Make Voucher

Sep 18, 2007

I am trying to figure out how to make the information that I put into my voucher form and subform come out into a report that I make up so it prints out like a vouchers. So far all I am getting is error messages.
Can anybody help?

View Replies


ADVERTISEMENT

General :: Keeping Record Of Voucher Code

Jan 3, 2013

I am currently in the middle of creating a database as a means of keeping records of vouchers codes. When someone uses a voucher, I will then be able to input the name of the customer with the voucher code in the form.

This is meant to do two processes:

1. Keep a record of who has used a voucher
2. Check and validate the voucher code (the codes are kept in a table).

Now, I have created 90% of the db to input the customers details etc BUT...I am struggling for the validation part. Ideally, the db would also remove the said voucher code from the table so the same voucher code can not be used more then once.

I was going to "pre-install" the voucher codes in the db and then print off the vouchers for distribution. But I am basically tying to make the system so that it cannot be abused (for obvious reasons)...

View 1 Replies View Related

Column Names. Can I Make The Name Field "higher"? (to Make Room For More Lines)

Sep 25, 2006

I'm currently working with a form, which is in datasheet view. I have many rows which are combo boxes (yes/no), and the name is rather long. So each line (each row) spreads on to 2-3 pages to the right.What I would like to do is make the namebar, on top of every column, a little bit higher, so the name would be split into two lines, or three. Allowing me to make the width allot smaller.Here is an example of my problem:http://213.213.137.96/~terminal/columns.jpgSo my question is, can I change the height of the column name? Or is there some trick I can use?regardsFrímann Kjerúlf

View 1 Replies View Related

General :: Make A Copy Of BE File Rather Than To Make A Copy Via Code

Nov 26, 2012

Would it be ok just to make a copy of the BE file (every so often) rather than to make a copy via code?The user can then just paste over the original if it becomes corrupt.

View 4 Replies View Related

'Make MDE File' - Gone..

Jun 8, 2005

Hey guys.. I am trying to make my DB into an MDE file however that option which is in Tools > Database Utilities is not highlighted on this particular database. Anyone know why? Thanks!

EDIT - This features seems to be inactive on all atabases on my computer (I haven't tried another computer yet). I am using Access 2000 and running Win XP Hme. SP1.

View 6 Replies View Related

Make MDE Error

Jul 15, 2005

I'm trying to make and mde file but when it runs I get a error unable to make mde. Where do I start looking into this?


Jon

View 1 Replies View Related

How Can I Make This Calender

Oct 15, 2005

Hi all

in the attachment there is two pictures for a form with interesting calendar to chose DOB

any one know how to do something like it


Thx

View 5 Replies View Related

Autolooks - How Do I Make Them

Jun 25, 2006

Hi

I'm making my first commissioned database and I can't get my head around auto-lookups.

At the moment, I'm only working with tables because I want everything properly formatted and working at the table stage before I move on to making my forms, queries, reports, and eventually the switchboard.

What I want to do is when I call up a particular ID number in a table which has corresponding data in another table, I want the corresponding data, such as names and phone numbers, to come up automatically within the table.

My database has about eight tables in it and all are linked in someway, either because I need to create lookups, or because they will eventually be subforms.

So what I need is for someone to explain an easy way to get the tables to do what I want. I've looked up the Dlookup function in Access Help but it didn't make sense :confused:

Can someone help me please? I would REALLY appreciate it.

Thanks.

B-E

View 1 Replies View Related

How To Make A Title!

Apr 17, 2007

Hello!

In my form I have the title of a CD which is under the name of 'CD_Title' which is taken from my CD's table and I was wondering how to show it up in a Label so when I flick through the albums the Label changes to the album that it is selected!

I need to know...please help me!

:(

View 3 Replies View Related

Got The Code, But Can't Make It Run

May 15, 2007

I'm having a total brain freeze here.

Last week, I posted for help getting an email (with attachments) sent from inside an Access database.

With some help from my friends here, I fought through the issues and got the code in the module to work, when tested from the immediate window.

Problem is, I can't figure out how to tie it to a macro or event or anything else that will let me push a button and have it run.

I need nuts and bolts details--- how do I run this module?

BeckieO

View 3 Replies View Related

Too Many TableIDs To Make An MDE

Jul 19, 2007

Being an Access newbie and all I knew nothing about the maximum number of TableIDs being 2048...really I just found out about TableIDs when the error message popped up. :o
Is there a way around this, short of revamping the entire database?

View 2 Replies View Related

Make MDE Problem

Dec 28, 2007

Hello all,

I have a front end/back end app in AccessXP/Sql Server. I have a master version of the front end on my pc, and each user has a copy on their pc.
Everything works fine. I wanted to go the last step in securing the project, so I converted to an MDE. Now, on some of the other PC's, any field in a form that has "NOW()" as the default value (unbound fields) displays the #NAME? error.

Any idea why it would work fine in a .MDB, but not in an .MDE?

Thanks
Mark

View 7 Replies View Related

Make Table

Dec 22, 2005

I have 3 tables with which i want to extract columns from each of them and place them into a new table. The problem i have is that none of the tables share a common member. each table contains the same amount o rows spo when outputted to the new table will match up

View 1 Replies View Related

How Do I Make A Compound Key?

Jan 31, 2007

Howdy all,

I'm attempting to set up a junction table.

The help for junctions says to make a compound key in the junction table, but I don't understand the intructions for this. Do they mean make all three of ID's the junction table PK's or is there a literal "Make a Compound Key"
button somewhere?

Currently, the table has an AutoIncrementing field as the PK and the two FK's copied in from the Primaries (converted from Auto to Number). As a result, I can only make one-to-one relationships to the junction table.

Please let me know what it is I am missing here.

Thanks

View 4 Replies View Related

Make New Table From Another

Apr 9, 2007

Hi
How to create new table from other with vba when the one table has records and the key record must be transferred to the new table.

Thanks

View 2 Replies View Related

Can I Make These 2 Queries Become 1?

Aug 10, 2005

I have this query:

SELECT testScreen, Count(ID) AS testCount FROM SERPTestInput GROUP BY testScreen

It returns a count for each testScreen that appears in the table.

Then this query returns the same thing except it joins another table and adds the criteria that the status for the record must be successful.

SELECT testScreen, Count(testID) AS myCount FROM Results RIGHT JOIN SERPTestInput ON (SERPTestInput.ID=Results.testID AND Results.testStatus = 'Successful') GROUP BY testScreen

So both queries currently generate an 8 row table with the first column being the testScreen and the second being a count. I would like to somehow combine the two so I get a three column, 8 riow table. Column 1 would still be the testScreen, column 2 the total count for each testScreen and column 3 would be the successful count for each test screen.

In short, can the above two queries be combined into one?

View 4 Replies View Related

How To Make This Query?

May 15, 2006

I have a little problem with making a query and would need your help.

I have the following temporary table that gets filled automatically with 2 records every day:

DATE | TIME | NAME | CODE

The first record will have the DATE, TIME, NAME ( always the same ) and the CODE that can be START or STOP.

What i need, is to put the 2 records from the same day in a single row to get something like that:
NAME | DATE_START | TIME_START | DATE_STOP | TIME_STOP | NAME

Until now i was able to make 2 different queries. One can give me the START info's, the other one the STOP info's.
My question is if there is a possibility to combine those 2 queries or to make one query to get the result i need.

View 2 Replies View Related

Can Somebody Please Tell Me How To Make This Work!!!!

Aug 11, 2006

if i do 2 at a time it wont work
but 1 at a time works, why is that?????

insert into room values ('00012','1A','B','120','00002','Sports Hall','N','0');
insert into room values ('00013','1B','B','20','00002','Changing Rooms','N','0');

Somebody please give me an answer

View 1 Replies View Related

How Can I Make This A IIF Statement

Nov 2, 2006

Hi again everyone,

I'm stumped again.

I have two tables that my query is looking at.

1. tblProgramActByDay
And the other is:
2. tblProgramByProductByDay

I’m trying to tell the query to
A: Look in the Program ID Field
B: if the Program ID Field = 1667100
C: Go to the table tblProgramByProductByDay

---- In that table look for the criteria---

The Field Program ID must = 0
The Field Product ID must = 38648800
The Field Locale must = en_US
The Field Report_Date must = The Current Month

If it does

Total the amount in the Sales Field from the table tblProgramByProductByDay

If not

Take the total sales for the current month from the table tblProgramActByDay

View 1 Replies View Related

How To Make That Query

Oct 31, 2007

I have 2 tables: first table has 4 columns:
/job code/project1/project2/project3/
job code is some digits, and in next columns are the job description (different for each project).

The second table has
/project name/job code/description/working hours/date/

I made the query what shows how many working hours was consumed for each project monthly
and my working codes, but I would like to have job descriptions after job code, If its project1
then the description should be taken from first table from the column "project1". Is it possible to do it with
query?

View 1 Replies View Related

Make A Box Invisible

Apr 22, 2005

I belive I have done this before but I cant remember how!

I have a continuos form with two text boxes on it and a check box.

I am trying to say if text box1 = "1" then text box 2 is visible if text box 1 = 2 then text box 2 is invisible. I am doing this on a tick box (for other reasons) so my code looks like this:

If Me.Text1 = "1" Then
Me.Text2.Visible = True
End If
If Me.Text1 = "2" Then
Me.Text2.Visible = False
End If

It works, kind of. The trouble is because its a continuous form all the Text2 boxes become visible or invisible depending rather than just the one record i'm working on. Is there a soloution to this?

View 1 Replies View Related

How To Make Text Box Appear?

Aug 30, 2005

I haven't used Access in a looooong time and building a document tracking database for work. I am setting up my data entry form and would like to have a text box appear depending on the selection from a combo box. So, if the user selects "In Review" a text box will appear for entry of the reviewer's name, likewise if the user selects, "In Work." In the other cases (options in the combo box) the document is not being revised, so no name needs to be entered--so no need for the additional text box. Make sense? Any guidance/advice as to how to go about this? Thank you!

View 3 Replies View Related

HELP M!!!!! With Make This Form

Oct 8, 2005

hi i am making a database and i need some help trying to make this form if anyone can tell me how to make this form can you MSG me!!!!!!!!!!!!!!!!!!!

i trying to make this Form

http://office.microsoft.com/en-au/templates/TC010178391033.aspx?CategoryID=CT011366681033

it the CALLS tab on the form

anyway thanks for trying to helping out if you dont know how to do it

View 2 Replies View Related

How To Make A Check Box?

Feb 24, 2006

What I would like to know is, how to make an Option Group that allows for multiple choices instead of one. MS explains in detail for a single choice only, or you can use their Option Group Wizard (again single choice)?

View 4 Replies View Related

Make My Tab Control Go Away, Please!

Sep 11, 2006

I'm upgrading a form that was designed a while ago (not by me). It has various text boxes/combo boxes/etc. and one tab control that has 3 pages (TabCtl87). It works fine, I want to leave it there. My goal is to create another tab control on this form with two pages. One will include combo boxes and (hopefully) TabCtl87, which are already on the form. The other will have a new subform.
My problem is this: I set up the new tab control and cut and paste the combo boxes and TabCtl87 on the first page. When I click on the second page, which is where I want to put my subform, TabCtl87 still shows up!

I tried:

Me.TabCtl87.Visible = False

in the On Click event of the tab on my second page.

But it won't go away!

I also tried embedding my subform over top of the dreaded TabCtl87, but the tabs show through and make a mess of everything.

This is the first time I've delved into the world of Tab Controls and it's ruining my day (several days, actually).

Thank you!

View 6 Replies View Related

How To Make Forms Available On The WEB

Feb 13, 2005

Hello all,
I am looking to make my company's access database (forms, reports, etc) available through a web server. Any idea what type of programming will be needed (ASP, JSP, PHP)? What would be the best way to go about this? If there is anyone that can help me with this please let me know. I am willing to compensate them for their time and help. It should be a fun project.

Thanks,
ovadoggvo

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved