I had a fully working database that I decided to clean up by standardising naming formats etc. I have changed the tables names and changed all VBA links etc to the new table names.
This all appears to work fine. The database is still doing exactly what it should be doing. The only problem is whenever a record is updated I get the following error,
"The Microsoft Jet Database Engine cannot find the input table or query, "***". Make sure it exists and that its names is spelled correctly".
Where the missing table is the previously renamed table. All the updates etc work correct to the renamed table but I get this error whenever it is updated. I tried renaming the tables to their original names but then I got the same error for the new names.
Anyone got any ideas or will I have to rebuild the database.
Im new to asp and access and have been having this problem for serveral weeks.
Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:
Microsoft JET Database Engine error '80004005'
Unspecified error
/admin/submitlogin.asp, line 8
I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,
We have been having intermittent problems with an MS Access 2000 front-end application linked to a SQL Server 2000 database recently.
From the switchboard a user was sometimes getting "There was an error executing the previous command". When she shut the application and opened it again it works fine for a little while - then the error occurs again.
I removed the generic error handling code from the code for the Switchboard form and I got the error message: "The Microsoft Jet database engine cannot find the input table or query 'Switchboard items'. Make sure it exists and that its name is spelled correctly."
I have been searching this forum and the web to find out what the cause of this error message is but I cannot find anything to go on or to try that might help get rid of this problem.
Does anyone know why this error occurs? Any idea how to stop it of happening?
Any ideas or suggestions would be greatly appreciated.
i get this error the time i enter info into a registration page from where i am getting all the customers info
Microsoft JET Database Engine error '80004005'
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. in line 74 and my corresponding query is
Set Commrs2 = Server.CreateObject("ADODB.Command") Commrs2.ActiveConnection=strconnect line 74: Commrs2.CommandText = "INSERT into registration(username,fname, mname, lname, sex, address, city, state, country, pincode, phone, mobile ,email)VALUES('"&logid&"','"&fname&"','"&mname&"','"&lname&"','"&sex&"','"&add&"','"&city&"','"&state&"','"&country&"','"&pin&"','"&phone&"','"&mobile&"','"&email&"' )" Commrs2.Execute
Set Commrs3 = Server.CreateObject("ADODB.Command") Commrs3.ActiveConnection=strconnect line 79 : Commrs3.CommandText = "INSERT into userpass(username,password) VALUES('"&logid&"','"&pass&"'" Commrs3.Execute
also sometimes i get this on line 79 Microsoft JET Database Engine error '80040e14' Syntax error in INSERT INTO statement.
i did a google search and i found this article http://www.kbalertz.com/kb_884185.aspx but i was not able to find the security warning dialogue box anywhere
I am trying to make changes to a particular field in Access but whenever I try to do this, I get an error messsage saying that Microsoft Jet Database Engine Stopped the process because you and another user are attempting to change the same data at the same time.
There is no once accessing the database at this time and this error message appears only when I go to that specific field. I've also tried to delete the whole row but it wouldn't allow me to do that saying the program has been locked.
please help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
please help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
I have a recursive script that seems to timeout after a few dozen requests, the database is returning the typical "Microsoft JET Database Engineerror '80004005' " error ("Unspecified error").
The code is pretty straight forward, it is a function that calls itself to generate a tree structure for a site map. It works great the first few dozen times but seems to 'time out' and return the above error after a few dozen records (building the tree).
The code looks like this :
Function BuildContent(id,depth) ' open the children Set GetKids = Server.CreateObject("ADODB.Recordset") GetKids.ActiveConnection = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=d:usersXXXXhtmldb1.mdb" GetKids.Source = "SELECT ID,Name FROM category WHERE parent = " & id & "" GetKids.CursorType = 0 GetKids.CursorLocation = 2 GetKids.LockType = 1 GetKids.Open() GetKids_numRows = 0
if GetKids.EOF <> true then MyLinks = countlinks(id) MyCats = countkids(id) response.write "Number of Listings (" & GetKids("Name") & "): " & Mylinks & "<br>"
maxdepth = 1 BuildContent = "<ol>" while GetKids.EOF <> true
if MyCats > 0 then show = true if KidsCats > 0 then show = true if depth < maxdepth then show = false
if KidsLinks > 0 then show = true if MyLinks > 0 then show = true
if show = true then BuildContent = BuildContent & "<li><a href='" & GetKids("id") & "_e.asp'>" & GetKids("name") & "</a></li>" else BuildContent = BuildContent & "<li>" & GetKids("name") & "</li>" end if if depth < maxdepth then BuildContent = BuildContent & BuildContent(GetKids("id"),depth+1) GetKids.MoveNext wend GetKids.Close() Set GetKids = Nothing
BuildContent = BuildContent & "<br></ol>" end if End Function
there are a couple of support fuctions :
Function countkids(id) Set GetListing = Server.CreateObject("ADODB.Recordset") GetListing.ActiveConnection = MM_Connection_STRING GetListing.Source = "select * FROM category WHERE parent = " & id & "" GetListing.CursorType = 1 GetListing.CursorLocation = 2 GetListing.LockType = 1 GetListing.Open() GetListing_numRows = 0 countkids = GetListing.RecordCount GetListing.Close Set GetListing = Nothing End Function
Function countlinks(id) Set GetListing = Server.CreateObject("ADODB.Recordset") GetListing.ActiveConnection = MM_Connection_STRING GetListing.Source = "select * FROM records WHERE parent = " & id & "" GetListing.CursorType = 1 GetListing.CursorLocation = 2 GetListing.LockType = 1 GetListing.Open() GetListing_numRows = 0 countlinks = GetListing.RecordCount GetListing.Close Set GetListing = Nothing End Function
I think the DB is being called too often, too quickly but I have no way of slowing the script down. If that's the case, is there a way to slow the code execution to give the DB time to catch up?
Otherwise, is it a driver problem (Microsoft JET Database Engineerror '80004005' ) and would switching to a OBDC connection give me better results or should I be using a different db driver?
I'm getting this error Microsoft JET Database Engine error '80040e14'
Syntax error (missing operator) in query _expression '123 street'.
The field in DB is type text. But the data to be written in the field is; number followed by characters. In other words it is an address field on the form, trying to insert new record into DB.
here is 3 different data I entered into field:
1. 'just some text' - works fine 2. 'text and number 123 ' - works fine 3. '123 number and text' - does not work. and gives the above error. Anybody has any idea?
My department has customer database using microsoft access with the main table being a linked table to SQL-Server database down in IT department.
I've only been recently made aware that the staffs have been having problem when trying to change or delete old data. It keeps on bringing up the error message
The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time. which is hardly the case since each staff are assigned only one customer to work on.
While it is technically possible to have many people working on the same data, business wise, it is impossible to do that.
I still come up with the same error even when the IT department confirms that no one accessing the SQL-Server table and I was the only one logged in.
This leads me to believe that there is something in the code that somehow preventing the table being edited or deleted. The problem is the database is so huge and was designed by my predecessor so I do not have any knowledge of the complete working of the codes behind it.
If it's the problem with the code, can anyone tell me what sort of codes caused this? If not, can anyone tell me what happened?
Hi all, I got Win2000 and I just developed an intranet solution installed on my web server (IIS). The application worked nicely and there were not any problems. Few days ago I re - installed my OS and I installed the IIS and my intranet solution but there is an error and the application doens't operate correctly with the Access database. When it tries to retrieve data from the database the following error appears:
Microsoft JET Database Engine (0x80004005) Unspecified error
The line of the code which is indicated by the error is the following:
objConn.Open("Provider = Microsoft.Jet.OLEDB.4.0; Data Source = "&loc&"; Jet OLEDBatabase Password="&passwd)
I updated Microsoft JET and MDAC. I really don't know how to resolve this problem. Any help will be appreciated,
I attempted to add new queries, reports, and a form to a shared database. It bombed out and I found that a user was changing data in the tables at the same time.
Now I cannot access the database at all (front or backend) and receive the error message: “The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time”. (I have verified that no users are currently logged in.)
Access to the data is critical to my department and I’m scrambling to fix this. Can anyone assist me? Thanks!
I have tried to create an MDE database and receive the message "Microsoft Access was unable to create an MDE database" I deleted all unnecessary tables, queries, forms and reports and still receive this message.
My main experience is with MySQL and PHP so I'm kindof stumbling around in the dark here. Heres my story:
We recieved a new server and migrating from (Windows Server 2000, IIS 5.0, Access 2000) to (Windows Server 2003, IIS 6.0, Access 2003) has been nothing but problems.
I have setup IIS to work with ASP, I've also setup a system DSN. The access file was copied over from the previous server. We're running Access 2003 and now I can't seem to get this ASP script to work.
When I try to upload a file to the script I get this error:
Line: 42 Char: 7 Error: HELP!!! Error: [Microsoft][ODBC Microsoft Access Driver] Invalid SQL statement expected 'DELETE','INSERT','PROCEDURE','SELECT', OR 'UPDATE'. Code: 0 Url: (URL address blocked: See forum rules)
Its included in a file called FileRead.htm here is the part that refers to the error lines: Code: var TheFile, FileStrm;// Retrieved field namesvar M_ssn, M_inits, M_Lname, M_Fname, M_DSSN, M_ruc, M_paycode;var M_normamt, M_payamt, M_pgrp, M_poe, M_pltcd, Payrollnum, Payrolldate;// var Trash, FieldData, FieldNames;var TrashLineNum = 1;// Create the file Stream Object (ReadOnly)TheFile = new ActiveXObject("Scripting.FileSystemObject");FileStrm = TheFile.OpenTextFile(FName,1,false);// Setup the Database Connectionvar SQLCommand, TheRS, TheConnection, DSNString, Commands, MyDC;FieldNames = new Array("ssn","inits","lname","fname","dssn","ruc","cco", "payamt","normamt","notsureone","pgrp","poe", "pltcode","recstatus","paychgflg","paystatuscode", "payrollnum","payrolldate");// Connect the the DatabaseDataLib.ConToDB();MyDC = DataLib.GetDC();// Get Payroll NumberPString = prompt("Enter Payroll Number","025");Payrollnum = parseInt(PString,10);// Get Payroll DateDString = prompt("Enter Payroll Date","20000101");Payrolldate = DateLib.FromMil(DString);// Setup the Database Connectionvar NumRecs = 0;//MyTest = DataLib.GetRS("PaydayUpdate1");alert("About to cross into the CurExtract!!!");MyRS = DataLib.GetRS("SELECT * FROM CurExtract");
I set an alert after this line but it doesn't pop up.
ANY HELP WOULD BE VERY GREATLY APPRECIATED. I'll be checking this very frequently.
Okay - well, I have figured out how to edit the schema file but now I am getting a different error message when I try to do the export:
The Microsoft Jet Database engine could not find the object "Form888.txt". Make sure the object exists and that you spell its name and path name correctly.
I believe that it is spelled correctly and I have changed the path a few times to see if it was that and it's still not working. Can anyone help me with this please?
My 641 export works fine the other 2 do not. I get the above error messge.
Someone else set this up for me and I know very little about VB. I kinda just do like trial and error, you know?
Heres the code:
Private Sub cmdUpload_Click()
On Error GoTo Err_Upload_Click DoCmd.TransferText acExportDelim, ExportSpec, EDMISfile, txtUpload MsgBox txtUpload & " written." DoCmd.Close (acForm), "frmedmisupload" Exit Sub
Err_Upload_Click: MsgBox Err.Description
End Sub
Private Sub comEDMIS_AfterUpdate() On Error GoTo Err_EDMIS
I have created an Access 2000 database sometime ago now that is split and has mutiple users. Which has worked perfectly fine.
I have since made some design changes.
I now have *most* of my staff saying that (mainly on reports) when they try to perform an action the standard Microsoft warning box appears saying Microsoft has encountered a problem and needs to close do you wish to send a report to Microsoft.
I am at a loss to why this is happening.
My PC is OK, and one *faultly* PC I checked had the same driver and service pack of access??. We have just moved over to Access 2003. Is this the cause.
I need help with Microsoft Access 2003. I am receiving messages when I am saving in windows or closing in windows. the message is, "Microsoft Jet data base engine stopped the process because you and another user are attempting to change the same data at the same time.
Hi i am trying to select records from a database using the following syntax, before i put in the order by part it works no problem, can anyone see my problem? thanks
SQL = "Select * FROM MainTable WHERE Company LIKE '" & ("%") & request("Company") & ("%") &"' AND Device LIKE '" & ("%") & request("Part") & ("%") &"' AND Division LIKE '" & ("%") & request("Strategy") & ("%") &"' ORDER BY '" & ("%") & request("orderby") & ("%") &'" ASC" set RS = dbconn.execute(SQL)
This is my first post here so please forgive if it seems rather elementary.
Here's the deal, I am a web developer finishing up my senior year of college. I have a client that is using a Microsoft Access database on a web site and the site is built with ASP. I have never really used these two items together before and need to write some scripts to do simple database functions.
I have a lot of experience with PHP and MySQL databases and SQL query statements but I haven't figured out the syntax to go with Access and ASP.
Is there a good beginner's site that covers this? I have scoured the web and found nothing useful.
Also, the following line of code gives me the following error:
objConn.execute("UPDATE Sheet1 SET Salutation='Jose' WHERE Salutation='Mike'")
gives the error
" Microsoft JET Database Engine error '80004005'
Operation must use an updateable query.
/tester/tester.asp, line 22"
That is line 22. I am connected okay because I can do select statements. The table name and field name is correct as well but I don't know why I get this error.
hi everyone i just want to ask how to create a database microsoft access and connect it to my webpage...like for example a certain content in my web is downloads (music, videos etc.). then i want to add another music in my web..how can i do that in microsoft access hope u can help me guys...thanks!
Start with: frm_W-GraphSearch select from combo and ever this for date criteria: 12/1/06 to 12/13/06 Open report - There you will see one out of three graphs showing Go to Report Design mode and open the sql in one of the graphs and try to run it, there you see the error:
"The Mocrosoft Jet engine does not recognize 'Forms![W-GraphSearch].Text0' as a valid field name or expression."
I am trying to access a Microsoft Access database located on a server on my network from my web server. The folder containing the access database has been shared on the network with everyone having full access. I created a virtual directory on my web server pointing to the share on the other server and when I try to connect it says:
Microsoft JET Database Engine (0x80004005) The Microsoft Jet database engine cannot open the file '\server1databasejt_test.mdb'. It is already opened exclusively by another user, or you need permission to view its data.
I'm not too hot at creating a database in Access, so I was wondering if there was anyone out their prepared to help me construct one.
This database is designed to search for property from various locations and from various price ranges, you can also pick the type of property, the amount of bedrooms and have the result in descending or ascending order.
For location just use: Location 1, Location 2, Location 3, and Any Price Ranges use: 30,000, 50,000, 70,000, 90,000, and 110,000 Type of property please use: houses, flats, and bungalows Bedrooms use: 1, 2, 3, 4 or 5+
Fill in any data you wish, I think this needs to have a query setup?