I am receiving the following error when printing different reports to several different printers in Access 2007: "The section width is greater than the page width, and there are no items in the additional space, so some pages may be blank. For example, the report width may be wider than the page width." According to my co-workers this issue began immediately following the upgrade to version 2007 from 2003.
View RepliesI wrote a custom ActiveX Control in C#.NET using a guide (Google ".net activex control step by step", first link on CodeProject). The control is compiled as a .dll and registered in Access 2007.
When I place the ActiveX control on a Form or Report, I can call its methods from VBA and see its output just fine.
When I open a Print Preview, only the top left corner of the control is shown, the rest is a blank white box. This does not happen with built-in ActiveX Controls (e.g. Calendar control), which print as they should.
I also tried a basic ActiveX Control build using VC++ (the sample control created by the MFC wizard), and that displays and prints correctly.
I have a lovely report that includes a small color photograph. I'm sending the report to print on my HP Color LaserJet, but it is printing in black and white.
I can't find anything in the Properties that specifies whether this prints in color or black & white.
How to print this in color?
I am running a very simple query that divides profit over turnover to show the margin. I have many queries throughout my database that do this, here is my little formula;
Margin: Round(([profit]/[Turnover])*100,2)
Now, this runs just fine but if I put in a criteria of <10 I get the division by zero error. The reason I am confused is that there are no zeros or error values or even negative values in either of the profit or turnover columns?
Also I have an almost identical query in another database that has a <5 criteria in it and it works a peach.
I have searched but all I am getting is the usual definition of the division by zero error.
Ok, so this one's been driving me batty for some time now. When I create a form in a new database, I can resize the design window to my heart's content, without any adverse effect to the form's rendered size. However, I also work with another database that was not created by me, and whenever I create a new form, the size of the form is entirely dependent on the size of the design window. This is extremely aggravating, as I have to pixel-by-pixel shrink the form renders the correct size. Is there an option somewhere in access or Form formatting to turn this "functionality" off, so that a form will only render the size that I designated to it, and not to its design window?
View 1 Replies View RelatedI have limited users to not show the ribbon, but I need them to be able to print of reports or export them as pdf files how do I give them access only to do this ?
View 3 Replies View RelatedI have recently changed computers from a WindowsNT to and XP. When using the NT machine, I am able to print my Access report. However, when I hook up the XP machine and request a report from one specific database, I get the following message....this message also comes up if I try to open print preview or page setup.
"There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable."
I don't think it is a printer error as the error is occurring in this one database. I have successfully printed a test page and can open up other Access databases and print. I also tried converting the database to the 2002 format....but that did not make a difference either. There must be a setting in the database that is causing the error.....
Does anyone have any suggestions???
We have run into a problem with Access 2013 when trying to print reports. The program always crashes. Have updated printer driver for the HP LaserJet P2035.
View 1 Replies View RelatedI am running Access 2013. I have created a report where the tables are linked to a SQL DB
I am trying to run a sales report that includes an stored image.
I am adding an Image and then using the control source to look up the 'filepath' stored in the DB. When I run the report on screen all the images are showing but when I try to print it (including exporting to PDF or XPS) and Print Preview only 2 of the 9 images print per page. The images are around 2-4 Mb.
I'm guessing its to do with the files sizes but cannot do anything about the size.
I have a database that dumps data to another database with an append query which is activated by a button on a form. This works fine in Access 2003 but when we load it in Access 2007 and run it it somes up with the error Reserved error (-1524); there is no message for this error.
Any suggestions as what to do?
I was having trouble just setting each report with a particular print method - for some reason they just kept forgetting their individual settings and resorting to default on the machine.
This meant reports were printing on the wrong paper, or the wrong size paper, the wrong orientation and some times refusing to print if it couldn't find the paper (which is useful in runtime as it doesn't display error messages)
So I used Reports(rpt).printer properties (I forgot where I found this) to hard code the printer properties into each print command... this meant I had to use another function to insert the variables.
So all I had to do was say:
Code:
PrintMe("Invoice","InvoiceID",iID)
and a report would print to exactly how I wanted... but it's just too slow!
See attached for full code, I have a niggling feeling it may be the function: PrinterOK, to make sure the printer exists or not.
Code:
Function PrinterOK(sPrinterName As String) As Boolean
Dim MyPrinter As Printer
PrinterOK = False
For Each MyPrinter In Printers
If MyPrinter.DeviceName = sPrinterName Then
PrinterOK = True
Exit Function
End If
Next
End Function
I know it's the printing code, because if I stop the printing and just preview then it shows up almost instantly.
I am getting "Truncation Error" while importing data from Excel to access 2007. I have tried changing the format to short text but the result is the same.
View 3 Replies View RelatedI have created a report with the report wizard in Access 2007 that includes a check box. The check box is located under the label but to the far left side. How can I center the check box under the label?
View 10 Replies View RelatedI am using access 2007 i need to know that i have a field as combined sum of apx cost with the name =sum([apx cost]) in the report section, i need the value coming in this box to be converted in text as pak ruppees.
View 3 Replies View RelatedI created a form letter as an Access 2007 report. I want the greeting to read, "Dear [first_name]," e.g., "Dear Alan,". The [first_name] field is bound to said field in a query. When I just use the [first_name] field, I get "Dear Alan" with no comma. I've tried to add the comma various ways:
"=Trim[first_name] & ",", "=[first_name] & ,", "=Trim([first_name] & ","), etc., etc.
Any addition to the basic field produces the "#Type!" error. I also created labels from the same query using
"=Trim([first_name] & " " & [last_name])",
and that works fine.
I am writing a book, using MS Access 2007 (seemed like a good idea at the time I started, and the report that creates the formatted book content works quite well).
The book content is "per paragraph" which gives me total flexibility to move content to whatever spot in the book I might wish, simply by changing the paragraph number (free field, not auto-number primary).
To save paper (or pages) in printing (or viewing) the book, I have the report printing off para by para (as many whole paras as will fit to a page). This is fine but I want each new chapter to start at a forced new page, for "presentation"/appearance sake.
The relevant fields for the purposes of this post are:
paranumber
paratext
chapternumber
forcepageifticked (a Yes/No box), which goes with each paragraph and which I thought might come in handy, I had in mind to link it to a page break control at the top of the "detail" part of the report in design view, and which would be "invisible" except if the report formatting process had got to the start of any chapter, and the Yes/no box was ticked.
Upon opening a report (it does this randomly), the report opens and it is completelty blank - no lines, lables, or fields - nothing. However, when I click on an area, the group I clicked on will render and display perfectly. So when this happens, I either have to click every where on the page or scrolling up and down (if the report is long enough) will render the whole report. It doesn't do this everytime; about 25% of the time though.
As you can imagine, when other people use the database and this happens, they freak and just think access is broken. What is causing this or what can be done to prevent this from happening?
I'm using access 2007.
I have a standard shared Access DB application (i.e. central BE on the network, multiple users running their own copy of the FE on their local machine) Has been in production for a while, no major issues.
New user has been added in recent weeks. My error logger has picked up an error he hit earlier today - doesn't appear to have been fatal (he hasn't come to me with a problem, suggesting he just "OK"d the error prompt and continued on - I need to confirm this with him though...)
Error was 3343 "Unrecognized database format 'C:TempMyDBMyDB.accde'."
Can see it was tripped on a particular form which queries certain data into a subform (so he was obviously able to open the FE and connect to the BE fine; it was several steps down the road where the error has occurred).
Code : DoCmd.ShowToolbar "Ribbon", acToolbarNo
Should hide the ribbon. Instead I get a 'Variable Not Found' error.
This should be simple.
I have DB in access 2007. I have a report that is uses a select query to generate the information for the report. It has been working great, But however lately like maybe with in the last month, it has been causeing Access 2007 to crash. I am having the same issue with another DB that uses the same information but that information is imported in. both Databases have worked great up until two months ago. Microsoft states that it is because of the program. I have tried to repair the DB by using the Repair option. I am confused as to why this would be happening. I can create a new report and it seems to work. but I do not want to change all the DB on everyone's computer just for this reason. I also have two buttons on my report that utilize macros to close or print the report.
View 6 Replies View RelatedI have a report (Access 2007) with multiple totals and subtotals. However, one field, whenever I click "show Grand Total," always shows up all akimbo (out of line with the other grand totals), unbound and without the nifty little blue "grand total bar" above it.
View 1 Replies View RelatedNot being a code person. This code worked great for 2003, but we just installed 2007. I get an error message when the this code runs:
Its a complie error
User-defined type not found
Sub ShowUserRosterMultipleUsers()
Dim cn As New ADODB.Connection.....red shows where I get the error message
Dim rs As New ADODB.Recordset
Dim i, j As Long
Set cn = CurrentProject.Connection
' The user roster is exposed as a provider-specific schema rowset
' in the Jet 4.0 OLE DB provider. You have to use a GUID to
' reference the schema, as provider-specific schemas are not
' listed in ADO's type library for schema rowsets
Set rs = cn.OpenSchema(adSchemaProviderSpecific, _
, "{947bb102-5d43-11d1-bdbf-00c04fb92675}")
'Output the list of all users in the current database.
Debug.Print rs.Fields(0).Name, "", rs.Fields(1).Name, _
"", rs.Fields(2).Name, rs.Fields(3).Name
While Not rs.EOF
Debug.Print rs.Fields(0), rs.Fields(1), _
rs.Fields(2), rs.Fields(3)
rs.MoveNext
Wend
End Sub
Currently I have five separate reports setup in Access 2010 (that are running off of five separate queries). Since they have different data/fields, I was unable to combine into one query & one report.
However, I print each to PDF and then combine using Acrobat Pro. Is there a way to combine in VBA and not have to do the step using Acrobat Pro?Function PrintReports()
DoCmd.OpenReport "Program_Summary_1", acViewPreview
DoCmd.OutputTo acOutputReport, "Program_Summary_1", "PDFFormat(*.pdf)", "C:DesktopPrintFiles" & "Program_Summary_1" & ".pdf", False
DoCmd.Close acReport, "Program_Summary_1"
DoCmd.OpenReport "Program_Summary_2, acViewPreview
[code]......
I have a form that produces Year end accounts, therefore each page is totally different from one another, there are 10 reports per set of accounts.
I have created 10 buttons that out puts the desired report
Profit and Lost, Balance Sheet etc.....
What I would like now is a way to print all 10 reports with the click of a button, how can this be done...
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I have turned off DEP.
How can I get MS Access 2007 to import Excel?
Thanks
Ken
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?