I have a subform on which I log the times spent on any particular project.
I have another subform on which I want to select a month and use this to select all the instances on which work was done on any given project for a particular month. I would prefer to use a pop up calender to select the month (i.e. by slecting the last day of the month in question)
Has anyone got any idea how I might do this - I am completely stumped.
I have created a combo box in my form, the options for the combo box are coming from a table. It all works fine expect for some odd reason, when I click on an option in the combo box then come out of access, when I go back into the database the one I had chosen has gone. Do you know how I do so what I put in the combo box will stay?
I want to comine the following queries into one so that I can alter the parameters from a webpage.
I have a users table that has the department in and I have a TimeTable Table which has dates and option codes.
I need to select everybody in a department in the example it's Logistics. I then want to link these people to the timeTable Table based upon a field. The problen is that I want to select only a specific week. I can do this using two queries but that isn't going to work in ASP.
The Results should be as follows:
Person Date Option A B 01/10/2005 1 B 02/10/2005 2 C 01/10/2005 1
The two Queries look as follows:
SELECT TimeTable.* FROM TimeTable WHERE (((TimeTable.Date)>=#10/24/2005# And (TimeTable.Date)<=#10/30/2005#));
The above is then saved as Query1
SELECT Users.*, Query1.*, Query1.TimeOfDay, Query1.Date FROM Query1 RIGHT JOIN Users ON Query1.UserID = Users.ID WHERE (((Users.Department)="Logistics")) ORDER BY Users.Surname, Users.Firstname, Query1.TimeOfDay, Query1.Date;
I have several tables linking our employees to certain supervisors, etc.On the Form, there is a drop down with all employees listed that someone can select and then enter the stats required. When someone leaves the firm, I want to remove them from the form dropdown list, but not delete them from the corresponding table. I have seen this in other databases where they someone added an 'Inactive' column with a Yes/No response and when you selected the inactive - yes, that name would disappear from the form when people select names from a dropdown to enter stats.how to make the names disappear from the view in a form, but not in the table related to that form?
Hello everyone. I am very new to databases, may have bitten off more than I can chew, but I was tried of working in 4 different spreadsheets and decided to pull them all into a database so that I could get what I wanted when I wanted. Here is what I need to be able to do: In a table I have 3 different industries entered 5 different times. They all cover a Monday to a Friday. Each day for each industry I record a reading from a meter. I make a calculation by subtracting Mondays number from Tuesadays, Tuesday from Wednesday, Wednesday from Thursday and Thursday from Friday. This calculation gives me how much water each industry used each day, over 24 hours. Doing this in a spreadsheet was simple. My table has the Industry name, date, previous day meter reading, present day reading. I want to have the calc show in my query. How do I set up this calculation. Any help would be greatly appreciated. Thank you. I attached a sample database that contains the table and query.:confused:
I have a subForm set to continuous forms. I need a field called txtStatusDetails required (cannot be null) if the field txtDutyStatus = "Not Available"
Here's what I have so far:
Private Sub Form_Current() ' This procedure runs after the record changes. On Error GoTo Err_Handler ResetAvailability Exit_Proc: On Error Resume Next Exit Sub
I would like a query to return dates based upon the input of just the day and month. At the moment I have a parameter query which asks for 'start date' and 'end date' and this works fine, but I want the query to return all the records for all the years in the database and not just the current one (date format is dd/mm/yy)
So if I type <start date> 01/01 and <end date> 02/01 the query will return:
I am looking at creating a query which would report whether a specific field is yes/no. However, I would like it to based on that days specific month. For example, I have 12 check box fields, one for each month, and I would like to create a report where it would look up whether or not the current month has a check box in it. Additionally, I would like to create another where the criteria would require me to put in a month to search for. For example, to search to see whether or not december has been checked.
I have a form that contains a list box with 11 separate options. Within this list is the option named "None". My desire is to have a message box displayed when any option is selected other than "None". I have searched various threads, however I have been unsucessful nailing down my issue. Thanks in advance for the assistance.
Is there a way to take a form, select the fields that you want to display on a template(I created the template)? Then the fields that aren't selected grey/disable them? In other words. We perform several tests, ie. test 2006.01 and 2006.02 etc. Each test is based on 1 table. So instead of having to go in each time a new test is needed, can I create a form that has selectable fields(checkboxes), and once I say ok it opens the "new" template it will have the fields that need to be on that test then grey out the ones that aren't going to be used this time around? Sort of new to this....
I am learning Access fairly quick, but still a newbie and stuck on an autofill problem. I have read everything I could find and it seems there may be code involved, which I'm not sure about.
The problem seems simple enough: I want to populate field "Rate" in the table "Services" based on the selection from a dropdown menu referencing ClientID in the Clients table. Specifically, my form uses a drop down menu to select ClientID for the Client table to associate with fields in the Project table and I have imbedded another form at the bottom which contains fields from the Services table including the Rate field I want autofilled based on the ClientID selection. Here are the tables and fields I'm working with...
I need a subgrouping for a report I am working on.
I have a DateIn field that contains date as mm/dd/yy. I have managed to get a count of all of a certain type of document that came in during a certain period of time that usally spans a quarterly period. So typically there are three months in the query. I would like a subgroup that breaks the numbers up in the 3 month period by each month.
So if a total of 150 docs moved in 3 months it shows 50 moved the first month, 50 the second, etc. I believe this is grouping by month. I have not been able to determine the criteria for getting the query to group by a single month as well as the three months period being grouped by document type. Here is what I have so far.
SELECT ctblDocuments.DocTypeID, tlkpDocTypeList.DocType, Count(ctblDocuments.DateIn) AS CountOfDateIn FROM ctblDocuments INNER JOIN tlkpDocTypeList ON ctblDocuments.DocTypeID = tlkpDocTypeList.DocTypeID WHERE (((ctblDocuments.DateIn) Between #7/1/2005# And #9/30/2005#)) GROUP BY ctblDocuments.DocTypeID, tlkpDocTypeList.DocType ORDER BY tlkpDocTypeList.DocType;
I want to write an sql or vba code to delete records based on the month...For example I have a field called date which contains a date and I want to delete all Dates that are In April
Ive tried Delete from LinkTable Where month(Date) = 'April' Still Nothing
I have a form with a combo box this combo box looks up values in my STC table. The STC table has two fields STC & Resolver and each STC has a unique associated Resolver. What i want to happen is after the user has selected the STC from the combo box on the form the associated Resolver be displayed in a textbox on the form. I am ussing the following code but nothing seems to be happening:
Private Sub cboSTC_AfterUpdate() Dim ResolverSource As String
I inquired on this original thread [URL] .... to hide/show fields based on two Yes/No dropdowns.
Summary: 1. If "OtherUnivEmployeesInvolved" = "Yes": The fields "OtherUnivEmployeeFullName1" "OtherUnivEmployeeFullName2" "OtherUnivEmployeeFullName3" are shown.
If "OtherUnivEmployeesInvolved" = "No": These 3 fields are hidden.
2. If "OutsideRepresentVendor" = "Yes": The fields "OutsideIndividualLastName" "OutsideIndividualFirstName" "OutsideIndividualCompanyName" "OutsideCompanyStreetAddress" "OutsideCompanyCity" "OutsideCompanyState" "OutsideCompanyZip" are shown.
If "OutsideRepresentVendor" = "No": These 7 fields are hidden.
I have this basic validation code when a user hits the save button:
Code: Private Sub Form_BeforeUpdate(Cancel As Integer) Dim ctrl As Control For Each ctrl In Me.Controls If ctrl.Tag <> "skip" Then
[Code] .....
Within "1." - If yes is selected, I only need "OtherUnivEmployeeFullName1" required.
Usually skipping FullName2 and FullName3 would be easy using the ctrl.tag "skip" but I am already using the control to show hide these fields so how to do that.
Within "2." - If yes is selected, I need all 7 fields required.
So I need to figure out how to require fields based on those Yes/No selections because right now the form is checking every field regardless of the yes/no selections. I would also need to skip "OtherUnivEmployeeFullName2" and "OtherUnivEmployeeFullName3" everytime.
if it is possible whereby if a user makes a selection in combobox 1 it must automatically generate the given vaules in combobox2 from the selection in combobox 1.
I know how to assign an event to a combo box, but I want to be able to launch a specific link, app, or email template, based on the actual selection from the combo box. So when I make a selection, whatever program or event I assign, to that specific selection, will launch.
I currently have a form that creates a report based on a query that takes in a start date and an end date. What I would like to do is to create comboboxes that will let the user choose a month and year for the report. Is there a simple way to choose an entire month in access? I've tried using the Month() function to no avail.
The SQL statement for where I select the start and end date is below:
WHERE ((([tblData].[EntryDate]) Between [Forms]![frmByRange]![BeginningDate] And [Forms]![frmByRange]![EndingDate])
I've been trying to solve this problem for the past month and at the verge of destroying my PC! I've trawled through numerous web sites but just cant seem to figure this one out.I'm trying to get access to tell me what the next service moth is based on the start date, end date, and the frequency of service.
For example:
Start date: 01/01/2014 End date: 31/12/2015
service frequency: Every 4 months
Using the above information the service months are: 1 - April 2014 2 - August 2014 3 - December 2014 4 - April 2015 5 - August 2015 6 - December 2015