a form. I need a macro that will open the specific table and record of a piece of data. For example there is a student TestName3 whose grade on a competency is 30% but should really be 45%. I want a macro by the competency percentage to allow the teacher to edit that without looking through the entire table. The macro should prompt first to ask if the teacher is sure they would like to edit, second prompt asking for the student's unique ID number, and finally be taken to the specific record and table related to that competency.
I have tried to use a vastly overcomplicated DLookup and Order column to give me the value for a acGoTo search.
Here's what I have.
Option Compare Database
Dim answer As String
Dim response As Object
Dim gotoresponse As Object
Private Sub Command71_Click()
On Error GoTo Command71_Click_Err
[Code] ......
View 5 Replies
View Related
Aug 24, 2006
Hello, fantastic site you have here!
I have a form based on a table called TermWithPaysStoredData that shows a single row for everyone in the table with a small amount of info from the table and has controls for a user to enter dates which writes to that same table.
I have a subform that reads that same table but has much more information about each row. I would like to add a button to each row of the main form that says "More Info". When clicked, it should open the subform to the same employee.
The field I want to match is called ID. My main form is called fTermWithPays and my subform is called fTermWithPaysMoreInformation.
I tried using the OpenForm method but that either opens the form to the first record or filters and shows only one blank record.
I'd like to use a macro for this if possible because I don't know VB.
Any ideas? Let me know if more explanation is needed.
Thanks very much!
View 2 Replies
View Related
Oct 15, 2013
Is there anyway to reset a query or macro when you open a new record? My database seems to be holding on to data from the previous record. The data is gained from two queries and one macro.
View 1 Replies
View Related
Mar 7, 2013
I have a button using a macro to open a form in Hidden mode. Then I have another button on another form to open this form that was hidden.
When I open the form, the form is virtually blank apart from the form caption name. But when I close this and press the button again the form opens as normal.
I do not understand why?
I was told that once you hide the form and when you open the form again, it should appear normal. Why do I get this blank form??? Only by hitting the button again then the form is normal....
View 13 Replies
View Related
Oct 21, 2015
Without having made any changes to my setup, Access now crashes when I try to open a Macro in design view. I have checked the Trust Center and the folder where my database is stored is trusted (including sub-folders).
I am running Office Pro 2013 with Windows 8.1.
View 5 Replies
View Related
Oct 31, 2013
I have a VBA program which is stored in an Access database. The program creates letters using Word template documents as well as new Excel sheets. When one of the users in my team undertakes this process she is unable to create the files (although she could before). The following error message occurs initially for the word documents:
"The document could not be registered word 2010. It will not be possible to create links from other documents to the document"
When I enter debug and attempt to run the code again the file opens but subroutine halts again and I get a different message:
"Could not open Macro storage"
The line of code which is identified for both errors is:
Set wdDoc = wdApp.Documents.Open(TemplateLocation)
Where wdDoc is the a Word.Document, wdApp is a Word.Application and TemplateLocation is the path for the template
I have already checked the following:
- 'Trust access to the VBA project object model' in the Trust centre is ticked and Macro Security is set to none.
- DCOM Server Process Launcher is set to automatic in Services (Local)
View 1 Replies
View Related
May 1, 2012
I have a parent form showing some of the contents of a single record in a parent table. This form contains a button that opens a specific subform (using an IF statement based on the contents of another field in the parent table/form. There are actually any of 8 child forms/tables that could be selected and the related record is in only one of them. The relation between the tables is based on the PK of the parent table and the related FK in the child table. and the data is correct in all tables.
My problem is that when I run this button on the parent form/table it returns the appropriate form/table, but displays the first record rather than the related record. In the past (using this same process) I have been successful in getting to the right record by fiddling with the where statement (sometimes putting in a equal sign or taking it out fixes the problem). However, no matter what I do to the Where statement nothing works. I have not yet placed the final else condition for where the form selection field (VMValIdentType] is empty yet as there is no point at this time.
Here are the button macro contents:
If [VMValIdentType] = "Software"
OpenForm
Form Name: tmpVMValSW
View: Form
Filter Name:
[code]...
View 7 Replies
View Related
Apr 10, 2013
I have a macro set to email a form to a person once a condition is met. This works fine but I've discovered that Outlook (2010) has to be open BEFORE this macro is invoked.
I wanted to add a step to the macro before the one that makes it email that basically says to open Outlook.
I have tried the RunApplication macro, but I apparently am not getting the path right. I don't understand what the problem is.
I accidentally dragged Outlook to my desktop and therefore created a shortcut from my Start Menu, but now when I go to Microsoft Office in my Start Menu, Microsoft Outlook isn't one of the options. I can't find the path to where it may reside now.
I am using the path to the shortcut on my desktop.
C:UsersJust MeDesktopMicrosoft Outlook 2010
What else am I supposed to do?
View 8 Replies
View Related
Sep 21, 2014
I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
View 5 Replies
View Related
Aug 16, 2007
Is there a way to print a report from a form by using VBA or a macro? If so how can this be done?
View 1 Replies
View Related
Jan 18, 2013
I have a form in Datasheet view and when you click on a record in that form I want it to take you to a report with all the details of that record number. I have the On Click event set to run a Macro. The Macro is as follows:
OpenReport
Report Name Incident Report
View Report
Filter Name Open
Where Condition =[Event ID]=[Reports]!Incident Report]![Event ID]
Window Mode Normal
This Where Condition works for me open another form from the form with the same Event ID. Why does it come to a "new" Incident on the report?
View 1 Replies
View Related
Oct 3, 2013
What I want to do is save a daily report to a map source, each day the map name changes so for today the map name is "Report2013-10-03", and tomorrow the map name will be "Report2013-10-04".
Is this possible? is there some function like save(Report%s) where %s = date() ?
View 4 Replies
View Related
Sep 26, 2013
I want to sent out my report as a pdf file with my macro.. I've been trying to use the VBA
Code:
Option Compare Database
Sub Fix1()
DoCmd.SendObject acSendReport, "MarketRiskControl_HighestDiffs_AsOfCurrentDate", "PDFFormat(*.pdf)", "my mail@mail", "cc", , "SD Counterparty Report as of Current Date", "Regards, Trading Risk Control", False
End Sub
But this doesn't work, get run-time error 2282..
I am using access 02.
View 1 Replies
View Related
Sep 17, 2011
I want to be able to have a report automatically generate at the beginning of each month and save it as a PDF file and have that report saved to my access database.
View 3 Replies
View Related
Jan 7, 2015
In Access 2007 is it possible to alter a macro so I can print 2 copies of a report. I have created a simple macro which opens up a report based on a value in a data entry form. I want to automatically print 2 copies of the report. Is this possible....
View 1 Replies
View Related
Jun 23, 2006
I have two date fields that I am using a form to show the open and close date of an investigation. The opened date field is controlled by a textbox elsewhere on the form, but the date closed is controlled by the vbCalendar control. What I am trying to do in coding is to evaluate whether or not the closed date is before the open date. If the date closed is before the date open I would like a message box to open that prevents the user from moving forward and reminding them that the date closed is earlier than the date open. Is it possible with the vbCalendar option being able to change its focus continually.
View 1 Replies
View Related
Dec 13, 2014
I am facing an issue The Custom Macro Stopped report from rendering. I have report which is having two sub reports inside. The report is opening in the report view properly but when the ExportWithFormating macro runs, it throws this error.
View 1 Replies
View Related
