I have a form with 2 combos (cboStart and cboEnd) and button to preview a report.
The report is made from a Query, with the following in the completion date:-
Between [Forms]![frmReporting]![cboStart] And [Forms]![frmReporting]![cboEnd]
The user then chooses the start date and end dates in the combo's.
What I would like to do is have a message box appear if the use forgets to enter either date.
i have a form which has as button that opens a query how can i make it so that if there arent any results from the query then a error message will pop up saying "no results found" and the table dosent show?
I have a form in my db and i would like it to show me a warning message if a specific field in a record is empty or even better not to allow me to close the form. I would like to have this in order to avoid incomplete data.
Hey guys......simple problem I have a form with 3 combo boxes.
The 1st combo, called winecode, gets the values from the following sql: SELECT [winecode] FROM wine WHERE winedesable=0; it works.....
The second combo box, called suppname, gets the values from another select, but depending on the previous combo: SELECT DISTINCT [supplier].[suppname] FROM supplier, suppwine WHERE [supplier].[suppnumber]=[suppwine].[suppnumber] And [suppwine].[winecode]=[Forms]![addpop]![winecode]; it works......
The 3 rd combo, called winesubcat, gets the values from a query which takes the selected value from the previous 2 combos. The query works by it self . However, i added the query in the data tab and open the form. then i selected values from the first 2 combos and there is no value in the 3rd combo...... any idea??
When I click a button I have code (below) that checks to see if my Combo boxes are NULL (empty), and if they are it’ll prompt the user to “fill in all fields”. Right now it includes all of the combo boxes on my form. Although, I want it to only include 3 combo boxes (I have 5 on my form). How could I do this, lets say if my combo box names are cbo1, cbo2, cbo3 ?
For Each ctl In Me.Controls Select Case ctl.ControlType Case acComboBox If ctl.Value & "" = "" Then MsgBox "You must fill in all data fields." Exit Sub End If End Select Next
Does anybody know how to add an option that says 'none' or 'no selection' or something to a list of combo options.
I use a query by form to produce a report. But I may close that report and it goes back to the form. If I want to re-run a new query I have to close the form and re-opne it so the combos are empty.
Is there anyway to have a 'none' option to empty the combo box?
I have a form, form1. Inside there is a combo box, cbo1, that gets its values from table1.On form load, I want an expression that checks if table1 has any values to "send" to cbo1. If yes, meaning, if after form loads cbo1 is loaded with table1's values, I want cbo1 colored RED, if not, colored WHITE.
Since the last Windows XP update on the secretary PC, all combo lists are now empty even if the related tables are not at all.
Here is her configuration: Windows XP SP 2 Access 2003 SP 3
Here is the description:
1) I've got a combo list based on the table Towns with zip-code, name, country.
2) In the form, in addition the combolist is sorted on the name, just to easily pick up the right Town
3) Since the Windows update, the combo list displays only the zip-code, the other fields are empty even if the table content is not empty at all; I mean I checked in the table content itself.
4) I created a query based on the same arguments of the combo list and the query is working well alone; if I try to create a new combo list linked to the query, then I get the same weird result
5) I've tried to create a new field with the combo list assistant; when I select the table Towns, it shows me the full content (so name, zip, country) and when I run the form, the combo list is again almost empty !!
6) What is more weird is that when I put the Access database back on my standalone laptop which is running Access 2002, the combo list is working correctly !! In fact I am currently maintaining the Access database from my Access 2002 since more than one year and I had no issue
7) In fact, I got the same issue with all the combo-list in my Database
8) I tried to compact the DB but with no effect
Somebody has a brillant idea for me ?? otherwise I think I will contact Mister Bill directly :)
I have a form called frmSearch with an option group called grpSearch ,a combobox called comboNyaba and subform called subform_CasesSearch has a checkbox called CaseClosed
The combobox filter the subform based on option group choice and value in textbox called NyID ... it works fine except that if the combobox is empty it give me error the code in main form i put it on Load and on current
Code: Private Sub Form_Load() With Me.subform_CasesSearch.Form If Me.grpSearch.Value = 1 Then .Filter = "NyID = " & Me.ComboNyaba
I'm working on a table for work which will serve as a database of bins and the products currently in those bins, as follows:
ID Bin Amt Product 1 34 25 110001 2 33 15 200005 3 32 23 110003 etc.
Basically: employee A will use a form to update "Bin 34" (ID=1), with information (Amt, Product) until it is emptied by employee B and cleared using a separate form. No new records will be made or deleted, just the adjacent fields (Amt, Product) cleared and filled in and cleared again over and over.
What I'm trying to figure out is, when employee A clicks on the combo box on his/her form to select a Bin and enter information, how can I filter what is listed in the combo box to display only those bins which have no values under Amt & Product. The real-world risk of overwriting a bins fields before it has been cleared by employee B (who physically empties the bin) can be extremely high monetarily so I am trying to reduce that risk by eliminating it from the combo box until employee B has cleared those fields.
I have a ComboBox [cmb111] that contains a '+' & a '-'. Next to this I have a text box that contains a $ amount. The operatives are required to press the combo box indicating if there is an Increase or Decrease and then type in the amount in the text box. After this has been done, the cursor moves onto the next combo box. If the operative forgets to press the '+' or '-' I need a Message Box to appear that will remind the operative to press this. I have tried the following code but it doesn't work. I tried to use Access help as a guideline but to no avail.
After Update function on the Textbox:
If Me.cmb111 Is Null Then MsgBox(Select Increase or Decrease[, vbOKOnly] [, Selection Required] [, helpfile, context])
This is as far as I can get and then I'm stuck. Could somebody please help me out with this? Thank you very much for your help.
Hello World:I have two tables, one called Assets and the other table called Job Sites. the Assets table has several fieldsAssetID - autonumberplus othersthe Job Sites table has two fieldsJobSiteID - autonumberJobSite - text (with about 22 names in it)the I add the JobSite to the Assets table (hiding the JobSiteID) it shows me the expected drop down box but it is BLANK. If I click on any of the BLANK spaces in the drop down, it populates the field. It is behaving as if the font color was white.Any ideas??? I am baffled. :confused: :confused:
I have just created a query so that I may base my report on it. The query ties together 4 tables. I only included the fields that will be in my report. I created the report using the wizard and used my new query as the source but it does not want to work. I tried opening the query and it was empty even though I have entries in the database.
I'm trying something quite simple, adding dates into a table with the aid of an action SQL statement (INsert Into) in VBA.
However, if a date is empty, the value 12:00:00 AM is filled in! I really want that if it a date is set to empty, that noting is added to the table... I can use an if statement though, to fix it, but why does it fill in 12:00:00 AM if a date is empty?? Can you fix it? Or is there no other way?
I have a query that appends records to a table with a constant numer of fields. so sometimes I have fields with no data. is there any way to create query which selects only fields with data.
I am trying to make a query with two tables. Each row consist of a student ID, their name and all their personal information. Both tables are exactly the same. But one table is a link table. That link table gets update every so often from an outside program and the other table is not linked. I want to be able to run a query that updates certain fields called "address changes". I have figured out how to find the updates, but I am having a problem with a field that is blank. If I have a field in the non-linked table that is empty but there is information in the linked table, it does not see it. Is there a way to get around this empty field problem?
I have been going back in a db to the beginning of time and restructuring...I have a field sales person if its null I need to assign a value of 100 to another field representativeid, I have been using the update query to accomplish the update until now. I've tried is null and "" to get this query to update, any idea?
I have an Input form that does not clear the fields after I hit the Save button. Data Entry is set to YES. If I use the navigation bar, there is no problem, but I would like to have the fields empty after hitting the Save Button, so that the navigation bar can be removed. What is wrong?
Hi guys, here is my new problem.I have a form which conatins a subform that shows info from a query.I created a query which shows records from table history when the field comment is like *code 1.the criteria in the query, in the comment field is: [forms]![edititem]![vconcate]In the edititem form i have a hidden field called vconcate which receives the value as follows:me.vconcate= "*code " & me.winecode (me.winecode is integer)after assigning the value to vconcate i display the vconcate value and shows*code 1, as it should be. However, the subform doesnt displays any record.I also tryed to insert the query in the editform, but nothing.if i run the query from the query window, and fill the value as *code 1, it works.here is more info:when the edititem is open, the user has to select a wine code from a combo box. After this selection the values are assigned to me.winecode and the me.vconcate. Because when i open the form edititem these codes are null or empty the subform is empty. Is there any way to refresh the subform via code?any suggestion?
In a previous post someone mentioned a difference between Null and Empty. Is Null is not pulling the nulls but I know those fields are empty. Can someone tell me how to pull in these empty fields. for my calculation I need to get Companies that showed revenue after and didn't show revenue once their contract started.
Code:DoCmd.RunSQL "SELECT tblTrades.tradeID, tblTrades.TradeConfirm, tblTrades.Laurent FROM tblTrades WHERE (((tblTrades.TradeConfirm)=No) AND ((tblTrades.Laurent)=Yes));"
I can seem to find a way to test if the SQL for my record set returns value. I've tried using the if statement with .BOF and .EOF. When there are no records returned for the criteria, there should be a way to test it with IF. I can't seem to figure it out. Using the record count does not work because it also returns at least one record. Help.
Here is the code
Dim rsContacts As ADODB.Recordset
Set rsContacts = New ADODB.Recordset
SQLStr = "SELECT FormatPercent(((43200-Sum(DateDiff('n',[tblOutageDetail.StartTime],[tblOutageDetail.endtime])))/43200),2) AS ElapsedTime FROM (qryOutageTotalMin INNER JOIN tblOutageData ON qryOutageTotalMin.Outage = tblOutageData.Outage) INNER JOIN tblOutageDetail ON tblOutageData.Outage = tblOutageDetail.Outage WHERE (((tblOutageData.System)='PARK PRIMARY') AND ((tblOutageDetail.StartTime)>=Date()-30) AND ((tblOutageDetail.OtgCat)=1))"
I am trying to make a query with two tables. Each row consist of a student ID, their name and all their personal information. Both tables are exactly the same. But one table is a link table. That link table gets update every so often from an outside program and the other table is not linked. I want to be able to run a query that updates certain fields called "address changes". I have figured out how to find the updates, but I am having a problem with a field that is blank. If I have a field in the non-linked table that is empty but there is information in the linked table, it does not see it. Is there a way to get around this empty field problem?
