I'm having problems making a command button(Ta bort från engelska till svenska) of a delete query.
The name of the query is"Ta bort från engelska till svenska", which is also the name of the button on the form(huvudformulär)
Could someone please help me.
I'll enclose my zipped database.
I have a delete query in my database which I would like to run from a command button on a switchboard. When I use the command button wizard, it does not show delete queries in the menu of available queries. If I create a command button manually I will need VBA code for the event procedure.
Can someone give me an appropriate code for running a delete query with a command button?
All I am trying to do is insert to have a form with a "Delete Record" button on it. The problem is I don't want anyone to be able to delete a record, I would like someone to have to insert a password to confirm the delete.
or If([status] = "Washed" then me.[searchali].visible = true else me.[searchali].visible = false)
an other variations of this and I can't get it to work. I've set the command button to visible = no to start with and the bound column of my control to 0 since I want the first column criteria.
If anyone can see where I might be going wrong, or if there is another way of doing this I would be sooooo grateful! thanks, Sie
I. The two issues I am trying to address is to see if there is simple code that can be used to make a command button flash.
II. I need to show in a small pop-up box users that have expired licences. When the main License form is first called to open, I would like a smaller pop up box or preview form to open up(without operators except for the close button). The pop-up box will be based on a query that already exists to show those with expired license. Can the form be similar to the pop-up calendar found in Access already?
Private Sub DeleteRecords_Click() Dim db As Database Set db = CurrentDb db.Execute "Delete * FROM tblJune 2005 applicants;" End Sub
I am trying to delete all records from a dabase created in access. When I click the command button, I get this message: "User-defined type not defined"
Good Evening, I wonder if anyone could help me please......... I have found Ghudsons attached ‘Browsing2’ example to be of enormous benefit/use to me when I have been creating various Databases, however I was wondering whether Ghudson or any other kind person(s) would either show or point me in the right direction as to how to create a ‘Delete’ facility which is very similar to the ‘Open’ command button on the continuous form.
I have attempted to adapt the enclosed 'coding' to see if it will come up with the result that I want, but unfortunately I cannot!
Attachment kind courtesy of Ghudson http://www.access-programmers.co.uk/forums/showthread.php?t=97787&highlight=browsing
Your help or assistance in this matter would be very welcome...........
I have created a form where data is entered. I wish to place a command button on the form and when it is pressed, it deletes data in specified textboxes. The texboxes are: LAST_NAME, FIRST_NAME, MIDDLE_NAME.
I assume this is done using vb, but I am clueless.
I have created a form and need to be able to delete employees from a table. I built a command button using the wizard and this is the current vb code-
Code: Private Sub cmdDeleteEmployee_Click() On Error GoTo Err_cmdDeleteEmployee_Click
DoCmd.RunCommand acCmdSelectRecord DoCmd.RunCommand acCmdDeleteRecord Exit_cmdDeleteEmployee_Click: Exit Sub Err_cmdDeleteEmployee_Click: MsgBox Err.Description Resume Exit_cmdDeleteEmployee_Click End Sub
But when I click on the button I get a message saying it would create duplicate data in the table.
I am trying to create a command button that will delete the current records in both the subform and main form.
I know how to create a command button that will delete the current record of which ever form I'm in (either the sub or main form) but I wish to do so both at the same time with one event procedure. I currently have been experimenting with a button in the subform but I don't really care if it's in the subform or main form.
I want to create a form that will be the layout of my storage warehouse. I actualy have a layout on paper but was thinking of doing it on a form for the users to have a better view. The location of the inside warehouse have 60 location or Bin. The outside one has 80 Bins. This will need 2 query. 1 for the inside Bins and 1 for the outside Bins. They are both the same query except for the caption of each command button.
What will be the beast way to create the query as to the criteria is to read from thee caption of the command button. If the caption is 50 then give me everything in 50.
Hello, How would I go about in making a command button bring up a report to show a result of items for the end of the month? For example, when a user clicks on this button it will bring up a report showing all the items that are out of date for the end of the month. I am having problems with the query as for months have different lengths e.g. 28/29/30/31 days. How would I make a query show the end result for each month correct as February if going to be different each time i.e. when it is a leap year. I have got far but having trouble with this part. Hope you can help.
I have a query that is run off a form. When the query opens up there is a field you can enter data into. Once you close the query the data saves into the proper place in the table. That all works great.
I'm trying to make this as user friendly as possible. Instead of having someone go up to the "x" in the top right hand corner to close the query can I place a command button in the query that is very noticeable?
I have a query: qryNoSurgery with linked tables tblSurgery(many) to tblPatients(one) where tblSurgery!SurgeryDate criteria = Is Null. When I run the query by itself, it works perfectly. I get all the tblPatients data where SurgeryDate field is null.
I created a command button that opens a form, frmPatients, If I enter qryNoSurgery as the filter argument in the embedded macro and run it, I get a Msgbox which wants me to enter a parameter for qryNoSurgery!SugergyDate.
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
I have a form with a subform (FindBuffer_Form) which I built from a Query (FindBuffer_Query) within the query criteria I have the following (Like "*" & [Select the main Batch Number] & "*")in order to search a particular number.
I want to be able to run the Query from a command button on the main form and have the results appear in the subform, If I have the Source object of the subform set to Query.FindBuffer_Query I get prompted twice to answer the Criteria before the form opens, after the form opens the subform is generated as per the search criteria.
Ideally, I want the form to open with no data in the subform run the query from command button and have the result in the subform.
I'm currently working through developing my first database.
Basically, what I would like is for a query to run from a command button.
The query should look at a field in a table (a yes/no field) and report back the ones that have been filled in.
I know how to run the query from the access 'Query' window, BUT, I would like this query to run from a click of a command button on a form.
I've looked it up in a book, which explains about SQL, and didn't really understand it. I've also searched on here, but people talk about Macro's, and I don't know anything about them.
I have a dashboard-style form that has a list box with tasks connected to a query with line items of those tasks.
I have another query that will only show the line item selected from the list box. This means the query will only have one line item.
I want to have a command button below the list box that, when clicked, will modify the solo item in the second query to change a yes/no field from no to yes.
How can I accomplish this? Also, how can I make a button that deletes the selected line item?
How can I automate different printers for different reports on the same MS Access 2007 database, without having to select the printer each time?
There are two reports that are printed on the same database. Previously, I had automated form buttons to print the reports, without having to select the printer each time. This was about 8 years ago, but I don't remember how I did this. Also, I don't know SQL. Nothing against code, but I did not know how to program, and just MS Access 2007 access itself.
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Hi, I have got a small problem and maybe someone could advise me. I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click() Me!itemquery.Requery End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.SpecialEffect = 2 Me.Labelsearch.BackColor = 255 Me.Labelsearch.ForeColor = 10092543 Me.Labelsearch.FontItalic = True Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.ForeColor = 255 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single) 'Come back to initial state when button release' Me.Labelsearch.SpecialEffect = 1 Me.Labelsearch.BackColor = 16373685 Me.Labelsearch.ForeColor = 8388608 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End
If I create a command button with the wizard and assign the code : me!itemquery.Requeryto the on_click event my form is working fine. Why is his code is not working if I assign it to a label? :o
Hello, i want to make a button on my form to input .csv files. What is the best way to do this? I simply want to click the button and be asked for the csv location, i want the csv to be imported and be formatted. Whats the best way to do this?