Hello All,
I changed one of my queries to generate the period off a date in a field. The simple expression is:
Period: Month([Act Del])
It give me the number of the month...however now I am getting this error. I assume that the number of the month is not matching with the other data types....but I need to know who to fix it.
any ideas?
Thanks
I have built in code a long sql statement as follows:
SELECT Age, BirdType, Flock, House, [Lab#], Organ, Origin, SampleDate, SampleType, Site, Source, SourceGroup,
[VT#], ProfileID, APIName1, APIAmts1, APILevels1, FullVals1, Match1, APIName2, APIAmts2, APILevels2,
FullVals2, Match2, APIName3, APIAmts3, APILevels3, FullVals3, Match3, APIName4, APIAmts4, APILevels4,
FullVals4, Match4, APIName5, APIAmts5, APILevels5, FullVals5, Match5, APIName6, APIAmts6, APILevels6,
FullVals6, Match6, APIName7, APIAmts7, APILevels7, FullVals7, Match7, APIName8, APIAmts8, APILevels8,
[Code] ......
When I try to open a recordset based on this sql, it gives me the runtime error - which is odd since I don't have any criteria in the statement.
I think the problem may be that vba is somehow adding a line break between "fullvals" and "18", but I don't know why it would do so and it doesn't always (only if the string is long).
"Data type mismatch in criteria expression" Error 3464
I get this on the <DoCmd.OpenForm "frmWrittenStatements"> in my code.
How on earth are any criteria attached to this?
I am trying to filter a recordset with a variable q. The field in the table associated with the record set is of data type Date/time. I assigned data types String and Date to q but both cases generates the error message " Data type mismatched in expression".
View 10 Replies View RelatedHi everyone,
I'm trying to execute an update query by using the DoCmd.RunSQL. Here is my statement:
DoCmd.RunSQL "UPDATE T_Facturation SET TotalQuantiteDiesel = TotalQuantiteDiesel + " & Me.TxtQuantiteDiesel.Value & ", " & _
"TotalInst = TotalInst + " & Me.TxtInst.Value & ", TotalDemo = TotalDemo + " & Me.TxtDemo.Value & ", " & _
"TotalCoutDiesel = TotalCoutDiesel + " & Me.TxtCoutDiesel.Value & ", TotalLocationHQ = TotalLocationHQ + " & Me.TxtLocationHQ.Value & ", " & _
"TotalTempsHQ = TotalTempsHQ + " & Me.TxtTempHQ.Value & ", TotalLocation = TotalLocation + " & Me.TxtLocation.Value & ", " & _
"TotalTransfo = TotalTransfo + " & Me.TxtTransfo.Value & ", TotalAutreDep = TotalAutreDep + " & Me.TxtAutresDep.Value & ", " & _
"TotalCable = TotalCable + " & Me.TxtCable.Value & ", TotalElectricien = TotalElectricien + " & Me.TxtElectricien.Value & ", " & _
"TotalTempExt = TotalTempExt + " & Me.TxtTempsExt.Value & ", " & _
"TotalTransportGeneratrice = TotalTransportGeneratrice + " & Me.TxtTransportGeneratrice.Value & ", " & _
"TotalTransportTransfo = TotalTransportTransfo + " & Me.TxtTransportTransfo.Value & " WHERE NoAutoInstallation = '" & Me.TxtNoAutoInstallation.Value & "';"
My problem is that when I execute this code, I got the error:
Run-time error '3464': Data type mismatch in criteria expression.
I tried to change my query statement, but I cannot find my error. I'm using Access 2003. I'm really lost.
Can someone help me please!
Thanks a lot
order_id is an autonumber key field form table Orders_table. Is is also selected in the row.source for the form I am using.
ComboOrder_ID is a combo box that looks up the order_id from the table with a SELECT...
... So I think the two should be the same datatype!
When I set the order_id in the combo the event procedure runs I get the following debug error:-
Runtime error '3464':
Datatype mismatch in criteria expression
This is the code for the after event on that combobox:
[code]
Private Sub ComboOrder_ID_AfterUpdate()
' Find the record that matches the control.
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "orders_table.order_id = '" & Me![ComboOrder_ID] & "'"
If rs.NoMatch Then MsgBox "it's the <find> that is broken" Else Me.Bookmark = rs.Bookmark
End Sub
[end code]
Any help is much appreciated
Thx.
Kev.
Run into a bit of an issue with a combo box that has dates. When I click on a date I receive:
Run-time error '3464': 'Data type mismatch in criteria expression'
Am I receiving this because I have declared it a string when I should declare it something else?
My other question for whenever I get the first part fixed. Is there a way that instead of having all the possible dates to select from, that I could simply have three options available: Within a year, More than a year, and no date. (Once I click on one of those three options, I will filter records that have a date within the past year, over a year, or no date at all. How would I be able to achieve this?
I am currently creating a form which includes a command button to update a field in a table to show Today's Date, at the time of running a query I am still yet to write.
I have the following code for my Command Button, which is returning the Runtime Error 3464 (Data type mismatch in Criteria Expression):
Private Sub cmdAddTodaysDate_Click()
CurrentDb.Execute (" UPDATE tblMyTable SET TodaysDate = " & Date & " WHERE tblMyTable.ProductCode = " & Me.txtProductCode)
End Sub
The query above seems to be having issues matching the text from the 'txtProductCode' textbox to the table field 'ProductCode'.
On double click event in the listbox, code as below:
Code:
Private Sub ListBox_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmTransactions"
stLinkCriteria = "[BinNumber] =" & Me![ListBox]
DoCmd.OpenForm stDocName, , , stLinkCriteria
End Sub
When I double click any row then it show Run time error 3464.
I have Main Table with a count and I have a query from it. But when I looked at it, the data doesn't match. What may seems to be the problem? It is all Grouped By.
View 1 Replies View RelatedHi
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/tribute2.asp, line 168
The code relating to this is:
The error line it is talking about is:
Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay
emember ing.co.nzdb
emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
Hope this doesn't sound to confusing.
Hello all - One of my 3 users' computers keeps coming up with an error when I try to enter the following command in the "Validation Rule" field of the table design view:
>=#1/1/1998# And <=Date()
Some investigative work showed that it's erroring on this clause: "<=Date()". Any idea why it would error on her pc and not the other 2 pc's? Her pc is old, but we're all using Access 2002. The error says: "The function you entered can't be used in this expression." Any thoughts would be helpful. Thanks much.
Dan
hi
I'm writing a pretty simple application to search an Access db. The query is:
Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
Can anyone help?
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
I am trying to get my VBA module to find the ID of a Member Number from a table using a dlookup but I keep getting a data type mismatch error,
Code:
Dim Answer As String
Dim varX As Variant
Dim rst As Recordset
Dim strSQL As Integer
Dim stWhereStr As String
Set db = CurrentDb()
[Code] .....
In the table the ID field is an automatic number and the Member Number is a short text field.
I am creating a simple query in a farm audit database.
In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?
I have vba code that creates the following SQL:
SELECT SubscheduleID, EventID, WeekOrder, DayID, StartTime, EndTime, Priority, CanJoin, PatientTitle, PatientNickname, IncludesPatient, IncludesAftercare, Letter1
FROM [qryScheduleCombinedDetails]
WHERE (SubscheduleID = 1 AND IncludesPatient = -1 AND DuringAftercare <> "AC only" AND (WeekOrder = "All" OR WeekOrder = 3 OR (WeekOrder = 1 AND Letter1 = "XYZ")) AND DayID = 2 AND StartTime <= #8:00:00 AM# AND EndTime >= #8:30:00 AM#);
When I try to run it, I get a "data type mismatch" error. When I put the same code into a query, I get the same error. However, it will run if I delete either condition from within the (WeekOrder = 1 AND Letter1 = "XYZ") pairing. I can't figure why it can run with either of those, but not both together.
WeekOrder is defined as String. Letter1 is calculated as Cstr(Nz(IIf(Letter,"XYZ","ABC"))) within [qryScheduleCombinedDetails], because I wanted to make sure that it would be recognized as a string.
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
Here's my Goal: To open a saved query that has a parameter, setting that parameter via a VBA sub.
Here's my Problem: I was getting various errors, but after debugging my program a bit, it comes down to a "Data Type Conversion Error"
Here's my Code:
Set db = CurrentDb
Set qd = db.QueryDefs("qryMY_DATA")
qd.Parameters(0) = Me.txt_ReferenceID
Set rs = qd.OpenRecordset("qryMY_DATA", dbDynaset)
Code:
'*** Database Variables
Dim db As DAO.Database, rs As DAO.Recordset, gq As DAO.QueryDef, prm As DAO.Recordset
I've been all over the forums and tried several different approaches, all to no avail. The Query runs fine in the QDT, but kicks back an error when I try to run it from my sub.
I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));
I have spent so much time onthis already and i am sick of it :mad:
Attached is my db. Please help me out here.
I have a table with a field with names set to text data type and i want to change it to number data type but when i do it in design view the data get lost. I want to know if there is a way to convert the data in the field as number type and keep the data in the field.
View 7 Replies View RelatedHi,
I am trying to find entries in Table A, that do not have a corresponding entry in table B, based on mismatched dates. Both tables can have multiple entries for several fields in each table. The problem is that there are dates in Table A that do match dates in Table B. It appears as if the query is comparing data row by row, not by data field. The sql for the query is as follows:
SELECT AE1.CSUBJECTID AS Patient, UCase([AEEVENT]) AS [AE Term], AE1.ONSETDT AS [AE Onset Date], AE1.ONSETTM AS [AE Onset Time], MI1.MI_DATE AS [Date of MI], MI1.MI_TIME AS [Time of MI]
FROM AE1 INNER JOIN MI1 ON AE1.CSUBJECTID = MI1.CSUBJECTID IN '\tmcnjfp1projectsData ManagementACUITYNew DataAcuity Revised DumpsAcuity_Revised_Access.mdb'
WHERE (((UCase([AEEVENT])) Like "*CHEST PAIN*" Or (UCase([AEEVENT])) Like "*CP*") AND ((MI1.MI_DATE)<>([ONSETDT])))
ORDER BY AE1.CSUBJECTID
WITH OWNERACCESS OPTION;
The problem I am having is shown below:
PatientAE TermAE Onset DateAE Onset TimeDate of MITime of MI
64001067CHEST PAIN08-Dec-0423:1004-Dec-046:00
64001067CHEST PAIN07-Dec-043:0704-Dec-046:00
64001067CHEST PAIN08-Dec-0423:1014-Dec-0422:35
64001067CHEST PAIN07-Dec-043:0714-Dec-0422:35
64001067CHEST PAIN04-Dec-0422:4014-Dec-0422:35
As you can see there is an AE Onset Date of 04-Dec-04 and a Date of MI of 04-Dec-04. So, is the query going row by row (e.g. first row ---> 08-Dec-04 <> 04-Dec-04). Any help is greatly appreciated.
Bob
i am importing from excel and i have a column that has account numbers and at some point i have an account like this... 2C1C18100
on the import i get an error.
i set the field to memo, numner or text and still get the same error..
any suggestions?
thanks in advance
Hi I'm doing some work on an open source intranet for a friend and I've come unstuck with data types I guess.
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'str'
D:SITESEXTRANETCLIENTS../includes/connection_open.asp, line 104
I added a date field and now get this error.
The process is as follows:
add user - client-add.asp
client-add-processor.asp (& siteSQL.asp include)
the error occours on submiting the original form page
new feilds:
Code:<form method="post" action="client-add-processor.asp" name="strForm" id="strForm">..............edited...............<tr><td><b class="bolddark"><%=dictLanguage("HostingPeriod")%>:</b></td><td><input name="HostingPeriod" size="20" value="<%=Session("HostingPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','HostingPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr><tr><td><b class="bolddark"><%=dictLanguage("DomainPeriod")%>:</b></td><td><input name="DomainPeriod" size="20" value="<%=Session("DomainPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','DomainPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr>
To client-add-processor.asp
Code:sql = sql_UpdateClient( _session("Name"), _session("Rep"), _session("Client_Since"), _session("Standard_Rate"), _session("Address1"), _session("Address2"), _session("City_State_Zip"), _session("LiveSite_URL"), _session("DevSite_URL"), _session("Contact_Name"), _session("Contact_Phone"), _session("Contact_Email"), _session("Contact2_Name"), _session("Contact2_Phone"), _session("Contact2_Email"), _Active, _session("client_id"), _session("ClientFolder"), _session("HostingPeriod"), _session("DomainPeriod"), _session("Notes"), _session("WebFolder"))'response.write(sql)Call DoSQL(sql)%><!--#include file="../includes/main_page_open.asp"-->
includes/main_page_open.asp
Code:Function MediumDate(str) Dim aDay Dim aMonth Dim aYear aDay = Day(str) -line 104 'aMonth = Monthname(Month(str),TRUE) aMonth = Month(str) Select Case aMonthCase 1aMonth = "Jan"Case 2aMonth = "Feb"Case 3aMonth = "Mar"Case 4aMonth = "Apr"
SQL
Code:Function sql_InsertClient(Client_Name,Rep_ID,Active,Client_ Since,Standard_Rate,Address1,Address2, _City_State_Zip,LiveSite_URL,Devsite_URL,Contact_Na me,Contact_Phone,Contact_Email,Contact2_Name, _Contact2_Phone,Contact2_Email,HostingPeriod,Domain Period,Notes)dim sqlsql = "INSERT into tbl_clients (client_name,rep_id,active,client_since,standard_r ate,address1," & _"address2,city_state_zip,livesite_url,devsite_url,c ontact_name,contact_phone,contact_email,contact2_n ame," & _"contact2_phone,contact2_email,hostingperiod,domain period,notes) VALUES (" & _"'" & Client_Name & "'," & _Rep_id & "," & _Active & "," & _"" & DB_DATEDELIMITER & MediumDate(Client_Since) & DB_DATEDELIMITER & "," & _Standard_Rate & "," & _"'" & Address1 & "'," & _"'" & Address2 & "'," & _"'" & City_State_Zip & "'," & _"'" & LiveSite_URL & "'," & _"'" & DevSite_URL & "'," & _"'" & Contact_Name & "'," & _"'" & Contact_Phone & "'," & _"'" & Contact_Email & "'," & _"'" & Contact2_Name & "'," & _"'" & Contact2_Phone & "'," & _"'" & Contact2_Email & "'," & _"" & DB_DATEDELIMITER & MediumDate(HostingPeriod) & DB_DATEDELIMITER & "," & _"" & DB_DATEDELIMITER & MediumDate(DomainPeriod) & DB_DATEDELIMITER & "," & _"'" & Notes & "')"sql_InsertClient = sqlend Function
Thanks in advance for any pointers.
I don't understand why I'm getting this message.
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click:
If Err = 2046 Then 'The command or action Undo is not available now
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bSave_Click
End If
End Sub
Any and all assistance is appreciated.
Randy