I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
Error: Compile error: Method or data member not found when create Update button
View 7 Replies View RelatedI have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
Compile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Do you guys know why I got this error?
Thanks
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
i recieved error on the following connection string in the combo box change event code as follows,
Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String
[Code]....
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
i have these code to auto generate member number but the highlighted line generate error 94 - invalid use of NULL:
Private Sub cmdGetNumb_Click()
'On click of button a new Member Number is generated and
'focus is moved to tFName field.
Me![nMembNum] = NewMembNum()
Me![tFName].SetFocus
'Prevent accidental click
Me![cmdGetNumb].Enabled = False
[Code] ....
I ran into this error message with the SendObject method. I'm getting the email address from the "username" environment variable. Our company generally uses the logon ID as the first part of everyone's email address, but there are some users that get this error: "Unknown message recipient; the message was not sent" Not only that, if two sendobjects are used one after the other, sometimes it sends to the first person and then the second one is set up to send a copy back to the sending user, it doesn't recognize the recipient that's logged on and is actually trying to send the email. That's the one that comes from the environment variable. But I've tried hard-coding the recipient and bypassing the variable altogether and it still generates the same error.
View 4 Replies View RelatedHi!
I'm in the midst of a database where a subform 'producttotal' textbox 'txttotal' would be automatically filled with a value from the mainform combobox 'product'. my code is
Private Sub Level_AfterUpdate()
Forms!sbfproducttotal![txttotal] = Me![product].Column(1)
End Sub
However, on testing it, I get a runtime error 2450. MS Access can't find the 'sbfproducttotal' referred to.
Do you have any idea what the problem is? Any words of advice would be welcome. Thanks!
I was doing a compact and repair when I got this error message.
Now when I try to open my database all I get is this message:
"Module not found"
:eek:
Am I screwed or is there maybe possible silver bullet??
Thanks for any help
I have been using the below code for several months to export to excel. Lately I get a run-time error 53 - File not Found. I have not changed anything, so what could be causing this issue. The debugger stops on the line "FileCopy sTemplate, sOutput"
Public Function ExportRequest() As String
On Error GoTo err_Handler
Dim dbs As Database
Dim qdf As QueryDef
Dim frm As Form
' Set database variable to current database.
Set dbs = CurrentDb()
Set frm = Forms!AOSummaryReportForm
' Open QueryDef object.
Set qdf = dbs.QueryDefs("AOSummary")
' Set parameters for query based on values entered
' in AOSummaryReportForm.
qdf.Parameters(0) = Forms!AOSummaryReportForm!StartDate
qdf.Parameters(1) = Forms!AOSummaryReportForm!EndDate
' Excel object variables
Dim appExcel As Excel.Application
Dim wbk As Excel.Workbook
Dim wks As Excel.Worksheet
Dim sTemplate As String
Dim sTempFile As String
Dim sOutput As String
Dim rst As DAO.Recordset
Dim strSQL As String
Dim lRecords As Long
Dim iRow As Integer
Dim iCol As Integer
Dim iFld As Integer
Const cTabOne As Byte = 1
Const cStartRow As Byte = 2
Const cStartColumn As Byte = 1
DoCmd.Hourglass True
' set to break on all errors.....
I've created an application in Access 2010 with a back-end and user-level security via workgroup file. The application has 12 users, the back-end is on a network share, and everyone has the front-end installed locally. Everything has been working great until today, when I made a small change and installed it on users' machines. Suddenly, one and only one user is getting the File Not Found error (53) whenever he opens the database, and all form buttons produce the same result.
View 7 Replies View RelatedHi,
I have an MS Access application installed on a number of machines and it is running fine on all of them except one.
On one of the server when I am submitting a form to search the database I get the error message:
"Automation Error. Element not Found."
Same version of MS Access on all machines. We are thinking of reinstalling MS Access on the machine to see if this would resolve the problem but just want to check if anybody else has any other suggestions???
Has anyone come across this problem before?
Any ideas or suggestions about how I might resolve it would be appreciated.
Thanks
Hello all,
I try to delete a record and i get this error message "The search key was not found in any record". The key of the table is an autonumber but for some reason in these two records i want to delete has value = 0 .
Any suggestion how to delete these two records?
Thank you in advance!
I have a fairly complex database which contains a company table and a staff table along with approx 30 other smaller tables.
The staff records have a field called company which is linked in a one to many relationship to the CompanyId field in the Company table. This is an auto-number field and is up to 5467 currently.
I have enforced data integrity when this relationship was created. The users enter new staff members using a sub-form in the Company form.
A user created a new record for a company and while completing the task the text in all field went a bit crazy and appeared in symbols rather than text. The user shut down the database and restarted it.
Now when you open the company form the staff member appears with the correct company but does not appear anywhere else in the database with this company. The correct company id is 3416 but when I looked in the table the staff members record has an id of 36097146 or something similar. There are only 5467 companies in the company table. I tried to amend this figure and got and error which said "The search keys could not be found in any records".
I tried to delete the record and the same error appeared. When I clicked on the Help button of the error I got a message telling me that the error occurs when an ISAM seek operation fails.
Anybody know what is going on here and how I can delete this record or more importantly why this may have happened in the first place.
Somehow it doesn't take this variable msoFileDialogSaveAs. It tells me it's unknown.
Code:
Public Sub Command2_Click()
On Error GoTo MyError3
Dim filelocation As Variant
Dim g As Object
Set g = Application.FileDialog(msoFileDialogSaveAs)
[Code] .....
I have a form that has several sub forms and what I want is that if the user chooses Plan Name in the main form "No Fault" or 'Workers Comp". I want message to pop and go to the field in the subform to enter data but I keep on getting an error.
Private Sub Plan_Name_AfterUpdate()
If ([Plan Name] = "No Fault") Then
MsgBox "Enter additional information in No Fault form before continuing."
DoCmd.GoToControl ([NoFaultWCompsubForm]![Attorney Name])
End If
End Sub
It says the action or method requires a control name argument?
What am I missing?
How to by pass error 3021 No current record
I know I can put the code below just don't know where to put it.
If Err.Description = "No current record" Then Resume
I attached a pic of my code that is causing the error .. and its okay I just want to by pass the message box.