I have to write a code in a form so that if nobody is doing any activity for 5 minutes then after 5 minutes automatically press Close button named BtnClose in that form.
View RepliesI am trying to create a form button that will automatically email each row of a query result to myself. At first the VBA code worked fine with a standard query. However when I use it with a query that contains a reference to a combobox form such as "<=[Forms]![Reminder]![Monthsleft].[Value] And >=0" I get the 3061 run-time error and "Too few parameters. Expected 1." I have included the VBA code below.
Private Sub Command9_Click()
Dim MyDb As DAO.Database
Dim rsEmail As DAO.Recordset
Dim sToName As String
Dim sSubject As String
Dim sMessageBody As String
[code]....
If you intend to renew the lease, terms and conditions will need to be submitted for ECC for approval (regardless of changes or not in lease rates). If the terms have yet to be confirmed, it is important to begin the negotiation process as soon as possible with a target to provide the ECC submission at least two months prior to the commencement date of the renewed lease. To ensure sufficient time for ECC approval before the contract expiry date, please prepare the ECC paper and obtain necessary endorsements. Submission details can be found here. The ECC submission template and PSD Questionnaire could be found from this link
DoCmd.SendObject acSendNoObject, , , _
sToName, , , sSubject, sMessageBody, False, False
.MoveNext
Loop
End With
Set MyDb = Nothing
Set rsEmail = Nothing
End Sub
Getting error '2450' when click Access close button to exit.
Run-time error '2450': ECN cannot find the referenced form 'frmLogin'.
Note: After login my login form is visible to, cause to get login user id into "frmECN" Form. But When I'm in "frmECN" Form and enter data then close to exit Access main close button I'm getting 2450 error.
I have a form that is loaded through a hyperlink from another form. On this form I have placed a command button which closes the form (DoCmd.Close) I have also used the full syntax including form name and no save prompt. When i close this form using the command button I get a request for two paramter values that are used in queries in this form (I don't want this to happen) when I click the close button on the control box "X" this doesn't happen also it doesn't happen if I use file close. This problem only occurs on some of the slower machines in my workplace, any suggestions would be greatly appreciated. The is one combo box on the form in question which is set to run a macro after update, this macro requeries the 52 list boxes on the form.
View 4 Replies View RelatedI am building a database to track employees. I have a form to input the personal information and want to close this form and open a new form to input the employee's training information. I have a cmd button to open the Training form for the individual, however I can not make it close the employee input form.
Can someone help with this?
i am abit confused.. i have a save button on my form.. this is where field validation occurs and where the closeForm statement is (at the end). I need to keep the form's "X" button enabled.. how would i go about doing this exactly.. can i keep what i currently have (in the cmdSave_click event) and in the form_close event i can maybe have if me.dirty then... call my cmdSave_click event?.. Else.. closeform. Is this the right way to go about it??.. if so.. will my formClose statement (in my cmdSave_click event) be alright?
Thanks in advance!
I have a form which I want to disable the close button. On the properties of the form I set Close Button option to 'NO'. When I open the form the form close button is disable, but as soon as I maximse this screen, the close button becomes enabled again. Any Ideas as to why this is happening and how I can disable this button comlpetely on this form?
View 2 Replies View RelatedI have a startup splash screen with a "OK" button, similar to Nortwind database. The OK button works as far as opening my switchboard page. But how do I get the Splash screen to close after I click the OK button? So I can see my switchboard page.
View 2 Replies View RelatedI am tying to create a cmd btn called "Report" that when clicked opens a form [quick report] in dialog window. I have that done easy enough. But what I want is if that form [quick report] is open, and you click the same button "Report" for it to then close the form.
View 3 Replies View RelatedRecently I set up a button to export a report automatically to Excel using the following code: DoCmd.outputTo acOutput Report, "Report1", acFormat.xls, "J:Insurance DeptReport1.xls", True.This works great, however I was wondering 2 things:
1. How do you set up to transfer multiple reports using the same button. EG I have reports named Report2, Report3, etc how do I add these to the code to export as well?
2. Is it possible to have them transfer to the one file but different sheets. EG Report1 would go to sheet1, Report2 to sheet 2, report3 to sheet 3 and so on?
Hi,
Anyone know in microsoft access 97 is it possible to remove the close button (top right hand corner) when a form is maximised?
Thanks.
I have a mainform with a combobox and a button. What i want is when i click on the combobox and then on the button I want that the textbox in the subform automatically fill in.
The mainform name is FrmTakenInvoerenEnToewijzenAanEenMonteur,
The combobox name is Keuzelijst1,
The subform name is SubTakenInvoeren,
And the textbox name is txtOpdrachtnr.
I tried this code in on button click:
Me.SubTakenInvoeren.txtOpdrachtnr = Me.Keuzelijst1
But that doesn't work.
Is it possible to create a button that automatically saves a report as .pdf? And automatically generates the filename.
Like 0810-544 (0810 is the date and 544 is the ID from the form.)
I have to write piece of code to achieve the following:
1. When the Form gets opened then timer will start.
2. It will fire BtnClose_click event automatically after 10 minutes if there is no activity for 10 minutes.
3. Whenever BtnSave is clicked by the user then reset the timer.
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
We are having a problem with mulitple users leaving an Access db open and then I am not able to make new reports, etc. without calling everyone to close their session.
Is there a way to automatically close a db if user has not used in certain amount of time?
Thanks, Noreene
I have a form I want to close but somehow the codes running before it cancel it out before my closing code can run.
Here is the full code for the form.
Code:
'Check for Null Fields
If IsNull(Me.cmb_to_customer) Or IsNull(Me.cmb_from_customer) Then
MsgBox ("Please enter a TO CUSTOMER and FROM CUSTOMER to continue.")
Cancel = True
[Code] .....
This is the ending code that will not run:
''''''''''''''''''''''''''''''''
'Continue or Not, If yes then wipe all fields, If no then exit form
If MsgBox("Do you want to log-in/transfer more batteries?", vbOKCancel, "BATTERY LOG-IN/TRANSFER") = vbCancel Then
DoCmd.Close acForm, "FRM_LOGIN"
Else
Me.cmb_from_customer = Null
[Code] ....
im try to close a form called "new job" and re-maxmise Form "main switch board"
i have manage to get my pop up form "main switch Board to minmise with Macro but unsure how to recall it when "new job" closed
All i want to do is after executing the following code, close the form " EmployeeFind" on completion?
Private Sub Form_DblClick(Cancel As Integer)
On Error GoTo Err_Form_DblClick
Dim stDocName As String
Dim Msg, Style, Title, Response
Msg = "Employee allocated to Job"
Style = vbOKCancel + vbInformation
Title = "Employee moved" ' Define title.
Response = MsgBox(Msg, Style, Title)
If Response = vbOK Then
[code]...
In the main form I have a list box, when I right click on each item on list box another form "frmshortcut" (pop up) will be open in the position of mouse that shows a list box for selecting items according to below code, now I would like when select another place (except "frmshortcut"), this form automatically will be close, like what we have in shortcut list of windows. Now when right click it is opened in the location of mouse click, but problem is, it is not closed automatically when click in other places of main form.
Option Explicit Private Type POINTAPI
x As Long y As Long End Type
Private Declare Function GetCursorPos Lib "user32" (lpPoint As POINTAPI) As Long
Private mp As [*clsMousePosition]
[Code] ....
I have a form that loads when the database is open, and the form has buttons etc. that leads to queries and reports in the database. (Queries open in a form). Since most queries take a while to load, I was wondering if there is a way to Pop up a message box stating "Please Wait, Query is running..." (or something like that), and once the form opens the MsgBox should close automatically. (The user should not have to hit Ok button.)
Most users of this database would have restricted access such that they would not have navigation pane and toolbar visible - hence I want to make it a touch more interactive when a process is running...also if someone is new to access they might not notice that taskbar status and I don't want them thinking the program is stuck etc..
I am using the method from allen browne [URL] .... to open a form and add it to a collection and when removing it it closes. actually, usually it does work so but i have now a form which does not close until i am hitting the reset button in VBE , is there something i could check why it's not functioning as desired ?
Just to add, this form has a subForm as well (might be the cause ?)
I have a subform that is used in multiple other forms. I wish to have a command button that will close whichever main form the subform is in. Is there some way I can make an if statement that is something like the following?
If (main form = A) then
Close (form A)
ElseIf (main form = B) then
Close (form B)
etc.
End if
Unfortunately the button has to be in the subform, not the main form (which would be easier). The purpose of the button is to delete the current records that are open and then close the form. The catch is that the subform is the parent record to the main form, so the command has to originate from the subform so that the cascade delete works properly.
I have a form I would like to close without saving the record using a button. here is the code I have but it closes the form and it also writes the record to the table.
Code:
Private Sub ClosewoSave_Click()
Cancel = True
Me.Undo
DoCmd.close
DoCmd.OpenForm "frmMenu"
End Sub
I found in a thread that Cancel = True would not write the record.
I have a problem when I close a form to stop it from closing if a date is not filled in.
If the field "Case_Status" is filled in with "response received" and the date field "response_received_date" is blank, it shows a message and fils in the text box with red background.
It simply fails to keep the form from closing till the date is filled in. Code I have so far:
Private Sub CloseForm_Click()
If Me.Case_Status = "response received" And IsNull(Me.response_received__date_) Then
Me.response_received__date.BackColor = RGB(255, 0, 0)
MsgBox ("Please fill in manatory fields!!!")
DoCmd.CancelEvent
Else
DoCmd.Close
End If
End Sub
I have a timer form which closes the database after a period of time with DoCmd.Quit. Another form is open at this point but if a user has left it in the middle of editing it I want to be able to save the record in the other form and close it before the timer form closes the database.
What VBA do I need in the timer form to save the record and close the other form before DoCmd.Quit? Just to be clear the code is...
Private Sub Form_Timer()
On Error Resume Next
Me.Tag = Val(Me.Tag) - (Me.TimerInterval / 1000)
Me.Caption = "The database will exit in " & Me.Tag & " seconds"
If Val(Me.Tag) <= 0 Then
[code]...