Modules & VBA :: Access 2010 Copy Data From One Field To Another In Form
Jul 1, 2013
I am using Access 2010.Most of the time a tenant pays his exact rent. When that happens, I currently type in the payment (taken form the Rent field) and date of payment (current date) into a form. The date should not change.
I would like to place a checkbox into the form. If checked, the rent would be entered into the payment field and payment date (current date) would be entered automatically. Otherwise, I would just enter in the payment and date manually.
I have an application in Access 2003. It uses VBA to open an Excel file. The file has one tab for charts and one for data. The program counts how many charts needs to be created, one per project. It then will place 4 charts per tab, creating as many chart tabs as necessary, keep one data tab. The program then writes the data and links the data to the corresponding chart. It will also write legends, and scale the charts. This all works fine under Access 2003/Excel 2003.The error I get is "Application-defined error or object defined error".The line that gives me the error is: Set chCopy = xlsheet.ChartObjects(idx).I am using the Multi-Chart option frmChartType = 1
Now I'm moving to the Office 2010 world. It is not working. Below is the code I run to do the magic. I guess something is happening in Excel 2010 that is different from 2003.I found when I comment out the error line, and other lines dependent on chCopy it creates the charts, but all the charts are pictures and not charts!!
Code: Public Sub GenerateChart() ' Generate an Excel chart Dim db As Database Dim rst As DAO.Recordset Dim xlapp As Object
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected Total Envelopes=sum(Envelopes) for date selected Total Documents=sum(Cases) for date selected Total Pages=sum(Pages) for date selected
I have a handheld that downloads a CSV file which I copy and paste into an Access database. I was using XP and moved to 2010, with xp this worked great. In 2010 some fields that text and/or numbers will only copy the numbers and the field that have text will just have a blank in access. Is there a fix for this?
how to make this two fields in my form to say Y or N if the field is Not Null. Like if the field is not null = Y Else = N for the two fields. I have a picture to show what i'm talking about.
Using Access 2010: I have a query with four fields: ORG_NAME, PERS_NAME_LAST, CountOfORG_NAME, and BdMbrCount. There are a couple hundred companies in the database with 1-7 people associated with each company. I need to number each person so that they have a number, 1-7 in the MemberCount field of my query.
I have my query connected to VBA code.
I have experimented with code that I have found on the forum, just to see if I could get something to work and I am getting “Undefined function ‘BdMbrCount’ in expression. I am trying to pass [ORG_NAME],[PERS_NAME_LAST] to my function and assign the value of BdMbrCount to a new field in my query, BdMbrCount.
Code: Function BdMbrNumber() Dim qdf As DAO.QueryDef Set qdf = CurrentDb.QueryDefs("YourBdMbrsRRecognizedQry") 'Set rst = CurrentDb.OpenRecordset("SELECT [ORG_Name],[PERS_NAME_LAST],[CountofORG_NAME], [BdMbrCount] FROM YourBdMbrsRRecognizedQry") Dim ORG_NAME As String
How can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
I have a table with more than a million records. I want to add a new column with date equals to e.g.3/14/2012 for all the records. I am using update query, but it is super slow (taking more than a hour)..is there any other way to do this?
In Access 2010 is it possible to have a tblKits with a column on it Reactions 8. Then on a form a field Used. When thee user inputs 2 into the Used field can the Reactions on in the tblKits be updated to 6 automatically?
Two Solutions to address moving an Access Memo field into Excel when string has > 255 characters. All my 'reports' use Excel VBA (Access Reports are not used). The Excel reports can have 40,000 records. Speed to create the report can be an issue.
Describing 2 Solutions below to address moving Access memo fields with > 255 characters into Excel.After running this code
Code: 720 ObjXL.DisplayAlerts = False ObjXL.Columns("X:X").Select ObjXL.Selection.NumberFormat = "@" ' set column to Text 730 ObjXL.Worksheets(intWorksheetNum).Cells(intRowPos, 1).CopyFromRecordset rsNutsAndBolts
The Comments column are limited to 255 characters. So, the CopyFromRecordset (recordsetvariable) creates the 255 character limitation.
The reason? The 255 character limit is because CopyFromRecordset sutomatically uses the Characters property of the Range object. The 255 limit would not be there if the Cell Value property is used to assign the string to that cell.
Dim sRx as String ' String Prescription sRx = "String with > 255 characters ... you fill in the rest ...." Cells(1, 1).Value = sRx ' Cell's Value property assignment can be very large
Solution 1:
The record set is still in memory. By using a loop, a cursor can start with record 1 (memo column) and assign that value to the Excel row / column using the .value as shown above. Basically, this moves one memo field at a time, record by record. e.g. Read First recordset in Access, copy to variable, assign value to Excel row/column Then move next on each Access and Excel.
Solution 2:
An Access Memo filed [RxNotes] can have up to 750 characters. Cut it apart into three new fields that end up out in the very right Excel columns AA, AB, AC.
Note1=Mid([RxNotes],1,250) Note2=Mid([RxNotes],251,250) Note3=Mid([RxNotes],501,250) Then using Excel Object - Concat the cells back cell by cell... X2=CONCATENATE(AA2,AB2,AC2))
Then delete the columns AA, AB, AC to hide the evidence..Neither solution is all that elequent. Read about this and by golly, it made a difference
ConcatComments = "'" & CommentString
Before using the CopyFromRecordset be sure to add a single quote in front of the large string.
Turns out the interface between Access and Excel look for this to prepare Excel immediately for the string to be a string, not something else. Some of my strings had weird print characters that kind of looked like Japenese characters. It seemed random, it always happened if the string was 255 or more characters (ramdonly, not always). The single quote doesn't show up in Excel, but got rid of all the noise.
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code: Private Sub CommandButton1_Click() ChooseFile End Sub Sub ChooseFile() Dim fd As FileDialog Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" . 3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn" 4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete" 5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
I have prepared a table in a database which includes a yes no box to one of the fields.
The idea of the yes/no field is that this is recording if the record is awarded. What i would like to achieve is that if the yes no box is checked "True" i would like to be able to copy some of the data from this table into a new table and that the form associated with this table opens up to enable the user to populate the remaining fields.
I believe i need to run this as an on click event procedure but cannot identify the code to enable the data to be copied accross to the other table.
I have built an Access 2010 split database on my computer and it functions as built. My next step was to copy it to the server at work and test it. I discovered the tables had to be re-linked and so did that. As I have read in the Access World Forums in order to function as a multi-user database a copy of the front end must be placed on the individual workstation with the back end residing on the server, however the hyperlinks in the back end will not function when the copy on the workstation is run. I simply get an unable to open "filename" error pop-up. I can run the server copy and everything functions as built. I know that the hyperlinks require all the files to be in the same folder (relative vs. absolute), but if the back end contains all the hyperlinks why does the location of the front end seem to affect the operation of the back end?
I have a form puling from one table and then a subform in that form pulling from another table.I have a field in the [FORM] called [GROSS REFUND] and a field in the [SUBFORM] also called [GROSS REFUND].I want the value of [FORM].[GROSS REFUND], if the value is not zero, to be copied into a new record on the [SUBFORM.[GROSS REFUND].
I would like to know if there is any code to view existing Powerpoint presentations in an Access 2010 form . I am creating a library and would like to set this up. I would need step by step info as I am a beginner. I have seen code for 2007 and tried it but it didn't work for me. I'm working with Access & Powerpoint 2010. I've seen VBA, Automation, etc. I do not want to build ppt presentations in access.
We have a recent issue on client PC. After application running for a while, all the sudden the calculated field on the form not showing the details, though there is data on the control. After restart the PC, the calculated field display correctly. We guess this may be due to the theme we use.
Is it possible to have a field (Color) on a form be set to a combo box. A drop-down box appears with Green, Red, Blue, Yellow, Other. When other is selected a dialog box prompt appears asking the user to enter the color. The response is then what appears in the Color field.
I have a main form that has some sub forms on it linked by master child on PK. When I select a new record on the sub forms I want to take a date value from the main form and populate the value into a field in the sub form. How do I do this as I cannot see a new record event on the sub form?
I have a form with two tables referenced. I am using the form only to update one of the tables. I am using the other table to pull a reference field. When I add my second table using the query builder, it makes it to where I can't edit/add in my form. I assume its because of the SQL insert statement, but I don't see this statement and can't find where it is to edit it. How to have the form only update one of the tables, while just using the second table as a reference for a field?
How to update data from one table to another table using form.
I have data coming from design team in Database 1 and using form i want search data and assign the job to a person and store it in the database with his name. I have to do this because database from design team is read only.
Here is what I am trying to do. I have a query with 2 fields. "Time In" & "Time Out". What I would like to happen is this. Whenever a character, let's say a "t", is entered into that field I would like the current time to populate that field. Right now we are actually typing in the time. I have the fields set up as DateTime fields currently.