Maximized Form Coming 'unstuck'
Aug 15, 2006
Thanks if anyone can offer a suggestion, I cannot find a similar problem described on the forum.
I have a form which runs at startup maximised. Pop-up and Modal are set to 'NO', Auto Resize and Center are also set to 'NO', Border style has been set to various settings, and Moveable has also been tried at 'YES' and 'NO'.
A command button on this form opens another form with the same settings which I want to take the original form's 'place' in the application window.
This all works fine, just that when I close the second window (using DoCmd.Close), the original window is then no longer maximised underneath it. I want to make sure certain windows are maximised at all times.
I know I could hack this with a DoCmd.Maximise somewhere, (or by switiching to full Pop-up/Modal mode and hiding the Application window) but the results of these are all a bit of a hack.
Can anyone shed light on the mysteries of Access's default form maximisation behaviour?
Or does anyone do what I have described successfully?
View Replies
ADVERTISEMENT
Dec 14, 2005
Good Afternoon,
I am writting a database and i am have difficulties with forms.
What i need to do is have one form (Main) maximized and the other windows set to a standard size, the main form is always visible the others need to be opened and closed via buttons on the main form and sub forms.
I am not sure if this can be done so any help would be good.
Alastair Lane:eek:
View 3 Replies
View Related
Sep 19, 2004
Hello,
Does anyone know how I can make a form always open maximized?
Thanks
View 1 Replies
View Related
Mar 19, 2007
I bet this is a simple one.
I have a form with the on Load command
Docmd.Maximize
On this form I have a button to open another form, this works fine. On the second form I have a button to close the form. When I press this it closes, and the first form is still there which is what I want, but somewhere along the line it has unmaximised itself and is about half the desired size. Basically I want it to stay Maximized the whole time it is open.
The way I can think to get round this is to close and re-open the forms as I navigate through them but just wondering why this is occuring?
View 3 Replies
View Related
Sep 12, 2005
:confused:
I have a db app that has all forms maximized continually (I have set the vba code to do so on Open, Close and GotFocus events). From my app Home Page form the user can browse to other forms in the db. When another form is opened the window automaically maximizes. However, when the user navigates back to the Home Page it goes in restore mode. I haven't told it to do this anywhere. I have also tried saving the form stretched out to fit the full screen, so that if it goes into restore mode it at least still fills the screen, but it still reverts to a restored window (about half the screen). It doesn't matter what configuration I use in the AutoResize, AutoCenter properties either.
I have been developing custom db apps in Access for over 8 years. However, this seems to be a stupid (albeit simple) problem that is annoying me. I currently use Access 2003 and this issue is new (or so I believe since I never ran into the problem in previous versions).
Any ideas?
Thanks...
View 6 Replies
View Related
Apr 25, 2014
I have a front end that I have distributed to four users. The front end sits on a shared drive and when I make design changes I just replace it and have the users copy it over to their desktops.
I set up a main menu for them to access the various forms, reports, etc. When I first open the front end on my desktop the main menu form is small and not taking up the entire screen. I put the cmd.maximize command in the on open event and still does not maximize the form when I open the database. I tried to size it and saved changes but still not working.
I just did a share session with a user and she opened the form and it was maximized on her desktop.
View 3 Replies
View Related
Jun 6, 2013
I'm using overlapping forms in my Access 2010 database.
When the form(s) open I want them maximized and I don't want the restore buttons to be available.
I have the Min Max Buttons set to None.
I have DoCmd.Maximize in the On Load.
I want the border style set to thing.
Is there any way to prevents the Restore button to be enabled?
I open the first form it's maximized as per the DoCmd.Maximize in the On Load. I then open another form (which has nothing to do with the first form) and it opens maximized. When I close the second form the first form is no longer maximized, it's restored.
View 2 Replies
View Related
Jun 23, 2006
hi i have a button that loads a report. If i then close the report the form, which is set with no border/no max/min/close/non movable and opens maximised, places itself off centre. I want it to stay maximised full screen. The only work around i currently have is when the use moves the mouse over the form it maximises itself. Will this then be calling this function everytime the mouse moves(cant be very efficient). is there a better way to maximise the form Immediately after closing the report.
View 5 Replies
View Related
Mar 5, 2007
Greetings all.
I've got a minor housekeeping issue with my db that I can't seem to crack.
The db opens to the main form, which has a boat-load of control buttons that open a variety of forms and reports and 1 query.
The problem is that when you select the button that opens the simple query, the query opens in maximized view and then when folks want to close it, they often end up closing the whole db, instead of just the query. (Using the right corner X.)
I'd like to open it about half screen or so, to avoid the accidental closing of the whole database.
I can open the query directly or from the macro and in both instances it opens up the correct window size. But when I use the button it opens maximized.
I've searched the code, can't find any reference to maximize.
Can't find anything in the button properties that would cause it.
Any idea why this is happening or how to get around it? It's probably something simple, but then, so am I. (hehehehe)
Thanks,
BeckieO
View 1 Replies
View Related
Oct 28, 2005
Hi All,
I want to load switchboard in maximum view only, but all other forms in a popup like format.
I have the Swithboard_On-Load, docmd.maximize, but when I select a menu item from switchboard that form opens in max-view. If I make that form Popup=Yes, it works, but then any command button [printview] will bring up a form behind the "popup" form.
How can I get just the switchboard to stay in max-view only?
I don't want to have to modify all forms and reports so that "popup"=Yes
Any suggestions.
thanks....
Enviva
View 1 Replies
View Related
Feb 8, 2006
Hi allive just been asked this by a co worker on a remote sitethey have a client name they want to input to a table in Access 2000in a surname field which is just a txt fieldthe name to be input is 'comming'when they tab to the next field access changes it to 'coming'i tried it this end in a new database and it does tha same thing ..and in Acc 97any thoughts ...or a fix?Thanks
View 3 Replies
View Related
May 4, 2005
I have built a table with a field name of Birth date and have applied an input mask to have the data shown as: ##/##/##. Now, I would like to have another field labeled age. Is there a formula that I can create to have access calculate this in my table? I have tried "=mydate()-"Date Of Birth"" in the validation rule under the properties of the Age field; however, I keep getting an error. Any suggestions?
View 2 Replies
View Related
Sep 15, 2006
This is I think a very simple query.
with a number of forms/ queries etc open and you click on at the back it is not coming to the front for amendment.
It is probably an indicator somewhere but I just can't find it
any help appreciated
Ta
humph
View 3 Replies
View Related
Nov 6, 2006
Hello,
I have split a database useing the database spliter wizard. But I still have network speed problems. What I am wondering is if anyone knows if useing an ODBC connection between the front and back ends is more efficient than file sharing across the network?
Thanks for any information on this
Tim
View 4 Replies
View Related
Aug 19, 2005
Hi,
i was working with a database and accidently deleted the first row, i couldnt get the automatic number to number another row 1, so i took out this table and created another one. however even though my new record is in order, when i pull this through to the website it's coming in the order 1,3,4,5,6,2... and the coding for the page worked fine with the db beforehand!!! so now i'm a bit lost
if anyone has any ideas, they'd be appreciated!!!
Thanks in advance!!!
Megan
View 14 Replies
View Related
Sep 6, 2012
I have an Inventory DB Table called [EngData] that has a subform table called [Inventory]. I have in the subform a calculated text box that Sums three columns, StockQtyMade, StockQtySold and StockQtyShrink. This works perfectly.
On the Main form I have a calculated text box that references the subform calculated field. This also displays correct info.
On another Form I wanted other users to see the total stock on hand by using a calculated field called PullTotalQty. This is set by using DSum(...). The only problem is that the DSum(...) keeps giving totals that are not accurate. Sometimes the quantity is a few pieces less then the correct amount and in other cases the qty is many times what it should be.
Whatever the amount in error it is consistent each time a particular record is displayed. I have tried many things to get this to work but nothing has fixed the issue. I have also tried changing the query and nothing works. Changing the query and using the [Inventory] table in the DSum domain gives a different wrong quantity.
Here is the code: I reduced the code down to one column to be summed (StockQtyMade) just to see if I could get that working first. I will add the other two columns later. for testing purposes I am only looking at the StockQtyMade amounts.
Me.PullTotalQty.Value = DSum("[tblInventory subform].[Form].[StockQtyMade]", "[SumStockQuery]", "[tblInventory subform].[Form].[PartID]= " & Me.[ID])
Here is the SumStockQuery SQL:
SELECT Inventory.TransactionID, Inventory.PartID, Inventory.PrintNo, Inventory.StockRev, Inventory.StockQtySold, Inventory.StockQtyMade, Inventory.StockQtyShrink, Inventory.StockQtyXIncomplete, Inventory.StockLoc, Inventory.TransactionDescription
FROM Inventory
WHERE (((Inventory.TransactionDescription)<>"xNextOP"))
ORDER BY Inventory.TransactionID DESC;
Why the totals are incorrect??
View 3 Replies
View Related
Nov 9, 2014
I am trying to make a dsum for products coming in and coming out. find the example below
Products In
Apple 10
Mango 5
Products out
Apple 5
Now I want to show statement for sum as follows
Product. In. Out. Net in hand
Apple. 10. 5. 5
Mango. 5. 0. 5
But it is showing only
Product. In. Out. Net in hand
Apple. 10. 5. 5
what I understand is dsum cannot find the out field for mango as there is no field found for mango
View 14 Replies
View Related
Feb 22, 2014
I currently have a button with a checkbox on top (z-axis wise). This works exactly like I want, except that whenever the button is clicked or focused, it gets brought to the top and hides the checkbox. The only idea I've been able to come up with is maybe making the button completely transparent, with an image of a button behind it.
View 1 Replies
View Related
Mar 20, 2015
But in my access database I have a SQL code in which excel sheet opens automatically with required data. Now problem is one column in the excel sheet since this morning is showing up in Chinese instead of English. I don't know what to do.
View 1 Replies
View Related
Mar 24, 2015
I have recently split my DB and distributed the front ends to respective users. I dont know why for this particular user, the property sheet does not show up even though the the Property sheet button is clicked on the Ribbon bar. For others it seems all fine. This user runs on 2 monitors , but that should not be a problem I guess?
I am currently running 2010 version , and i have tried doing run>msaccess/safe which does not work.
How the user can customize reports or queries , or I can modify designs if I want to on his front end...
View 3 Replies
View Related
May 5, 2013
I have created 2 tables:
StaffID
StaffTrainingID
Table 1 (StaffID) - contains all personal details in the form of forename + surname + position + email + contact numbers ect. Each field/person has an autonumber.
Table 2 (StaffTrainingID) - contains all mandatory training/lectures (18 fields in total). I don't wish to list each staff member again in table 2 so have put a StaffID field in (data type is number).
However, when I try to type in the StaffID number in that field so I can link that person to the relevant training he/she has taken, Access won't allow it.
View 4 Replies
View Related
Aug 18, 2015
I have created a multiple field search screen. The script is attached.
I would like to add a MSG Box "No records found" when the user types in information in any field where no records are available.
Just cannot get this working.
View 10 Replies
View Related
Mar 26, 2013
Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
View 5 Replies
View Related
Apr 14, 2015
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
View 9 Replies
View Related
Aug 27, 2014
On the form: User enters first name, then last name. Upon updating the last name field, I would like another form to pop-up and display all the people with that same first name and last name that the user just entered.
On the pop-up form: All of the matching first names/last names are listed with a button control beside each record that says 'Select'. The user clicks the select button beside the record he/she wants. This pop-up form closes and all of the data from this selected record is now showing on the original form.
So far, I have a query/form that pops up only showing the matching first/last names. I'm having a hard time getting my original form to auto-populate with that record that the user selects on the pop-up.
(Also my main form is actually a sub-sub form - so in my trials I could've been massacring my syntax trying to point to it.)
View 5 Replies
View Related
Aug 10, 2013
I am trying to create a user form with sub form using the form wizard. I have only 2 tables, Employee (main table) and Vacation (subform table). I pick the fields from Employee Table then fields fro Vacation, but the wizard treat the Vacation as main form and Employee as sub form.
View 4 Replies
View Related
