Modules & VBA :: Add Text To Make Max Length In Field
Sep 26, 2014
I have 2 fields in a query which I want to write to a table. Eg ProductName (field length 10) and Product Code (field length 5) the fields need to be filled out so the length makes the maximum text
For example product name 'test' length is 4 i have to add 0 to make the length to 10 so the field will be 000000test same thing applies to Product code. I have 700 records like this, is there a way in VBA where it adds the extra text to make it the maximum length.
I am using MS Access 2007 and have a report which display the list of values (say 10 fields) from the basic SELECT * FROM table query.
I need to dynamically set the BOLD based on the particular value for the fifth field which was assigned from Query. if it doesn't match it should display normal.
E.g If Field_5 = "Agent" then Field_5.FontBold = True Else Field_5.FontBold = False End if
I tried the aforementioned code and it dont work. ALso i tried achieve it using below listed options.
I have a table with about 300,000 records. About ten fairly small fields per record. I am trying to change the length of a text field from 25 to 40 characters, and I get the error message, 'MS Access can't change the data type. There isn't enough disk space or memory'.
I have never seen this message before. I have about 64 Gig of free disk space. What can I do?
I have a table that stores ID,PolicyNumber,NewPolNo fields.It has millions of records. The field NewPolNo is empty. I need vba code that will check the following for each record:
1. If the length of the PolicyNumber is over 14 characters long then store that PolicyNumber value in NewPolNo field.
2. If the length of the PolicyNumber is less than 14 characters long thenagain store that PolicyNumber value in NewPolNo field.
3. But if the length of the policyNumber equals to 14 digits long then check the following:
a) If the last 7 digits are 0's of that PolicyNumber. If yes then store first 7 digits in NewPolNo field. b) If the last 7 digits are not 0's then store the whole PolicyNumber value in NewPolNo field.
We need to check these conditions for each record of the table.
I have a database that is used for tracking changes to numerous courses. Part of this database create a unique tracking number for each course problem developed. Currently I have the form do a comparison using the highest most number to compare against the current number assigned and prevent the form from saving until the number is incremented and not a duplicate, it would be a lot easier if I could just have it increment plus 1. I have seen various answers but they all seem to depend on the alpha portion of the field being a set value, in my instance it is variable in length. The only part that is fixed is the last four characters to the right which are the numeric portion I would like to increment. For example the field can equal:
QACP-M-PIQ-6059 QACP-M-PREF-6002
how to extract just the numeric portion, increment it by one and save?
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
I have a form with three text boxes and i am trying to figure out how to ensure atleast one of these boxes is required and would error if none of these are completed.
I need to remove html text from a make table in access 2007. My table name is "Bad Actors Comments Column" and the column where the html text resides is "FirstOfADD_TEXT. VBA code to remove the html text?
I can add to my make table query UDate: Date() that will add a populated field to the output table that has today's date in it.
I can also add something similar like this for example V_Num: [V_Number] and when ran, will prompt with a dialogue box to add some data, it will then create the table with that new field name and populated with the text from the dialogue box.
But how can I automate this to skip the dialogue box and just add it to the expression?
We have a button running a SQL query via VBA, how can I make it so the results doesn't show up in a table/preview?Also, I know it's for the SQL forum but how can I make a text box to show the results of a query to display it on screen?
is there a way to allows more that 255 chars in to a text field in a mdb? or do i have to do something like save it to a test file then link to the text file (cos i really dont know how to do that :P)
I've been developing the code below but when the length of .lstAnswers is longer than 128 it doesn't delete the question. Is there a reason under queries or SQL this should happen? I'm hoping that i'm just thick and there's an easy answer but nothing seems to work.
-------------------------------------------------------------------------- Private Sub cmdRemoveAnswer_Click() Dim Answers_SQL As String Answers_SQL = "DELETE tblOptions.* " & _ "FROM tblOptions " & _ "WHERE (((tblOptions.strAnswer)=[Forms]![frmQuestionWizard]![lstAnswers]) AND ((tblOptions.strQuestion)=[Forms]![frmQuestionWizard]![lstQuestion])) OR (((tblOptions.strAnswer) Is Null))" DoCmd.RunSQL Answers_SQL, 0 lstAnswers.Requery End Sub
I'm trying to apply a custom input mask to a text box control. The text box must contain a 43 character string, broken into sections as follows :
AAAA-AAAAA-AAAAA-AAAAAA-AAAAAAAAA-AAAAAAAAAAA-AAA
(The format is quite strict and always comprises alphanumeric characters , hence I figured an input mask would, if nothing else, support the user to key the string accurately from its constituent parts...)
However, when I try to apply the input mask to the text box, I seem to run out of characters - I get as far as the below but the input mask wizard won't let me extend the mask to the final 8 characters
AAAA-AAAAA-AAAAA-AAAAAA-AAAAAAAAA-AAAAAAAAAAA-AAA
Are input masks restricted to 35 characters in length? And if so, how else could I make this, admittedly complex, text input more manageable for end users?
I am having trouble importing text records into a simple Access 2002 database. I’d be grateful for any help; it would save me hours and hours of manual cut-and-paste from Word into Access!
The records I want to import are text passages which originate in Word. Within some records you might find more than one paragraph. I want that formatting preserved. I signify the end of a record with a “#” character.
I create an Access database consisting of two fields: a) one called "Item" for the text records, with the data type set to memo so it can handle long text passages, and b) one for the primary key ID, which when prompted I let Access create automatically.
Here’s what happens when I try to import the data to my “Item” field”. First, I cut and paste all my original text from Word into Notepad. Then in Access I go File / Get External Data, and then choose Import, and choose Text as the data type. In the ensuing wizard under the Advanced tab I choose the option for delimitation by a specified character, and make “#” that character, and I speciy that I want the data to go into the "Item" field as memo data type. I then finish the wizard.
Sometimes I get error messages that not all data imports successfully, due to key violations, and when I check, nothing has been imported. Other times I just get a message saying it didn't work out. It's never worked.
Here are the records I'm trying to import from Notepad:
I have a report that prints labels (similar to avery labels) which pulls data from a query. These labels are all unique and vary in length. Due to the length variance, I want the font size to get smaller for labels with more characters. I want the text to go down to another line when necessary.
In my report under the OnPage Event Procedure I wrote this:
Private Sub Report_Page() If Len(Text2) > 20 Then Text2.FontSize = 8 If Len(Text2) > 10 And Len(Text2) < 21 Then Text2.FontSize = 10 If Len(Text2) < 11 Then Text2.FontSize = 14 End Sub
This works to some degree but the problem is that once there is a longer label, all of the proceeding labels are resized & the longer label that should have been resized was not.
Is there another place I should be writing this code? I looked under events for the textbox but there doesn't seem to be anything that would work since none of them would trigger when printing labels
We need to move rich text from an Access memo field to a Word text box. So far the best Ive been able to come up with is in the code below. In this code pprs!What is a record set field of a table memo field that is bound to a text box enabled for rich text. The rich text seems to be stored as html as so I can get word to convert it by enclosing it in html tags.
Dim What As Word.Shape Set What = doc.Shapes.AddTextbox(msoTextOrientationHorizontal , doc.PageSetup.LeftMargin, 225, 534, 0) Dim sPath As String sPath = "G:Temp.html" Open sPath For Output As 1 Print #1, "<HTML>" & pprs!What & " </HTML>" Close #1 What.TextFrame.TextRange.InsertFile (sPath)
I'm looking for some advice on what the maximum field length is in Access. Which option will provide the maximum length. I am wanting the field to capture both numbers and text.
Any pointers in the right direction would be much appreciated.
If I read the documentation then memo field in a Access table can be 65.000 chars long. I have three memo fields in a linked ODBC table which is filled by a append query from SQL-server database. The text in these field is cut off by 255 chars. Does somebody know what the cause of this can be?
1. Is there a limitation/property where I can configure the length of Access memo field? DAO? I have read something about this but I don't understand this.
2. How can I trace that everything is send from the source? Maybe it's cut off at the source site. On this moment I don't know something about a Linked tabel. Is there a sniffer or trace tool so that I can see what kind of data is realy send?
I am using a table that stores data and one of the fields is just a text field with a maximum length of 10.
However, when I store the data in the field, if I only enter 5 letters in it, it stores the 5 letter word correctly but followed by some spaces (I assume 5 spaces but I may be wrong.
I cannot figure out why does anyone know why?
If not, then can I trim the field if I use it in a query/report?
I know zero about Access and am posting this for another organization. When exporting to cvs, one of the fields is not exporting the entire text. It's a text-only field with about 300 characters. Is there a limit? Seems they had had this problem in the past, but fixed it. Can't find the solution again. Help and thanks!
I have a column in my table, and its size is set to 10 characters. In a form, i have a combobox based on that column, which contains the values "Corrective", "Preventive", and "Supplier". both Corrective and Preventive are 10 characters, and fill up the field to its max, however, Supplier is only 8 characters. When I look back in the table data, there are two spaces after Supplier. Basically, I can use the arrow keys to "see" the two blank character spaces. Why is that? Are these extra blank spaces taking up space they shouldn't?
I am trying to change a field lenght of a large database (access 97) It is at 50 right now and want to change it to 25. When I try to change it and save the table I get a error when the bar is about 3/4 the way accross the bottom.
Microsoft can't change the data type - there isn't enough disk space or memory.
then
not enough space on temporary disk
This is error 3183. In the help it says that the TEMP DOS enviroment variable location doesn't have enough space. (summerising). Now I have a 100+gb drive that isn't close to being full. I also changed the MaxLocksPerFile registry dword to 8,000,000 as my table has around over 3 million records. I have tried this on a xp and 2000 machine same results. Next I am going to try it on a 98 machine. I could do it by breaking up the table into 2 differnt ones and do each one individually but there is an autonumber field used as a reference number (I know I know). So that would screw up the numbering scheem (Yes I know there are ways arund that also). this database is about 400MB
Couple of questions 1. Is there a way around this? I have not found a solution on line yet. 2. Will lowering the field length make the database smaller (the data that is in there now is less than 25 charecters and the field is set to 50.) I have gotten mixed info on this. there are a few fields I would like to reduce.