I have created a message box that will appear if certain criteria is met, but I want to enhance the message box so that the following is achived:
"Please choose which OCA you are on 1, 2, 3, 4, 5 or 6"
The user then presses the appropriate key on the keyboard and that number appears in Me.Text1
Thank You!
Hi
Is it possible to set events for the buttons on a message box?
For example if I create a Message Box when someone clicks on a button, and set it to vbYesNo, can I then create an open form event on the yes button, and a close acform event on the no button.
Thanks
I have been tasked with building an Access MDB Database for absolute beginners and i need to guide them as fool proof as possible through the database
My Question is
I need to write a Macro or VBA and I need to warn the user if they are trying to move to the 1st record or the last record in the database
I would like to give it my own message box stating that is not possible to go further
Is this possible using a Macro or using VBA
I am having some problems, I tryed a msgbox with only ok and if I would like to save the record I see now needs to be a yes/no buttons, so I changed the ok to yes/no and it saves the changes no matter what. so i will need a If statement correct, but what do I put in it?? The Same thing is happending with my ok/cancel buttons.
Thanks
Is there a way to make the ESC key have the same results as the "No" button in message boxes?
View 2 Replies View RelatedI want to close a form and I am using
Private Sub Form_Close()
Application.Quit
End Sub
as the form opens with the access application window hidden, and I found that the .ldb file didn't close if I simply used the X.
I have a series of fields with validation rules which activate on exit. One of these validation rules is in the box which gets focus when the form opens. This means that I get the validation text error message boxes when I close the form with the X.
If I have started to complete the form, I get a whole host of error messages and validation messages when I try to shut it with the X.
Is there a way of closing the form and cancelling or ignoring all error message boxes. I want the user to be able to close the form if they have decided not to fill it in after all, or have got part way through and want to cancel.
I would really appreciate any help, I am sure this is a very basic question and I should probably be able to find the answer, but I can't and I am very fed up!
I have some code (see below) that checks if the start date text box is blank or greater than the end date, and if so, generates a message box and sets the focus back to the start date textbox. There are command buttons on the form that open queries based on the date fields. This all works fine.
However, if the user changes his mind and closes the form without filling in the date field, the message box "Please enter a start date" pops up repeatedly. How do I specify that a text box is required UNLESS the user is closing the form?
Code:
Private Sub txt_startdate_LostFocus()
If ((IsNull(txt_startdate) Or (txt_startdate) = " ")) Then
MsgBox "Please enter a start date.", vbOKOnly
[Code].....
Every time I re-open Access 2010 it pops up stating the following with a blank text box:
"[Forms]![Frm_system]![sub_frm_invoices].[form]![invoice_id"
I hit ok and the usual invoice_id param text box message box appears again.
Once that is over, I gain access. I can browse to the form - frm_system, open the sub-form sub_frm_invoices and remove the invoice_id field. Once I re-add it everything works fine (until I close the application).
I initially thought it was because the database was set to "compact on close" but I disabled that and it is still occuring .
I know this is the cause but as the sub-form itself uses a table record-source I know the field exists - not to mention I can simply delete and re-add it to fix it temporarily.
This behavior occurs when a field, a criteria, an expression, or a control in a query, a form, or a report references a name that Access cannot find. For example, a name could be misspelled or a field may not be available within that scope.
Basically it looks like the textbox displaying the invoice_id on the form is the problem. I can't figure out why though. When I remove it everything works - the queries work if I recreate it as well..
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies View RelatedI'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View Relatedthere is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Thanks,
Lester
Another quick request:
What would the code be for a button which clears the contents of a text box or a combo box on a form?
Many thanks,
Paul.
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
Hi guys, I have a related databes with about 20 tables.
My main table stores the data linking with most of the other tables. This main table stores football match records with player line ups. Initially I had a problem linking the 11 player fields in the main table to the player table, Icould only do it with 1, so someone at work suggested to link it using the lookup function. This worked brilliantly. However, now I am designing a GUI with forms but the forms have combo boxes where the lookup function was used and when i change these to text boxes, the players names are replaced with their ID numbers.
Is there any way of creating the form without the unsightly combo boxes, as they won't be needed, the GUI will be read-only. I look forward to your help!!
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI have a table that has client names and addresses. I have designed a form to be able to invoice these clients and everything is fine however what I'd like to do is have the address of the client appear automatically.
I have set the client names in a combo box and would like their address to appear in either a text box or sunken label automatically from the table. Is this possible and how do I do it.
Please keep in mind that I've done basic programming so please be kind to this newbie :D
Hi everyone,
I have been making progress with customizing a
MS Access program, but one major problem is that
I have been trying to make a List Box or Combo Box
that I can use to enter data in the TABLE, but I
find that I get a pull-down list that has the list of
values from only the parameter that is primary key.
More specifically, the program is set up as follows:
I have two tables in this program: One that is called
"invoices" and one that is called "items". In both of
these tables, there is one common parameter, which
is "Item Number". Item number is the primary key,
and I used the "relationships" function to tie this
parameter to itself between the two tables.
I was successful in setting up a list-box for the
"Item Number", but when I try to set up a list-box
for another parameter that is supposed to display
a person's initials, the pull-down list displays the list
of item numbers instead of the list of people's initials.
In fact, I don't know if there is an extra step I need to
take so that the database stores a list of people's initials.
Instead, I just fill in the initials in the field for each
record for which the "Item Number" is the primary key.
How can I get the list-box to pull down a selection of
different people's initials, or in other words how can I get
all the people's initials to be stored so that the list of
initials can be looked up. Just so you know, I have tried
different choices of entries in the "Lookup" tab in the
Design mode of Tables, including Display Control,
Row Source Type, Row Source, and Bound Column,
but the outcome is that the only parameter that I
get get in the pull-down list is the primary key, which
is Item Number.
I appreciate any help you can offer in explaining how
to correct this.
On a separate note, one of the parameters is "Date", and
on the reports, I'm trying to figure out how to filter a
specific date range so that I can limit each report to a
specific month. Please advise me on this procedure as well.
Thanks.
Any idea how to prevent the 'Unsafe Expressions' error message from displaying everytime Access '03 opens? (see attachment)
Thanks,
Hi All,
I have a form with a comboBox to select "employees".
I am using the combo.dropdown command to display 8-rows of employees.
I also use the Not_In_List procedure to check for NEW employees, and if not in the list , then the msgBox appears asking "Do you want to add this employee?"
The problems is the MsgBox is behind the dropdown menu of listed employees. Is there a way I can bring the MsgBox to display on top of everything, something like "acDialog", close the drop.down?
Thanks for your help....Enivia
Hello,
I use a command button to post an invoice amount. I would like to prevent accidental overwriting of a current invoice amount. This code overwrites the amount even after clicking “No”. I would like the cancel the action when “No’ is clicked. Please help!
Private Sub PostInvoice_Click()
On Error GoTo Err_PostInvoice_Click
If IsNull(InvoiceBalance) Then
[InvoiceTotal] = Me.InvoiceTotal1
[InvoiceBalance] = Me.InvoiceTotal1
[DueDate] = Me.InvoiceDate + 30
Else
MsgBox "You are about to overwrite the current invoice balance"
MsgBox "Are you sure you want to overwrite the current invoice amount", vbYesNo
If vbYes Then
[InvoiceTotal] = Me.InvoiceTotal1
[InvoiceBalance] = Me.InvoiceTotal1
[DueDate] = Me.InvoiceDate + 30
Else
Exit Sub
End If
End If
Exit_PostInvoice_Click:
Exit Sub
Err_PostInvoice_Click:
MsgBox Err.Description
Resume Exit_PostInvoice_Click
End Sub
I have a Macro that I made to archive 4 different tables...using append queries and delete queries and attached the macro to a button on a form. I had to disable the warnings because there were just too many of them...i was wondering if there is a way to customize one warning (like: Are you sure you want to do this? YES NO) is there a way to do this and add it to my existing macro. I want to give the data enterer a chance to make sure they understand what is going on. I know i could create another form as a secondary confirmation screen and have done this for the time being but a pop up warning would look much more professional
thank you in advance
I would like to display a pop-up message on a form when a specific field has been changed. I know how to add teh pop up message for that section; however, I would like the pop-up message to display data from a sql statement. Here is the sql:
select PurchSpecialHandling FROM InventoryMaster1 WHERE Part=(input from form)
I need to know what to place for the input from form, how to assign a variable to the result, and display the data. Thanks!