Modules & VBA :: Adding CC Recipient When Sending Email
Feb 7, 2014
I have been able to create code to send email for my ticket system but now have a need to add an additional recipient. I would prefer this recipient to be add in the CC field. This email address will come from its own table. I have tried to figure this out myself but I can't get anything to work for me . I am fairly new to VBA and all of my experience is just through trial and error (mostly error). I have attached my original code below ....
Private Sub cmdMailTicket_Click()
On Error GoTo Err_cmdMailTicket_Click
Dim stWhere As String '-- Criteria for DLookup
Dim varTo As Variant '-- Address for SendObject
Dim stText As String '-- E-mail text
[Code] ....
View Replies
ADVERTISEMENT
Dec 12, 2013
I have created a database that auto emails and works well, my problem now is that though there are multiple emails to send to it is only sending to the first one. The way I have set this up is I have created a qry to combine all emails using Allen Brownes concatrelated in below
Code:
SELECT DISTINCT Left([Copy Of tbl_Depot]![Depot],3) AS Port, ConcatRelated("[Copy Of tbl_Depot]![ContactEmail]","[Copy Of tbl_Depot]","[Copy Of tbl_Depot]![Port]=""" & Left([Copy Of tbl_Depot]![Depot],3) & """") AS Email
FROM [Copy Of tbl_Depot];
I then link this to an append qry which becomes my data source
Code:
INSERT INTO tbl_dptem ( [Empty Return Location], [Container], ContactEmail, DepotEmSent )
SELECT qry_emdepot1.[Empty Return Location], ConcatRelated("[qry_emdepot1]![Container No]+chr(13)+chr(10)","qry_emdepot1","[qry_emdepot1]![Empty Return Location]= """ & [qry_emdepot1]![Empty Return Location] & """") AS [Container], qry_Portem.Email, qry_emdepot1.DepotEmSent
FROM qry_Portem RIGHT JOIN qry_emdepot1 ON qry_Portem.Port = qry_emdepot1.[Empty Return Location]
GROUP BY qry_emdepot1.[Empty Return Location], qry_Portem.Email, qry_emdepot1.DepotEmSent;
Below is the code I use to auto send emails and when I check it shows all email addresses in sent email but it is only going to the first recipient.. not sure what I need to do so all of them get it.
Code:
Sub EmDepot()
Dim Notes As Object
Dim Maildb As Object
Dim MailDoc As Object
Dim objNotesDocument As Object
Dim objNotesField As Object
[code]...
View 4 Replies
View Related
Oct 31, 2013
I have the following code (which everyone uses) but I have a challenge.
I ONLY want to use two (maybe three) fields from the database! (Subject & Body... with the POTENTIAL of an attached document.
I want to fill in the "to" section AFTER the email is open. This will allow me to make changes if I need to before it is sent.
Here is the code I am trying to work with. (It should look familiar) but I can't get it to keep outlook open!
Code:
Private Sub SecondEmail_Click()
'open Outlook, attach zip folder or file, send e-mail
Dim appOutLook As Outlook.Application
Dim MailOutLook As Outlook.MailItem
[Code] .....
View 1 Replies
View Related
Jan 19, 2015
I am currently using vb code to send an email in Access on the click of a button. I want the database user to be able to enter the recipient in a text box [ToEmail] which is on form [GroupStockProfiler]. However, I'm unsure how to put this into my code. I currently have the following which doesn't work (unless I put a specific email after 'To'):
Private Sub Command414_Click()
Const cdoSendUsingPickup = 1
Const cdoSendUsingPort = 2
Const cdoAnonymous = 0
[code]...
View 1 Replies
View Related
Jan 12, 2015
I'm working on a database for work that email's the current record after the form is completed. I have a attachment field in the table called Photo and some record's have a photo attached and other's don't. The code below works great with records that have a photo attached, but I get a path not found if I try to email a record that does not have a photo. I know that I need to put some form of code to check the photo field for a attachment, but I'm having a brain fade as to just what the code is.
Code:
Private Sub eMail_Report_Click()
Dim oFilesys, oTxtStream As Object
Dim txtHTML As String
Dim appOutLook As Outlook.Application
Dim MailOutLook As Outlook.MailItem
[Code] ....
View 5 Replies
View Related
Dec 16, 2014
i am trying to send a email with a pdf-report attached based on a report (rap_factuur_klant_pdf).I am using MS Access 2007 and Outlook 2007..
Code:
Dim sAddr As String, sSubj As String, sFor As String
Again:
sAddr = InputBox("E-mail address:")
sSubj = "Report"
sFor = Left(sAddr, InStr(1, sAddr, "@") - 1)
DoCmd.SendObject acSendReport, rap_factuur_klant_pdf, acFormatPDF, sAddr, , , sSubj, "BLA BLA BLA"
DoEvents
View 5 Replies
View Related
Jun 25, 2013
I use a macro (SendObject), which works, but it requires Us, or someone to go into Outlook to click on send.I'm new to vba, do I have to code something on outlook to send automatically?
View 6 Replies
View Related
Nov 13, 2013
I have this code below in order to send query through outlook. How can I display the mail and not directly sending it?
Private Sub Command64_Click()
Dim message As String
Dim rs As Recordset
Dim vRecipientList As String
Dim vMsg As String
Dim vSubject As String
[Code] .....
View 5 Replies
View Related
Nov 26, 2013
I am a College Instructor and I would like to make a Database that will regularly email me a list of Students who are approaching the mid-point of their Program.Is it possible to program Access to email a list with Student Names, Registration Numbers, etc, etc. by a given date?
As of right now I have a Database with all of the students' pertinent information but I have to manually comb through the Database each week to see which students will require a Mid-Term interview that week.
View 7 Replies
View Related
Aug 16, 2014
I have this VBA code:
Option Compare Database
Option Explicit
Private Const URL_CDOCONFIG As String = ""
Public Function SendEmail(ByVal sTo As String, ByVal sFrom As String, _
Optional ByVal sCC As String = "", Optional ByVal sBCC As String = "", _
Optional ByVal sSubject As String = "", Optional ByVal sBody As String = "", _
[Code] ....
It is being called with the following macro:
SendEmail("gregory.west@dbwsys.mb.ca","vba@dbwsys. mb.ca","","","Subject line","Body of eMail here")
But I get this error message.
The "SendUsing" configuration value is invalid.
View 1 Replies
View Related
Mar 12, 2014
How would I set up an Outlook email using a list of recipients from an Access table? I'd like to be able to run this from Access 2007 and not Outlook. However, once the email is set up, I'd like to be able to go into the email and add subject, body, etc. before sending the email.
View 5 Replies
View Related
Aug 26, 2013
I am trying to send an email from a form in Access 2013 using fields on the form as part of the email body and I can't seem to find code to just do this.
I don't need to loop through tables as the send email address etc will be on the form together with appointment times etc ...
View 2 Replies
View Related
Apr 24, 2015
I have code that allows me to drag and drop an email to an access field, which then stores that email on the local / network folder. Another field with that email's file path is also displayed.
My big question is: knowing the email's file path, how can I have the system open those (network/folder) saved emails as a reply (not automatic send)?
I envision this as being triggered by a _Change event; if a drop-down changes or is selected, then the system reads the location in the 'Email Location' field, and opens the reply to that email.
View 3 Replies
View Related
Oct 1, 2013
I would like to update the following code I have been using to send emails, from Access 2010 via Outlook 2010, to include my signature block with hard returns in between each line and a few above the signature.
Lets say the signature would be:
My Name
My Company Name
My phone number
My Reference
I tried next to: stMessage = Me![EmailMessage] &"My Name" & Chr(10) & Chr(13) & "My Company Name"
etc.
It does not work..
Here is the coding :
Code:
Private Sub SendEmail_Click()
On Error GoTo ProcErr
Dim stLinkCriteria As String
[Code]....
View 5 Replies
View Related
Apr 16, 2014
Code:
Public Function OPEN_SESSION() As Boolean
Dim objSession As Object
Dim strServer As String
Dim strMailFile As String
[code]....
but for some reason my form is not updating after sending the email.
View 1 Replies
View Related
Aug 25, 2014
I would like to set a flag when a report gets emailed.
View 14 Replies
View Related
Jan 23, 2014
I am currently updating an Access database, any way to send an OLE Object (in this case an Excel Spreadsheet) as an attachment to an email address using VBA code? I made a form that shows the Excel Spreadsheet when the record is brought up, but I need to know how to send just the Excel Spreadsheet and not the other information on the form.
Also, if there is an alternate way to have an Excel spreadsheet embedded into an Access form, i'm open to change. The user wants to be able to see the Excel spreadsheet and send it to their supervisor without having to locate the Excel spreadsheet on the hard drive.
View 2 Replies
View Related
Dec 18, 2014
I'm trying to set email address for "Cc" using "Like" but showing error 13 Type mismatch. Problem only red mark code either all are working fine.
Code:
Private Sub cmdSendMail_Click()
On Error GoTo ErrorHandler
Dim strTo As String
Dim strSubject As String
Dim strMessageText As String
[code]....
View 14 Replies
View Related
Sep 4, 2013
I have a question about sending secure emails by VBA code in MS-Access. I have a Access application within you also can also send emails by VBA code using outlook. Everything works fine, but now the recipient wants to receive the mails with a digital signature by S/MIME.
I got a digital certificate from the recipient as a pfx-file.
Is this possible in Access using outlook ?
I use MS-Access 2010 en Windows 7
View 3 Replies
View Related
Aug 27, 2014
I have access db sending report with outlook every Monday.
But the problem is if outlook is open when I start the db, email goes in to outgoing folder and msg box of outlook opens saying " outlook will close after countdown if I do not hit the "DO NOT EXIT" button or "EXIT AND SEND LATER" button.
If I hit "EXIT AND SEND LATER" button, it sends next time I open the outlook.
Is it possible to prevent outlook doing this?
View 14 Replies
View Related
May 13, 2015
I am trying to send a report to a list of employees. I have a query that generates the report into the layout I want and includes the e-mail address of who the recipient should be. The report looks something like this:
--Employee Name--
--E-mail address---
-Hire Date----Tenure-
-Attendance-
-Quality Score-
...etc...
I need to send, for each row in the query, this report based on the results of that particular row. How would I go about making a e-mail template that would be used, or at least sending the report as a PDF attachment? I've seen the sendObject method.
View 1 Replies
View Related
Dec 9, 2014
I have this code here that sends an email out with all the needed info. The problem i ran into was that for my field "item" it is in a table called "test" and there can be more than one record in there. I just can't get it to loop and show me all of the records. Right now it shows me only the first record. Also it is showing the name of the table before the result so i am not sure what is wrong there...
Code:
Private Sub Command4_Click()
On Error GoTo Err_SendInfo_Click
Dim varTo As Variant
Dim varCC As Variant
Dim stSubject As String
[Code] ....
View 4 Replies
View Related
Nov 12, 2014
Any code that stops the vba from running if an 'output to' function is null. I've found some code using the DCount function but I'm struggling to adapt this to multiple excel outputs.
I'm sending 5 excel files via E mail to several addresses and I'm wanting to identify if the first file has records, currently using access 2010.
View 5 Replies
View Related
Jun 27, 2015
I am using the following code but when i run it produces the following error.
Run-time error '429':
ActiveX component can't create object.
then on debug it highlights the line
Set objOutlook = CreateObject("Outlook.Application")
I have searched online and already tried a suggestion to ensure that mictosoft outlook 14.0 object library is selected in the VBA references.
Code:
Dim objOutlook As Object
Dim objMailItem As Object
Const olMailItem As Integer = 0
Set objOutlook = CreateObject("Outlook.Application")
Set objMailItem = objOutlook.CreateItem(olMailItem)
[Code] ....
View 4 Replies
View Related
Jul 9, 2013
I am sending an email from a button, and it runs a word merge and then attaches that word document and two others two an email. All that works fine, but in the body of the email the carriage return is not working.
I've tried "vbCrLf", "Chr(13)" and "Chr(10)". but none of them are working in this email. I use vbCrLf all of the time in many other emails and it works fine.
Code:
Public Function SendEmailFinancial()
Dim MessageBody, vAttach1, vAttach2, vAttach3, vTo
Dim appOutLook As Outlook.Application
Dim MailOutLook As Outlook.MailItem
[Code] ...
This is what the email is looking like when it comes out:
Project ID: 2013YG00229 Project Title: Toolbox Talks Construction Safety Guides and Mobile App Program Manager: Shana Peschek I am attaching three (3) forms that are needed in order for the State of Washington to process grant payments for your organization for the purposes of carrying out the activities outlined in your final approved application.
View 1 Replies
View Related
May 15, 2014
I am trying to create a form with a button attached to each record that would allow the user to click the button and it would automatically open outlook and fill in the TO:, SUBJECT: and BODY: fields. Here is the code that I currently have:
Code:
Private Sub Command33_Click()
Dim strEmail As String
Dim strMsg As String
Dim oLook As Object
Dim oMail As Object
Set oLook = CreateObject("Outlook.Application")
Set oMail = oLook.CreateItem(0)
[code]...
There are two issues I keep running into:
1. This code opens outlook and populates all of the fields but pastes the email incorrectly. Instead of pasting just the email (email@email.com) it pastes the html tags as well (email@email.com#mailto:email@email.com#) which means that the user would have to delete everything between the #'s in order to send the email every time.
2. I currently have the email BODY pulling from a table but this obviously limits what I can do. I would like to simply encode the BODY within the VBA code. The setup I am looking for is:
one paragraph
a blank line
a hyperlink to a website
a blank line
another paragraph
View 9 Replies
View Related
