I got this code to run correctly, which pulls records where they are not junk(can be seen at end of where condition), the only issue is that the "AND" does not turn blue. Is this a problem?
Code:
If Not IsNull(Me.txt_last_rec_id) Then
'DoCmd.SetWarnings = False
SQLText = "INSERT INTO tbl_batt_id " & _
"(record_num, bat_id, manufacture, date_code, barcode, status) " & _
"SELECT " & Me.record_num & ", bat_id , manufacture, Date_Code, barcode, Status " & _
"FROM tbl_batt_id " & _
"WHERE record_num = " & Me.txt_last_rec_id & " And [Status] <> 'Junk'"
How to make validation for this case when I will submit the data 001 and X01, the system will be cancel and show warning message : "Data Duplicate!".and of course with this happen, the user will be know what they will submit, it have been submit into table before by other user. if I will do make with one validation like noregister as checking data and use the DLookup, this is no problem.
--> check to see if two fields matches e.g (qty=qty_completed)
--> if all records in recordset meets the above condition then run update statement
I want to put this code inside Form_Close. The code that I'm using checks the two fields for the condition and runs the update statement if condition is met. Problem is this a continuous form and I want all records need to meet the condition before it execute update statement.
I am trying to write following code, I want Msg to pop, when all three condition are true, but it not working
'''Non Budgeted Projects need Explanation and Variance class"
If Me.ID.Value >= 90000 And and Me.Variance_Class = "" and Me.Comments_Explanation_Delta_____100K = "" Then
MsgBox "This project is Unbudgeted. Please Add 'Variance Class' and provide Explanation why this project is Unbudgeted project has been added.", vbExclamation, "Rules Checker..." CheckRules = False GoTo Exit_CheckRules
I am trying to append some data from an excel sheet. Following code used for same and successful. However, i need to put few condition while importing the data to the Access table. i.e;
while importing, need to check whrt "containerNo" which is importing already in the table under the particular voyage. If yes error msg should pop up warning that the particular container is already exists. If same container number is already exists in the same table under a different voyage, data should be imported without any error.
Code
Private Sub Command0_Click() Dim Filepath As String Filepath = "D:Xxxx bl_Impts_main.xlsx" If FileExist(Filepath) Then DoCmd.TransferSpreadsheet acImport, , "MainImportsfromxls", Filepath, True
i have a form to enter a new client if the client is existed then a message box appear and tell me that this client is existed and his number id is ## with two buttons yes and no.if i click yes i should go to a report that contains information about that user and this report take his data from a query
new client save code --------------------- Dim MSG As Integer Dim ExistentID As Long ExistentID = Nz(DLookup("P_ID", "tbl_Personal_Information", "Full_Name = Forms!frm_New_Person!F_N"), 0) If ExistentID > 0 Then
[code]....
when i click yes the report should open with the existent id but he open a input box to ente an id and his title is tbl_personal_information.PID it's the ID field that it's named P_ID in the query
My subform consists of a list of tasks that are waiting to be verified. in order to verify tasks, the user scrolls through the list of tasks and checks a checkbox (discrepancyverified) on each record they wish to verify. After the user has finished checking all the records they wish to verify, they click a verify button on the main form which should then go back through each record and update the verifieddate value of any that are checked to today.
This is what I have so far:
Code:
Private Sub Command19_Click() Dim db As DAO.Database Dim rs As DAO.Recordset Dim ctl As Control Dim varItem As Variant
I am pushing some data to Excel from an Access query. When the data is in Excel I reformat the sheet by changing the fonts, applying borders and cell formats - I have got all of this to work fine.
The one thing I am struggling with is applying conditional formats. I am pretty sure it is something to do with incorrectly referencing the applcation/sheet. An extract of what i think to be the key parts of the code are below.
.... Dim ApXL As Object Dim xlWBk As Object Dim xlWSh As Object ...
Set ApXL = CreateObject("Excel.Application") Set xlWBk = ApXL.Workbooks.Add ApXL.Visible = True
I am hoping some one can help me out with an SQL string I am having problems during to get working.
This is my code
Private Sub SearchRoleSeeking()
Dim db As DAO.Database Dim qdf As DAO.QueryDef Dim strSQL As String Dim strFilterSQL As String Dim txtBoxValue As String Set db = CurrentDb Set qdf = db.QueryDefs("qrySearch")
lstSearchResults = txtSearch1
If Me.txtSearch1.Value = "Temp" Then txtBoxValue = 1 End If If Me.txtSearch1.Value = "Perm" Then txtBoxValue = 2 End If If Me.txtSearch1.Value = "Temp or Perm" Then txtBoxValue = 3 End If strSQL = "SELECT tblPersonalInformation.[PersonalID],tblPersonalInformation.[Surname],tblPersonalInformation.[Forename],tblPersonalInformation.[DOB],tblPersonalInformation.[WantedRate],tblPersonalInformation.[WantedSalary],tblPersonalInformation.[Status],tblPersonalInformation.[RoleSeeking]" & _ "FROM tblPersonalInformation " & _ "WHERE tblPersonalInformation.RoleSeeking = ('txtboxvalue')"
let me try explain what I am trying to do. I have a form where personal information is entered into. It has an option group that allows 3 choices. I have made a form that I will use to search (the above code is from that.) What I am trying to do is if a person enters "Temp" into txtSearch1 then for the SQL statement to search "tblPersonalInformation.[RoleSeeking]" for the value 1. If a person enters "PERM then for the statement to use 2 as the value for txtSearch1 and so on.
Please don't criticize the naming, I've renamed to make the logic simpler to understand.
I am trying to run a query based on the value of a textbox. Right now if the text box is empty it shows all the records. This is what works: SELECT A.ID, B.Weight FROM A LEFT JOIN B ON A.ID = B.ID WHERE B.Weight Like IIf([forms]![Form]![txtBox] & ""="","*",[forms]![Form]![txtBox])
The problem is when tbl B is blank (and only when its blank), I also want to see all records where weight is null.
Some examples of what I've tried (I have tried variations of): B.Weight Like IIf([forms]![Form]![txtBox] & ""="","* Or Is Null",[forms]![Form]![txtBox]) B.Weight IIf([forms]![Form]![txtBox] & ""="","Is Null or Like *",[forms]![Form]![txtBox])
I am not worried about the False condition, the problem is that Null is not being returned from inside an IIF(). When I set the WHERE statement to: WHERE B.Weight Is Null, it works. But if I try IIf([forms]![Form]![txtBox] & ""="",Is Null,[forms]![Form]![txtBox]). It doesnt work (Whether I put it in quotes or not).
hi i was wondering if anyone can tell me a condition or a command in which a user will be able to enter only 6 digit number. like 123456. if he tries to enter 234 the database should not accept. is this possible also? any help would be great. Thanks
Please have a look at the following code (I am not good at VBA or SQL).
Me.[txtBox] = DLookup(“[SNum]”, “[Table1]”, “[RecID]) If Me.txtBox =>2 Then Condition if true Else Condition if false End If
I type a value in my [txtBox], a number. I want to evaluate if the typed value meets the condition or not. [SNum] is serially numbered and [RecID] is autonumber Primary Key. The above code is not working. How do I achieve this? Please help.
:o Please help... I am trying to get the following results. If the Qty is less than 99 bag 10 per, if the qty is between 100 and 999 bag 100 per and if the qty is greater than 999 bag 200 per.
i have a Yes/No checkbox to indicate whether a job has been done.. if it is done then i want it removed from the list.. so i think my query sql needs to be something like..
note..the bold bit is the bit i am questioning.
WHERE (((Booking_Main.Job_Date) Between Date() And 1+Date())) AND Booking_Confirm.Job_Done ="No"
i have created a search form. any word the user types it searches certain details in my enquiries. in my form i have a list box that displays the enquiries sent by my query.
i have placed a Job_Booked (Yes/No field) checkbox in my enquiry table. this is because if the job is booked then i no longer want the record to appear in the enquiry list im sending to the form. ive tried this code, but even when i tick the job booked button, the enquiry is being displayed.. why is this
SELECT zEnquiries.Enquiry_Date, zEnquiries.Job_Date, zEnquiries.Job_Day, zEnquiries.Job_Time, zEnquiries.Enq_Forname, zEnquiries.Enq_Surname, zEnquiries.Pickup_Add, zEnquiries.Pickup_Post, zEnquiries.Dest_Add, zEnquiries.Dest_Post, zEnquiries.Quote, zEnquiries.Car, zEnquiries.Passengers, zEnquiries.Luggage, zEnquiries.Notes, zEnquiries.Job_Booked, * FROM zEnquiries WHERE (((zEnquiries.Enq_Forname) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Enq_Surname) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Job_Date) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Enq_Phone) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Dest_Add) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Dest_Post) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Pickup_Add) Like '*' & Forms!Enquiry_Search!Search2 & '*')) Or (((zEnquiries.Pickup_Post) Like '*' & Forms!Enquiry_Search!Search2 & '*')) And zEnquiries.Job_Booked=False ORDER BY zEnquiries.Enquiry_Date DESC;
I can't get this expression in Query to work! Any suggestions?
Account Type: IIf([parent account name] like “*hosp*”,"Hosp",IIf([parent account name] like "*vet*”,"Vet",IIf([parent account name] like “*dds*”,"DENT”,IIf([parent account name] like "*dmd*”,"Dentist”,IIf([parent account name] like "*pharm*”,"Pharm”,0)))))
as you can see I am doing search and identify for a new field.
I get an error message "the expression you entered contains invalid syntax"
i have a form of Employee Info, where with navigation button i move to the next employee. i have put a Command button to Preview Report on Single Employee Info that i am reading currently. So i want to Filter the Report with Single Employee Name and records so im coding on click even of the command button (see below) and its giving me null report.
im using where condition to filter the report and assign to it a variable employee name from the form. Reminding that source codes of both Form and Report is the same
Hi everyone, i have a form for bookings. People book by entering (among other stuff), the date and the booking slot.
Basically, what i need to do is have it so that only certain booking slots can be chosen on differnt days... for example, the booking slot of "Eve Extension" can only be used when the date refers to a Friday or Saturday, any other days it would not be allowed.
Is there any fool proof way of doing this, keeping in mind i dont exactly know VBA at all....
What method(s) are available to detect when a user is at a new record? I really just want to change the .text property of a combo box when the user is creating a new record. If this sounds stupid, I can explain the specifics.
I'm trying to put in a Where Condition for an ApplyFilter action, but it only allows up to 255 characters, I need more. I have very little experience using code!I want this to be the Where Condition:
Code: [Program Name] Like "*" & [Forms]![Program List]![Text34] & "*" Or [Organization] Like "*" & [Forms]![Program List]![Text34] & "*" Or [Program Type] Like "*" & [Forms]![Program List]![Text34] & "*" Or [Main Office City] Like "*" & [Forms]![Program List]![Text34] & "*" Or [Main Office Province] Like "*" & [Forms]![Program List]![Text34] & "*"
How do I make this into the Where Condition? An full example would be nice.
how do i make 2nd combobox list based on 1st combobox list, mean if i choose A at 1st combobox, only A1-A5 option appear, and when i select B at 1st combobox, only B1-B8 appear to select at 2nd combobox..
