Is the following possible? If so - how?
I have a series of several hundred variables being assigned values.
If the value assigned to the variable results in an error, I would like to assign a default value to the variable which caused the error.
How do I reference the variable, or line (or any info I can work with), which caused the error?
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
I'm trying to have a command button send info on the form straight to Outlook as a meeting. So far, the code below works apart from the address bit. I need the code to automatically add the same 2 email addresses as recepients everytime.
Error message highlights the red line below with the following message:
Runtime error '438'
Object doesn't support this property or method
I'm new to VBA, so don't understand what is wrong here. The reference is set, I've tried different permutations of the "To:" & "Recipients.Add" for the email address with no joy.
Code:
Private Sub cmdSend_Click()
Dim outApp As Object
Set outApp = CreateObject("Outlook.application")
Set outmail = outApp.CreateItem(olappointmentitem)
[Code] .....
Somehow it doesn't take this variable msoFileDialogSaveAs. It tells me it's unknown.
Code:
Public Sub Command2_Click()
On Error GoTo MyError3
Dim filelocation As Variant
Dim g As Object
Set g = Application.FileDialog(msoFileDialogSaveAs)
[Code] .....
I am using Windows 8.1 64 bit system. Into attached access file (OfferStudy.accdb) ,trying to load an activeX TreeView control by defining into a form module. First, I created an empty form and activeX Treeview control.When I define tv variable As TreeView as created in application, it is changing as Dim tv As treeView instead of TreeView. After my code is completed,an error message ("user-defined type not defined") is returning as shown in attached (DebugError.png)file.
I suppose that there is some conflict on creating activeX control on my Access 2013 application.
I am trying to pass a boolean variable to a class module
Code:
Set rps.ViewS = View
the code in the module that this in theory is calling reads as
Code:
Private ViewC As Boolean
Public Property Set ViewS(ByRef ViewA As Boolean)
Set ViewC = ViewA
End Property
Public Property Get ViewS() As Boolean
Set ViewS = ViewC
End Property
However I am getting the error message
Quote:Definitions of property procedures for the same property are inconsistent, or property procedure has an optional parameter, a ParamArray, or an invalid Set final parameter.
I have some code that will run if I am populating an empty table(no duplication's possible) but now I am trying to create a Sub to check for existence of a record and handling it going forward.
Anyways the big picture is looping through a text file and placing data where it needs to go. The code follows including some comments point to the issue.
Code:
Sub PutinNewTag(TableIn As String, Tagtype As String, textline As String)
Dim strSQL As String
Dim NameIn As String
Dim TagName As String
Dim Db As DAO.Database
Dim rstin As DAO.Recordset
[Code] ....
I am creating a 2 level report to confirm an order. Main report already created, runs successfully called as subform/subreport under "OrderDetails" form. Linked to master using Order.ID. There are two versions of the confirmation report that have different layouts for different program types.
The hangup comes when I try to add a "Class Dates" subreport. It lists dates of individual classes and Skip dates. I have created the subreport as "srClassDates". When I add it to the main report, it lists the records. However, when I try to link it to the Main report, an error message box appears with the "object variable or With block variable not set".
I have tried rebuilding both the main and subreports, rebuilt the query, have not found anything that changes the result.
Linker has been working successfully on other subforms. Report with groupings works fine, but I need data from 2 tables both linked to order.id.
I have a VERY simple select statement that I am using in a pass-through query: "SELECT * FROM dbo_vReturn;", but I cannot get this to work. Each time I run the query it generates an error: "ODBC call failed - Invalid object name "dbo_vReturn" (#208)".
The dbo_vRteturn is a view in the backend. I can open this table/view from Access using an ODBC connection but when I try to run the pass-through query it falls over!
Does anyone have any idea what is causing this?:confused:
Hi all, this is my first post, I'll try and make it a good one :-)
System:
Windows 2000
Office 2000
I have a small network of PC's here which have access to our central database. I have a simple form created using the label wizard which is used to print address labels for mailing lists.
On most of the PC's here it works fine but on one or two (which have no obvious difference in thier setup) I get an "ODBC--Call Failed" error and it won't run the report????
I have puzzled over this for a while when I decided that I would remove the Trim function from the lines of the address fields on the label, these are put in automatically by the label wizard. This stopped the error message and the reports now run.
I don't know why this is happening but I am hoping someone will.
Thanks,
Matt.
I am forced to switch from a DSN connection to my database to a DSNless connection by my hosting company. I changed my connection string from this:
strConn = "dsnname"
set MyConn=Server.CreateObject("ADODB.Connection")
MyConn.Open strConn
to the following:
set MyConn=Server.CreateObject("ADODB.Connection")
MyConn.Open = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=d:pathtodatabasemydb.mdb;"
I connect fine. But when I run a certain query, I get the following error:
Microsoft JET Database Engine error '80040e14'
The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect.
The SQL statement in question here is:
SELECT MAX(week) AS LAST FROM Schedule WHERE Result <>''
If I change my connection back to the original DSN connection, everything is fine once again.
How would a different connection produce an error, and more importantly, how do I fix it?
Thanks,
Ted
Hi can anyone help me with this query?
'SQLTable "Resolutions Per Year", "SELECT ResName, COUNT(ResName) AS Total FROM Stats LEFT JOIN Resolutions ON (Stats.UserID = Resolutions.UserID AND Stats.ResID=Resolutions.ResID) WHERE Stats.UserId = '"&login&"' AND Date LIKE '%sYear%' GROUP BY Stats.UserID, ResName ORDER BY COUNT(ResName) DESC"
sYear is a variable
example sYear = 2003,2004,2005....
This does not work.
Is there anyway to assign the search string to be a variable?
Hi
I am assigning a value from a table to text box on the form through VBA. It gives the following error :
Run time error 2115
The macro or function set to the BeforeUpdate or ValidationRule property for this field is preventing MS Access from saving the data in the field. I have no BeforeUpdate or Validation event for the text box. What else could be the cause ?
The text box is unbound and I use ADODB connection.
Please assist.
Hi,
I am absolutely puzzeled with a problem we are having with an Ms Access 2000 application, which is the front end to a SQL Server database. We have a database which was working fine for over 6 months. And now all of sudden users are intermittently getting the error messages:
"Error Executing this command"
AND
"You cancelled the previous operation."
I removed the error handling code from the application to get more detailed error messages and we got the following error message:
The expression On Click you entered as the event property setting produced the following error: .
The expression may not result in the name of a macro, the name of a user-defined function, or [Event Procedure].
There may have been an error evaluating the function, event, or macro.
This is only intermittent and when they close the database and open it again it works fine for a little while and then the error occurs again. As you can imagine this is a major inconvenience for users.
I have searched the web and forums and there just seems to be 101 reasons why this could happen. Nothing has changed on our system which might cause this occur so I don't know why this is happening.
Could anybody provide any ideas on how I might go about trouble shooting it. We are thinking of opening a support call with Microsoft but the error messages are so generic that I'm not sure what help they could be.
Any help / ideas or suggestions would be greatly appreciated.
Many Thanks
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
The following code is in the Form Current. As you can see if BranchCode = 2 I want to do a DLookup on the SystemPreferences table that holds a number Branch fields that hold document archive numbers for that branch. I want to move the number in the CroArchiveNo field into the field ArchiveNumber. I then run an Update Query on the system preferences table to add one to the relative branch archive number.
If Me.[BranchCode] = 2 Then
Me.[ArchiveNumber] = DLookup("[CroArchiveNo]", "SystemPreferences", "[SysPrefId] = 1")
DoCmd.SetWarnings False
DoCmd.OpenQuery "UpdateCroArchiveNo"
DoCmd.SetWarnings True
End If
My problem is that I get an error
Run Time error 2448
You can't assign a value to this object
I have a report with many unbound fields with expressions (over 200). I've began getting this error message. This may seem like a dumb question but what does it mean when it speaks of simplifying the expression by assigning parts to variables. I put a few examples of some of the expressions below.
"This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables."
=Count(IIf([District]=1,0))
=Count(IIf([District]=1,IIf([FSL]=4,0)))
=[D1Final4]+[D1Waiver4]+[D1PreMist4]
=[D1TotalCom4]/[D1TotalReq4]
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer
LR = 5
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set wbRef = xlApp.Workbooks.Add
With wbRef
wbRef.Activate
.Worksheets("Sheet1").Activate
With ActiveSheet
.Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes
End With
end With
I look at a lot of files to see when they were last updated. I wanted to write a generic procedure to manage that so ..
Code:
Public fDate As Variant
Public vField As String
Public vFile As String
'GTSdata
vField = "txt_gts_data"
[Code] ....
What I hoped Me.vField would do is update the date field [txt_gts_data] on my form with the date the file was last saved.
i.e. me. txt_gts_data = fDate
What actually happens is the variable vfield gets updated from "txt_gts_data" to 19/08/2014 then later code falls over because the fieldname is lost .
Me.[vField] corrects itself to me.vField (and does not work)
Me!vfield falls over (cannot find the field vField, not surprising J)
How do I say update the contents of the variable, not the variable itself?
I am working on an app, that has a field named "Name". I have everything set up with a module, which, for example, the name "John", it assigns 1. when it sees "John" again it assigns 2. Then "Jane" It assigns 1 again. I want the module to see every instance of "John" to assign the same number, 1, then all instances of "Jane" 2, etc. Here is the code in the module I am using, but it is assigning the values wrong. My final plan is to use the numbers for conditional formatting, so all johns one color, all janes, a different color. I can't use the conditional formatting wizard because these names pop up at random, and the names populate at random.
Option Compare Database
Global GBL_Category As String
Global GBL_Icount As Long
Public Function Increment(ivalue As String) As Long
If Nz(GBL_Category, "zzzzzzzz") = ivalue Then
GBL_Icount = GBL_Icount + 1
' MsgBox icount
Else
GBL_Category = ivalue
GBL_Icount = 1
End If
Increment = GBL_Icount
End Function
I have two tables. The first is a list of users. The second is a list of projects. I need to loop through the user list and assign each one to a project. At the end of the user list it will just start over at the top until all the projects have someone assigned to it. What is the best way to do this?
Table1 Users
User1
User2
User3
Assignments
ProjectAssigned To
Project1
Project2
Project3
Project4
Project5
Project6
After processing.
ProjectAssigned To
Project1User1
Project2User2
Project3User3
Project4User1
Project5User2
Project6User3
How can I assign some type of index to the below variables (data representation) ? I'm using VBA to build a .RFT file for MS Word.
"Line # 1 data"
"Line #2 data"
"Line #3 data"
. . . .
"Line #7 data"
"Line #8 data"
"Line #9"
. . . .
"Line # 22 data"
"Line #23 data"
"Line #24 data"
I have a multiuser split db with this code on a listbox:
Code:
Private Sub lstsearch_DblClick(Cancel As Integer)
' The following is the variable definition for the error handler
On Error GoTo lstsearch_DblClick_Error
Dim ErrorForm As String
Dim ErrorControl As String
[Code] ....
The error function sends me an e-mail listing the error, user, form and sub. Ocasionally some users get error 3049 when running this sub. It is generally one user out of about 10 or so and the db keeps working fine for everyone else. I have reviewed the back end several times and I cannot find any obvious corruption signs. I have compacted and repaired it several times with very small changes is size.
I'm trying to export a report as PDF giving it a name at the same time. I'll then email this out.
The email bit I'm fine with, but I'm struggling to get the report to save as a PDF
Dim outputFileName As String
outputFileName = CurrentProject.Path & "Mail_MergesTemplatesBulkEmail Quote From Dialler" & "Quote" & [Quote_URN] & ".csv"
DoCmd.OutputTo acOutputReport, "Digital Service Cover Quote", acFormatPDF, outputFileName
I got one months table containing a reporting_month ,timeperiod and an Index column ID with data type Autonumber.Basically I want to search through the table whenever the User types in a new reporting month or timeperiod over the dialogue.Now I want to realize the following options:
1. The user types in a new reporting month, when a record in the months table exists with a timeperiod and a blank reporting month field, it should be assigned there. For example the User types in reporting month = 032014 it should be assigned to the Time_Period Value = 042014-032015
2. Vice versa, the user types in a time period. This value shuold be assigned to the blank field beneath the existing reporting month.
My scenario is that I am using a one time table that is a copy of my real transaction table (called GLAcTranLine) to enter general ledger transactions. Both my form and my sub-form are unbound. The form is called GLFI50 and the sub form is called GLFI50TranSub on disk and inside the main form. That is, both the sub form and its description inside the form (in the label that appears when I build the sub form with the wizard) bear that name.
So in the load for the main form I carry out these job steps.
1. I take a "No Data" copy of the transaction table GLAcTranLine, to get the structure. That works fine. The name I give to it is prefaced with GLFI50 and ends with a random number. That works fine too.
2. I insert a blank record into the new table. That also works fine.
3. Assign the control source to the Sub form and to its individual objects. That just dies in a crumpled heap. Neither the form not the individual columns code works.
The error I get (in both cases) is the Run-time error '2465' Application-defined or object-defined error.
I believe this means that it just cannot work out what idiotic error I have made. The code all passes the compiler test.
Here is the SUB.
Private Sub Form_Load()
'STEP 1. I take a "no data" copy of Create the Work Table and assign it as a control source to the sub form
'================================================= ======================
'(Copies the structure of the source table to a new target one. It isn't a temporary table so I need to
'find a way of assigning a temporary name and then using that name on this prog.
'The True on the end says "Do not copy the data)"
'GLFI50Work is the Global variable that holds the temporary table name.
Dim RandomInt As Single
[Code] .....