I have been trying to figure out how to make a main menu that link to certain tables I have. I want the links to go to the tables/forms so that they can be edited, but I don't want the user to be able to enter design view. I have attached an image of what I want to have below.
View RepliesI have a database with a Main Menu Form, containing a Button that loads my main data entry form. When the Button is Clicked portions of the data entry form that is loading shows through the Main Form Background (e.g. portions of the navigation bars, and portions of the boarder on the form that is loading.)
View 5 Replies View RelatedHello all, i'm trying to create a database just now and i'm banging my head a little on the forms side of things.
Can anyone tell me how, or if its possible, to create a "Main Menu" form, that gives you options to say, add a record to a table, to delete a record etc.
any help would be greatly appreciated.
cheers guys
Dear All
Since last week I am working on a Database which I will use for my company. To make a long story short, I didn't find any appropiate softwares nor examples on the internet, hence, with my some knowledge in Access, I am trying to make this "to be" useful tool for my self.
Short brief on the project:
This is going to be used for a trading company to register:
- Suppliers
-- Products
- Customers
-- Inquiries
-- Orders
-- Offers
*Relations:
- Suppliers can have one or many products
- Customers can have one or many Orders / Inquiries / Offers
Problems:
(I have tried many different ways, but going nowhere)
1) The "Customers" table have 3 tables (Orders/Inquiries/Offers) linked to it - and all are based on the primary key "CustomerId". --> How can I make a form to enter these data linked?
2) Under "Orders" I want to select supplier from the Supplier table and Product from the Product table -- How?
I know this is a lot of info and probably too vague, but if someone could assist me with a few problems - then I would really really appreciate it and compensate somehow.
Looking forward for your help.
Best regards
I have a front end that I have distributed to four users. The front end sits on a shared drive and when I make design changes I just replace it and have the users copy it over to their desktops.
I set up a main menu for them to access the various forms, reports, etc. When I first open the front end on my desktop the main menu form is small and not taking up the entire screen. I put the cmd.maximize command in the on open event and still does not maximize the form when I open the database. I tried to size it and saved changes but still not working.
I just did a share session with a user and she opened the form and it was maximized on her desktop.
how do you make the navigation controls on the main form control the subform i.e. navigating through the records or creating a new record???
View 2 Replies View RelatedSo I have made all the necessary forms to start working with my Access, and now I need a main form, a home where I should put all the buttons to enter each form.I have used the Navigation Control on a New form URL...
A row with buttons appeared, and I complete the property: Navigation Target Name with the target form, but it is giving me some trouble with a searchForm and a Query. Every time I enter this form (using nav control), Query asks for an Input.
i have built an application , all i have is one main form and every action take place inside it. Before making it as .accde file for code protection, i want to hide table pane, navigation ribbon, the Main form Tab. i.e only Main form should open like a applicaiton and not inside access as a tab.
View 1 Replies View RelatedI'm working with a form in Access 2013 that uses the navigation buttons. I'm trying to have my criteria for a query link to a dropdown box on the form. I had no problems doing this in Access 2010 with normal forms, but I can't link the criteria, in the query to the Navigation buttons form box. I'm tried using
[Forms]![TheNavigationTab]![NavigationSubform].[Form]![Field]
And various forms of the above... but i still can't see to tell the query to find the critiera at this location...
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load()
OpenTimer = Timer
End Sub
Private Sub Cover_Page_Form_Timer()
If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes
End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
Hey Guys,
Is there any way of deactivating the main Menu Bar ("File","Edit","Insert","Format") when a form opens?
I need to implement this for a single form to stop an idiot user from trying to break the system! :mad: He's not doing it on purpose - he's just ignorant and doesn't listen or understand when I try to explain to him NOT to add a record by using the "Insert - new record" command, but to use the command button on the form which has some built in safety features (such as password protection).
I've managed to get rid of some of the other ones by using the coding below:
Application.CommandBars("Form View").Enabled = False
Application.CommandBars("Formatting (Form/Report)").Enabled = False
Application.CommandBars("Formatting (Page)").Enabled = False
Any help would be greatly appreciated.
Cheers,
Rusty
:D
I have recently created a small inventory database just for fun, but I am looking to expand my knowledge with Access since I have not dealt with it hardly at all. I would like to know how to create a regular main menu to the database that gives you options on what you want to do. I would like to be able to look up inventory by serial number, edit inventory, add inventory, and run reports from the main menu. If anyone could help, I would greatly appreciate it.
View 1 Replies View Relatedmenu items is it possible to show the last 5 items entered into the database on the main screen?
View 8 Replies View RelatedHi there, i have a database i am setting up with 4 tables and am trying to think of the best way to input new data into it. All the tables are linked and its all based on printers. When a new printer is brought if it exists in the database then thats cool it just needs a Printer number assigned to it and the database will do the rest looking up printer model and what cartridges it requires. But if u add a model for a HP printer for example you need to add the model number to the tblink and create new cartridges and use the cartid to link the modelID i hope u get the picture!? lol there is a pdf i have created using onenote with screen dumps and comments about what i need it to do. If anyone has some advice or help it would be very greatful! Thanx mike
View 1 Replies View RelatedCurrently I have a basic database with the following
Table 1 = "EmployeeT" with fields "Employee_ID", "First_Name", "Last_Name" etc.
Table 2 = "NewLabReportT" with fields "Report_ID", "Report_History", "Submitted_By", "Reviewed_By", "Date_Submitted", "Report_Title", "Abstract"
Form 1 = "MainMenuF" this is where I would like to have the search
Form 2 = "NewLabReportF" with fields "Report_ID", "Report_History", "Submitted_By", "Reviewed_By", "Date_Submitted", "Report_Title", "Abstract"
Form 3 = "EmployeeF" with fields "Employee_ID", "First_Name", "Last_Name" etc.
Problem:I would like to have on the Main Menu a drop down list with all of the fields described in NewLaBReportF ("Report_ID", "Report_History", "Submitted_By", "Reviewed_By", "Date_Submitted", "Report_Title", "Abstract") and then allow the user to click a button to the side of it to alert a pop up.
In this pop up:
If they originally clicked "Report_Id" then have the message prompt then to "Enter a Report ID"
If they originally clicked "Submitted_By" then have the message prompt them to "Enter an employees Last Name"
etc...
Further More, after they enter the respective value in this box, have a FORM not a REPORT generate that lists all of the records that match the criteria. This way then can specifically click on each record individually and have it open directly up to it.
I have a table called exiting staff data and a field called Follow up required. I want to count the number of Yes entries and display it on the main menu. Have tried
Code:
=Count([Exiting Staff Data].[Follow up required]="Yes")
And using dcount but keep getting error messages.
I want to create a main menu page for my database. I have tried the Navigation form and obviously I am doing something wrong....because the tabs won't open the forms. We have Access 2010 at work and I would like to create something similar to this:
Cardinal Rap - Main Menu
[button] Input Monthly data
This button would take me to another screen that would list the tables for appropriation, expenditures and revenue, each with their own respective button
[button] Reports
This button would take me to another screen that would would list the reports available each with their own respective button
[button] Monthly reconciliations
This button would take me to another screen that would list the tables necessary for my monthly reconciliations each with their own respective button that open that table.
The tabs in the Navigation form don't seem to do anything.
I have fields on the main menu where folks put in a start and end date prior to running a report. I'm doing a monthly report that pulls current month, and two prior months of data. For example, the user selects a date range of 10/1/14 to 10/31/14 the report will show August, September and October results.
I need the column headings to change each month depending on the date range they select to run the report so in November they will pull 11/1/14 to 11/30/14 and get September, October and November.
The headings for the columns would then adjust.
I put an unbound text box with the formula as follows in the control source of the report page header to pull the month that is equal to the current month minus two (I'm just showing one of the column headings formula):
=Format([Forms]![Main Menu]![EndDate]-2,"mmmm yyyy")
This is not working. It's pulling the current month which I have set to run for October so it should show August 2014.
For some reason i'm having difficulty getting the Current Monday and Friday of the Current Week on my Main Menu. Monday shows 12/29/2014 ???
Here is the code for the scenario.
Monday: =CDate([AnyDate])-(Weekday(CDate([AnyDate])))-2+4+3-3
Friday: =Date()-(DatePart("w",Date(),2,1)-1)+4
AnyDate: Date()
I have a main menu "MainMenuF" in my database and I would like the database to be able to be searched by any of the column headings. For example I have a table titled "NewLabReportT" this table has many column headings like "Submitted By" "Reviewed By" "Title" "Abstract" etc...
I would like my users to be able to click a radio button with the same column headers on this main menu and have a box that pops up to say "Enter search parameter" and have that parameter be searched in the table "NewLabReportT" and generate a FORM not a REPORT of all of the listings in the database that have that keyword associated to that certain category searched. That way they can "CLICK" the exact field they are looking for and have it open right up to that form.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
I have 7 tables to track client data. The 1st table uses AutoNumber to create the 'Client ID' number. The other 6 tables are linked to this table, and in turn each other, through the 'Client ID' field.
All information entered in all 7 tables is done so on one form. This form has a tab control to separate the input fields.
The problem is this. If I enter information in the form, but no field in one or more of the tables gets filled (table gets left completely empty because the fields were not relevant to that record), the record does not save itself to where it can be viewed in the form anymore.
I have programmed a command button to copy the 'Client ID' from the 1st table to the rest, and so far this works, but I would like to have this done automatically without any action required by the user. I tried the 'OnDirty' for the ClientID field on the form, but I do not think that works. Mybe 'OnUpdate'?
Any suggestions?
I'm trying to create an invoice system with a sub-form within the main form. The issue I'm having is that the data in the sub-form keeps getting overwritten each time a new record is created for the main form. So when I go back to edit an older record, the data in the sub-form is changed to whatever the latest record had in it. Is there a way to lock in the data in the sub-form so that it stays with it's own record?
View 1 Replies View RelatedI have a subform which makes a change to a field on the main form. When focus is returned to the main form, the BeforeUpdate and AfterUpdate events fire. Why? I thought from the form's perspective, the subform is just another control.
BTW, I get the same behavior if I modify the field from within the Exit event of the subform control.
In either case, the main form's Dirty event is NOT triggered.
I have a subreport that works fine on its own. But, when I link to the main report I have an error, which I am attaching here.
View 1 Replies View Related