Making Controls On Form Update Automatically
Aug 3, 2006
I have a couple of drop down menus on a form i have designed which have values which are dependent on another drop down.
So, for example, when i select USA in country, the US$, appears in my currency box but i have to select US$ from the drop down when i want it to appear automatically.
Any ideas on how to do this?
Cheers
Also, i have a calcualtion attached to a text box:
[Text87] = (1 / [List93]) * [Combo85]
However, the calculation will not be performed, even on click, until [List93] has been clicked on. [List93] is a constant value and is a hidden field so how can i make access perform the calculation without clickin [List93]
Many thanks in advance
Cheers again
View Replies
ADVERTISEMENT
Apr 4, 2006
hi all,
Is there a way to make message box disappear automatically after few seconds....
Thx,
Jatz
View 2 Replies
View Related
Feb 19, 2006
hi there
I am having some difficulty with using Access (aren't we all?) ;-(
I have a table with a the following fields: START_DATE, END_DATE, RENTAL_PERIOD, DAILY_COST & TOTAL_COST.
What I am tring to achieve is that when someone fills in the START_DATE, END_DATE & DAILY_COST fields (which update the table behind the form) that the form will take the END from the START and put the result into the RENTAL_PERIOD field and then multiply this by the DAILY_COST value to automatically fill in and display the TOTAL_COST field.
It must be simple but I just can't get it to work and it's stopping me from sleeping :mad: I have found myself doing Access in my dreams which is not good!!
Any tips much appreciated - Thanks
Mike
PS I have written 2 queries which will calculate this for me but dont seem to be able to action the queries from within the form (if that helps!)
View 3 Replies
View Related
Oct 7, 2013
I would like to update the Previous Education tab based on values on the Courses tab.The aim of this is to keep a clients previous education upto date in order to append it to a CV etc.
View 4 Replies
View Related
Jan 8, 2015
I'm a maintenance coordinator for a small trucking company and I'm putting together an access database to track and manage all of our fleet maintenance. I'm rank amateur when it comes to access but I've been doing ok with it and so far I've been able to get it to do almost everything I set out to have it do.
But I'm having a hard time figuring out how to make this trick work. Here's what I want it to do. We have two groups of trailers, working trailers and storage unit trailers. We do preventative maintenance every six months on road trailers and once a year on storage units. I have a field in tblEquipmentMaster which shows the last PM date. I have a query and an report which use that LastPMDate field as well as the value of a StorageUnit checkbox to calculate what units are due/overdue for PM.
In addition to all this, I've got tables and forms set up to track maintenance records. I'm tracking the maintenance invoices as well as the details of each line item on the invoices (changed water pump, replaced tail light, PM service etc). So what I'd like to have happen is for the LastPMDate field in tblEquipmentMaster to update to the value in InvoiceDate in tblMaintenance anytime the field Description in tblMaintenanceDetails contains the text 'PM' for the unit number in question. Alternatively tblMaintenanceDetails also has a lookup field which contains maintenance codes. So the field VMRSCode could also be used as the trigger anytime the value 'PM' is selected.
View 3 Replies
View Related
Mar 18, 2015
I have a form and a subform
Which method should I use if I need to update automaticaly a field in form based on an event in subform ?
Just to be more clear, have a look in the below example.
In first print screen, student "Johnson Nick" has not completed all tests in TestA subform, the form field "DateCompleteA" is blanc.
Once a student completes all tests in Period A, I need the form field DateCompleteA to show the date that he completed the last one. (18/3/2015).
If student has not yet completed all tests in TestA subform the Form field DateCompleteA must be blanc.
Student has not completed "literature"yet, DateCompletA field is blanc
Student completed ALL his test, subform is updated, Form field DateCompletA is updated with the maximum date.
View 3 Replies
View Related
Jul 6, 2013
I am attempting to create a patient tracking database for a clinic I work in and I am stuck at one small but major part.
I have a parent form called frm_Patient_index. On this form you can enter patient details such as personal details, observations ect. I need to create a lab request form for certain tests to be performed.
I want so that a button on the frm_patient_index form opens a subform where the relevent tests can be requested via tick boxes. Now here is my problem I have managed to create all of that except for the information to be entered into the frm_lab_request automatically and get SAVED to its corresponding table. It will not save for me.
I can get the information such as Badge Number, First Name, Surname and DOB to all enter into the fields automatically but getting them to save to the table is not happening.
View 3 Replies
View Related
Nov 13, 2005
Hi!
I have two tables:
Network_Element
NE_Data
The second one is a "child" table for Network_Element.
For these tables I've created two forms: 01_NE and 02_Data, which is a subform for 01_NE.
The procedure of data completion is this:
1. Choose Network Element
2. Open NE_Data for this element (here opens the NE_Data with a filter for this element)
3. View record or add new
The NE_Data record consists of date, number, NE_number, port_number_old, port_number_delta and port_number_new fields.
Now if I add new record, I want NE_number field to fill automaticly with a value of last record (NE_number of current Network Element).
Second "wish" :-) has to do with port_number_x fields.
After creating new record, port_number_old should be filled with port_number_new from previous record and port_number_new should be a sum of port_number_old and port_number_delta, wich user will complete.
Hope it's not very complicated :-D
Big thanks for any help...
--
fahur
View 3 Replies
View Related
Jul 27, 2006
Hi all,
I have a form that displays fields from two tables. I have set the properties of Allow Edit, Allow Additions, Allow Update, Data Entry to NO. However I want to allow users to be able to add new, edit/update and delete records from the form by clicking on respective command buttons.
the problem is that the code that I am using is giving me errors that says that I "You cannot go to the specified field" I need help on proper VB code to use that will allow me to enable input and update on the records in the table.
Private Sub cmdAdd_Click()
Me.Location_ID.Locked = False
Me.Location_Parent.Locked = False
Me.Zone.Locked = False
Me.Description.Locked = False
Me.Child12.Locked = False
DoCmd.GoToRecord , , acNewRec
End Sub
Dont know if that makes any sense, but I want to add a new record and i get errors
Neeeeeed some help ASAP....
View 5 Replies
View Related
Oct 8, 2013
I'm working on a code that checks all blank/null text fields and combo boxes in a form and notifies the user if a field is not filled. The code below works if all fields are required, but I can't use it on forms that have fields that are not really mandatory. I've read somewhere on the net to use tags on the controls i want to skip checking, but that's where i get lost.
Code:
Dim stdResponse As Variant
Dim ctl As Control
' Enumerate Controls collection.
For Each ctl In Me.Controls
' Check to see if control is text box
[Code] .....
View 8 Replies
View Related
Sep 12, 2006
I am currently handling an insurance operation. I have 5 Sales Executives (SE) who receives certain percentage of commission for each sold insurance policy. SE receives their respective commission on a pro-rata basis. Meaning, if they give 4 equal monthly payment scheme to their clients, they will also receive their commission -- 4 times.
Example:
SE Commission for one sold policy is: 100.00. (Granted SE gives 4-month-term, SE will be receiving 25.00 monthly, upon cleared payment)
On my 2 tables lies the following fields:
[Table1]
SECom1
SECom2
SECom3
SECom4
[Table2]
CustPayment1
CustPayment2
CustPayment3
CustPayment4
Is it possible to automatically update Table1.SECom2 based on the figure on Table1.SECom1, once Table2.CustPayment2 is updated?
Thank you!
Sheila
View 2 Replies
View Related
Nov 20, 2007
Dear all, please excuse the fact that this is not an explicit problem I have, but more of a general query.
I have an Access database (2003) with a load of contact details in it. Including various fields for each contact, such as their email, services they offer, where they are, main contact name etc.
Some of these contact details will be out of date and I want to make sure that all the contact details are up-to-date.
I am in the process of setting up a mail merge with a Word document which will output to Word their relevant details, and this can then be e-mailed to each of the contacts with them to update and e-mail back again. Someone would then manually update each of the contact details.
This is quite a time intensive way of doing it, and I wondered is there a way of automating the process? I don't have the time to put the whole of their details on a website so they can update it over the web, but is there a way that access could possibly read the return Word document to automate updating their details? Or is there another easier way of doing it, without using word and using something else such as Excel or something.
If anyone has any experience in doing this kind of thing I would be really glad of some tips.
Many thanks
View 9 Replies
View Related
Oct 24, 2006
Hi
I have a table which has a date field in it, where the default value is Now().
How do I get this field to automatically update in the table to "today's date"?
Thanks
Maria
View 12 Replies
View Related
Jan 5, 2005
hello all
i have a problem, i have a form bounded to a query
that displays the books infos, in this form i have a list control
that displays the list of authos based on the code of the book
the problem is when i have more than one record in the opened
form ie more than one book and i move to the second record
the list doesnt change and displays the authors of the first book
when the form first opened
anyone has an idea how can the list be updated automatically when
i move between records
thanks a lot
View 6 Replies
View Related
Jul 28, 2014
why my vba code wouldn't work.I have a scorecard form, and what I wanted to do on a form was that if a user enters a number in a bound box (to a table), it would automatically update an unbound box. So I coded it as this.
Private Sub SupplierCorrectiveActionRequests_Enter()
If [Request] = 0 Then [Text30] = 100
Elseif [Request] = 1 Then [Text30] = 75
Elseif [Request] = 2 Then [Text30] = 50
Elseif [Request] = 3 Then [Text30] = 25
Elseif [Request] >= 4 Then [Text30] = 0
End Sub
But it throws an error that there cannot be Then if there are no ifs, weird.Another problem I had is that I'm using a continuous form, and whenever I scroll down there seems to be a visual bug,is there any way to do that without changing the theme?
View 5 Replies
View Related
Mar 19, 2014
In my Access form, users update 4 checkboxs when their work is completed, when this 4 boxed checked then the 5th checkbox will check automatically using afterupdate. Now i have added the 6 the column with date completed, here i want the date to be updated automatically when the 5th column is checked automatically. how to do it?
View 10 Replies
View Related
Jan 25, 2015
I have a form fmrClasses and what I'm trying to do is write a code that as soon as the user types a beginning time will update the end time to 3 hours later for example If user enters 9:00AM for beginning time the end time will be set to 12:00 pm.
View 9 Replies
View Related
Oct 26, 2011
I have created a parameter query that uses a combo box form. The people who will be using it when completed do not want to see the results in query form. Is there a way to have the query update a form or report without having to create and reformat each time?
View 13 Replies
View Related
Jul 22, 2014
I'm fairly new to using Access for any serious purposes. I'm trying to replicate some database functionality I setup in Salesforce and just trying to clear few core concepts in Access.
I'm messing around in the Contact Management template and I'm wondering how I can make it so when so when a yes/no checkbox field (called "Active") is ticked a date/time field (called "Last Date") is automatically set to today's date + 60 days.
In Salesforce I would create a Workflow Action triggered by an if Active = true statement, with a Field Update something like TODAY() + 60.
I can tell I need to create an After Insert/After Update Data Macro but can't quite figure out what to put in.
View 11 Replies
View Related
Oct 24, 2005
Most likely a newb question, but how can i just update the date/time field to the current date, as opposed to constantly entering in the current date?
Thanks
View 1 Replies
View Related
Oct 10, 2006
Hello,
I have a main form which has 2 subforms. The main form is the name of the Student. The first subform is the data entry form. It has 2 fields. One for the Trimester - a drop down which has "1, 2, 3" listed. And the second field is the benchmarks (again drop down). Now the second subform is a more elaborate way of viewing (only for viewing purposes) which standards have been chosen for which trimester. Now this form's control source is a Crossstab query, which updates the Trimester field for each of the benchmarks for the particular student.
Now my problem is I am trying to update this subform which is for viewing purposes only, automatically, so that the moment a benchmark is chosen on the other subform, the [trimester] field automatcially gets updated on this form. All the benchmarks are listed on this form (view form) and a field which is the trimester field. Data entry is not allowed in this form. So the information has to get updated automatically. It does when I close and open the form, but thats not how it should work.
I tried everything I thought possible (requery, refresh, a button to click) but couldn't get the form to update.
Please help! I would really appreciate if you could help me find a solution.
Thanks in advance
A
View 1 Replies
View Related
Mar 17, 2015
I am trying to update the range for the graph automatically and I'm calling this from Access because my data exists in Access. I've attached a sample file.what I am trying to do:
1) click on the button
2) button will update the usedrange in "trending" tab
3) have the graph's data range based on the usedrange.
Code:
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
xlApp.Workbooks.Open "C:Documents and SettingsgjiaDesktopmetric_DEV.xlsx", True, False
[code]...
note: the columns will grow bigger to the right, which is dynamic, so I've used usedrange method, but the code fails on the usedrange line saying the object or method is not being supported...
View 3 Replies
View Related
Aug 13, 2015
Is it possible to have query update only on demand and not automatically? I have a big database and some are best run overnight.
View 12 Replies
View Related
Oct 14, 2014
I have Server Inventory Database where everything is entered manually. I would like to add the ability to automatically update some of the data.
Ideally this would be done via querying WMI and inserting the values retrieved.
I would like to be able to have a button that when selected would query WMI of the server that is currently being viewed and update whichever records I define.
View 3 Replies
View Related
Dec 19, 2011
I have this small problem with datasheet:
I have 2 tables. They are connected with ID (Form1.ID=Form2.fID)
Now I made a datasheet of both of them, but the ID doesn't update automatically, how do I fix this?
View 1 Replies
View Related
Jun 30, 2014
I have data in all sorts of tables and databases that are linked together through different systems. I'd like to update some of the information automatically in the evenings or in the middle of the night without needing someone to push a button. Is there a way to do this?
View 9 Replies
View Related
